MXSMCJLCE6.5AE3TR [MICROSEMI]
Trans Voltage Suppressor Diode, 1500W, 6.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN;
| 型号： | MXSMCJLCE6.5AE3TR |
| 厂家： | 
Microsemi |
| 描述： | Trans Voltage Suppressor Diode, 1500W, 6.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN 局域网 光电二极管 |
| 文件： | 总4页 (文件大小：316K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
- High Reliability controlled devices
- Unidirectional (A) construction
- Available in both J-bend and Gull-wing terminations
- Selections for 6.5 to 170 V standoff voltages (VWM)
SURFACE MOUNT
1500 Watt Low Capacitance
Transient Voltage Suppressor
LEVELS
M, MA, MX, MXL
DEVICES
MSMCJLCE6.5A thru MSMCJLCE170A, e3
and MSMCGLCE6.5A thru MSMCGLCE170A, e3
FEATURES
.
.
.
.
High reliability controlled devices with fabrication and assembly lot traceability
100% surge tested devices
Low capacitance of 100 pF or less
Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes
specify various screening and conformance inspection options based on MIL-PRF-19500. Refer
to MicroNote 129 for more details on the screening options.
.
.
.
.
Axial-lead equivalent packages for thru-hole mounting available as MLCE6.5A to MLCE170CA
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current ID
APPLICATIONS / BENEFITS
.
.
.
1500 Watts of Peak Pulse Power at 10/1000 s
Low capacitance for data line protection to 1 MHz
Protection for aircraft fast data rate lines up to Level 5 Waveform 4 and Level 2 Waveform 5A in
RTCA/DO-160D (also see MicroNote 130) & ARINC 429 with bit rates of 100 kb/s (per ARINC
429, Part 1, par 2.4.1.1)
.
.
.
IEC 61000-4-2 ESD 15 kV (air), 8 kV (contact)
IEC 61000-4-5 (lightning) as further detailed in MLCE6.5 thru MLCE170A data sheet
T1/E1 Line Cards
.
.
Base Stations, WAN & XDSL Interfaces
CSU/DSU Equipment
MAXIMUM RATINGS
.
.
Peak Pulse Power dissipation at 25 ºC: 1500 watts at 10/1000 μs (also see Figures 1,2, and 3)
with impulse repetition rate (duty factor) of 0.01 % or less
Clamping Factor: 1.40 @ Full Rated power:
1.30 @ 50 % Rated power
.
.
.
.
.
tclamping (0 V to VBR min): Less than 5x10-9 seconds
Operating and Storage temperatures: -65 ºC to +150 ºC
Steady State power dissipation: 5.0W @ TL = 50 ºC
Thermal Resistance: 20 ºC /W (typical junction to lead (tab) at mounting plane
When pulse testing, do not pulse in opposite direction. (See “Schematic Applications” section
herein and Figures 5 & 6 for further protection in both directions)
.
Solder temperatures: 260 ºC for 10 s (maximum)
RF01002 Rev A, June 2010
High Reliability Product Group
Page 1 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
________________________________________________________________________________________________________________________________
MECHANICAL AND PACKAGING
.
.
Void-free transfer molded thermosetting epoxy body meeting UL94V-0
Gull-wing or J-bend tin-lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) compliant annealed matte-tin plating
solderable per MIL-STD-750, method 2026
.
.
.
.
Cathode indicated by band. No cathode band on bi-directional devices.
Part number marked on package
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL option available with up to 750 per 7 inch reel or up to 2500 per 13 inch reel EIA-481-B with 16
mm tape. Add “TR” suffix to part number.
.
