MSPUPT15RE3 [MICROSEMI]
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2;型号: | MSPUPT15RE3 |
厂家: | Microsemi |
描述: | Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2 局域网 光电二极管 |
文件: | 总3页 (文件大小:165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UPT5e3 – UPT48e3
UPT5Re3 – UPT48Re3
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSORS
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
Microsemi’s new Powermite UPT series transient voltage suppressors
feature oxide-passivated chips, with high-temperature solder bonds for high
surge capability, and negligible electrical degradation under repeated surge
conditions. Both unidirectional and bidirectional configurations are available.
In addition to its size advantages, Powermite package includes a full
metallic bottom (cathode) that eliminates possibility of solder flux entrapment
at assembly and a unique locking tab serving as an integral heat sink.
DO-216AA
Innovative design makes this device fully compatible for use with automatic
insertion equipment.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Powermite Package with standoff voltages 5 to 48 V
•
Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.
Both Unidirectional polarities and Bidirectional:
Anode to case bottom (UPT5e3 thru UPT48e3)
Cathode to case bottom (UPT5Re3 thru UPT48Re3)
Bidirectional (UPTB8e3 thru UPTB48e3)
•
•
Protection from switching transients & induced RF
New improved lower leakage current for the
UPT5Re3
•
•
•
Clamping time less than 100 pico-seconds for
unidirectional
•
•
•
Integral heat sink / locking tabs
Full metallic bottom eliminates flux entrapment
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, or JANTXV are available by
adding MQ, MX, or MV, prefixes respectively to part
numbers, e.g. MXUPT15e3, MVUPTB28e3,
MSPUPU10e3, etc.
•
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: UPT5//UPT5R/UPTB8 to17
Class 2: UPT5//UPT5R/UPTB8 to12
(also add e3 suffix to each part number)
•
RoHS Compliant with e3 suffix part number
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
CASE: Void-free transfer molded thermosetting
epoxy compound meeting UL94V-0
FINISH: Annealed matte-Tin plating over copper
and readily solderable per MIL-STD-750, method
2026
•
•
Operating and Storage Temperature: –65ºC to
+150ºC
Peak Pulse Power at 8/20 µs (See Figure 1 and 2)
UPT5Re3: 600 Watts
UPT5e3 thru UPT48e3: 1000 Watts
UPT8Re3 thru UPT48Re3: 1000 Watts
UPTB8e3 thru UPTB48e3: 1000 Watts
Peak Pulse Power at 10/1000 µs (See Figure 2).
UPT5Re3: 100 Watts
•
•
POLARITY: Cathode or anode to TAB 1 (bottom)
as described in Marking below and Figure 5
MARKING:
Anode to TAB 1: T plus the last two digits of part
number, e.g. UPT5e3 is T05▪, UPT12e3 is T12▪
Cathode to TAB1: U plus last two digits of part
number, e.g. UPT5Re3 is U05▪, UPT12Re3 is U12▪
Bipolar: B plus the last two digits of part number,
e.g. UPTB8e3 is B08▪, UPTB12e3 is B12▪, etc.
Please note dot suffix (for e3 suffix)
•
UPT5e3 thru UPT48e3: 150 Watts
UPT8Re3 thru UPT48Re3: 150 Watts
UPTB8e3 thru UPTB48e3: 150 Watts
Impulse Repetition Rate (duty factor): 0.01%
•
•
•
•
•
WEIGHT: 0.016 gram (approximate)
Thermal resistance: 15ºC/W junction to base tab or
240ºC/W junction to ambient when mounted on FR4
PC board with 1 oz copper
See package dimension on last page
Tape & Reel option: Standard per EIA-481-B using
12 mm tape with 3,000 per 7 inch reel or 12,000
per 13 inch reel (add TR7 or TR13 suffix to part
number)
•
•
Steady-State Power: 2.5 Watts (base tab ≤112ºC)
Solder Temperatures: 260ºC for 10 s (maximum)
Copyright © 2007
6-26-2007 REV G
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
UPT5e3 – UPT48e3
UPT5Re3 – UPT48Re3
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSORS
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS @ 25oC
RATED
MINIMUM
MAXIMUM
STANDBY
CURRENT
MAXIMUM
PEAK
PULSE
CURRENT*
IPP
MAXIMUM
CLAMPING
VOLTAGE
MAXIMUM
TEMP.
COEFFICIENT
STANDOFF
VOLTAGE
BREAKDOWN
VOLTAGE
DEVICE TYPE
(add e3 suffix)
of V(BR)
VWM
V
(BR) @ 1 mA
ID @ VWM
VC @ 10A*
αV(BR)
%/oC
.030
.030
.040
.045
.050
.055
.060
.070
.075
.080
.090
Unidirectional
Bi-directional
V
5
V
6.0
6.0
9.0
11.0
13.8
16.7
19.0
28.4
31.0
36.8
54.0
A
89.4
60
V
9.5
9.5
μA
50
5
2
2
1
1
1
1
UPT5
UPT5R
5
UPT8 & UPT8R
UPT10 & UPT10R
UPT12 &UPT12R
UPT15 & UPT15R
UPT17 & UPT17R
UPT24 & UPT24R
UPT28 &UPT28R
UPT33 &UPT33R
UPT48 &UPT48R
UPTB8
UPTB10
UPTB12
UPTB15
UPTB17
UPTB24
UPTB28
UPTB33
UPTB48
8
62.1
47.2
40.3
33.9
30.8
22.0
19.2
16.4
11.2
13.7
18.0
21.6
26.0
29.2
43.2
47.8
56.7
84.3
10
12
15
17
24
28
33
48
1
1
1
* See Figure 1 for IPP waveform of 8/20 µs
SYMBOLS & DEFINITIONS
Symbol
V(BR)
Definition
Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Standoff Voltage: The maximum peak voltage that can be applied over the operating
temperature range.
VWM
Peak Pulse Power: The peak power that can be applied for a specified pulse width and waveform.
PPP
ID
IPP
C
Standby Current: The maximum current that will flow at the specified voltage and temperature.
Peak Pulse Current: The peak current that can be applied for a specified pulse width and waveform.
Capacitance: The capacitance in picofarads of the TVS as defined @ 0 volts at a frequency of 1 MHz.
OUTLINE AND CIRCUIT
tp: Pulse time duration is defined as
that point where the pulse current
EXPONENTIAL PULSE
(Pulse time duration is defined as
that point where the pulse current
decays to 50% of IPP
.
(Rise time to 100% of IPP = 8μs.)
decays to 50% of IPP.)
t – TIME – (μs)
tp – PULSE TIME
FIGURE 1
FIGURE 2
Pulse Waveform for Exponential Surge
Peak Pulse Power vs. Pulse Duration
Copyright © 2007
6-26-2007 REV G
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
UPT5e3 – UPT48e3
UPT5Re3 – UPT48Re3
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSORS
S C O T T S D A L E D I V I S I O N
measured at zero bias
measured at VWM
TEMPERATURE – (oC)
VWM – STAND-OFF VOLTAGE – (V)
FIGURE 4
FIGURE 3
Derating Curve
Typical Capacitance vs. Stand-Off Voltage
DIMENSIONS
All dimensions +/-.005 inches
MOUNTING PAD in inches
FIGURE 5
Copyright © 2007
6-26-2007 REV G
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号:
MSPUPT15RE3/TR13
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15RE3/TR7
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15RTR13
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15RTR13E3
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15RTR7
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15RTR7E3
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15TR13
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15TR13E3
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15TR7
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT15TR7E3
Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT17
Trans Voltage Suppressor Diode, 150W, 17V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, PLASTIC, POWERMITE-2
MICROSEMI
MSPUPT17E3
Trans Voltage Suppressor Diode, 150W, 17V V(RWM), Unidirectional, 1 Element, Silicon, DO-216AA, ROHS COMPLIANT, PLASTIC, POWERMITE-2
MICROSEMI
©2020 ICPDF网 联系我们和版权申明