Weight: 0.25 gram (approximately)
PACKAGE DIMENSIONS
(SMCJ)
(SMCG)
DIMENSIONS IN INCHES
A
B
C
D
E
F
K
.025
.040
L
.030
.060
MIN
MAX
.115 .260 .220 .305 .077 .380
.121 .280 .245 .320 .104 .400
DIMENSIONS IN MILLIMETERS
MIN
2.92 6.60 5.59 7.75 1.95 9.65
0.635 .760
MAX
3.07 7.11 6.22 8.13 2.65 10.16 1.016 1.520
Typical Standoff Height: 0.004” – 0.008” (0.1mm – 0.2mm)
(DO-214AB)
(DO-215AB)
PAD LAYOUT
SMCG (DO-215AB)
SMCJ (DO-214AB)
INCHES
0.510
0.110
mm
12.95
2.79
3.81
INCHES
0.390
0.110
mm
9.90
2.79
3.81
A
B
C
A
B
C
0.150
0.150
SYMBOLS & DEFINITIONS
Symbol
VWM
PPP
Definition
Symbol
Definition
Peak Pulse Current
Clamping Voltage
Breakdown Current for VBR
Working Peak (Standoff) Voltage
Peak Pulse Power
Breakdown Voltage
Standby Current
IPP
VC
VBR
ID
IBR
RF01002 Rev A, June 2010
High Reliability Product Group
Page 2 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
________________________________________________________________________________________________________________________________
ELECTRICAL CHARACTERISTICS @ 25oC
Reverse
Stand-Off
Voltage
VWM
Breakdown Voltage
VBR @ IBR
Maximum
Reverse
Leakage
ID @ VWM
Maximum
Clamping
Voltage
Maximum
Peak Pulse
Current IPP
@10/1000
Maximum
Capacitance
@ 0 Volts,
f = 1 MHz
Working
Inverse
Blocking
Voltage
VWIB
Inverse
Blocking
Leakage
Current
IIB
Peak
Inverse
Blocking
Voltage
VPIB
MICROSEMI
PART NUMBER
VC @ IPP
GULL-WING
J-BEND
V
VMIN VMAX
mA
V
A
pF
V
V
A
A
MSMCGLCE6.5A
MSMCGLCE7.0A
MSMCJLCE6.5A
MSMCJLCE7.0A
6.5
7.0
7.22
7.78
7.98
8.60
10
10
1000
500
11.2
12.0
100
100
100
100
75
75
10
10
100
100
MSMCGLCE7.5A
MSMCGLCE8.0A
MSMCJLCE7.5A
MSMCJLCE8.0A
7.5
8.0
8.33
8.89
10.2
9.83
10
1
250
100
14.3
13.6
100
100
100
100
75
75
10
10
100
100
MSMCGLCE8.5A
MSMCGLCE9.0A
MSMCGLCE10A
MSMCGLCE11A
MSMCJLCE8.5A
MSMCJLCE9.0A
MSMCJLCE10A
MSMCJLCE11A
8.5
9.0
10
9.44
10.0
11.1
12.2
10.4
11.1
12.3
13.5
1
1
1
1
50
10
5
14.4
15.4
17.0
18.2
100
97
88
100
100
100
100
75
75
75
75
10
10
10
10
100
100
100
100
11
5
82
MSMCGLCE12A
MSMCGLCE13A
MSMCJLCE12A
MSMCJLCE13A
12
13
13.3
14.4
14.7
15.9
1
1
5
5
19.9
21.5
75
70
100
100
75
75
10
10
100
100
MSMCGLCE14A
MSMCGLCE15A
MSMCJLCE14A
MSMCJLCE15A
14
15
15.6
16.7
17.2
18.5
1
1
5
5
23.2
24.4
65
61
100
100
75
75
10
10
100
100
MSMCGLCE16A
MSMCGLCE17A
MSMCJLCE16A
MSMCJLCE17A
16
17
17.8
18.9
19.7
20.9
1
1
5
5
26.0
27.6
57
54
100
100
75
75
10
10
100
100
MSMCGLCE18A
MSMCGLCE20A
MSMCJLCE18A
MSMCJLCE20A
18
20
20.0
22.2
22.1
24.5
1
1
5
5
29.2
32.4
51
46
100
100
75
75
10
10
100
100
MSMCGLCE22A
MSMCGLCE24A
MSMCJLCE22A
MSMCJLCE24A
22
24
24.4
26.7
26.9
29.5
1
1
5
5
35.5
38.9
42
39
100
100
75
75
10
10
100
100
MSMCGLCE26A
MSMCGLCE28A
MSMCJLCE26A
MSMCJLCE28A
26
28
28.9
31.1
31.9
34.4
1
1
5
5
42.1
45.5
36
33
100
100
75
75
10
10
100
100
MSMCGLCE30A
MSMCGLCE33A
MSMCGLCE36A
MSMCGLCE40A
MSMCGLCE43A
MSMCGLCE45A
MSMCGLCE48A
MSMCGLCE51A
MSMCGLCE54A
MSMCGLCE58A
MSMCGLCE60A
MSMCGLCE64A
MSMCJLCE30A
MSMCJLCE33A
MSMCJLCE36A
MSMCJLCE40A
MSMCJLCE43A
MSMCJLCE45A
MSMCJLCE48A
MSMCJLCE51A
MSMCJLCE54A
MSMCJLCE58A
MSMCJLCE60A
MSMCJLCE64A
30
33
36
40
43
45
48
51
54
58
60
64
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
1
1
1
1
1
1
1
1
1
1
1
1
5
5
5
5
5
5
5
5
5
5
5
5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
31
100
100
100
100
100
100
100
100
100
100
90
75
75
75
10
10
10
10
10
10
10
10
10
10
10
10
100
100
100
100
200
200
200
200
200
200
200
200
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
75
150
150
150
150
150
150
150
150
90
MSMCGLCE70A
MSMCGLCE75A
MSMCJLCE70A
MSMCJLCE75A
70
75
77.8
83.3
85.0
92.1
1
1
5
5
113
121
13.3
12.4
90
90
150
150
10
10
200
200
MSMCGLCE80A
MSMCGLCE90A
MSMCJLCE80A
MSMCJLCE90A
80
90
88.7
100
98.0
111
1
1
5
5
129
146
11.6
10.3
90
90
150
300
10
10
200
200
MSMCGLCE100A
MSMCGLCE110A
MSMCJLCE100A
MSMCJLCE110A
100
110
111
122
123
135
1
1
5
5
162
178
9.3
8.4
90
90
300
300
10
10
200
400
MSMCGLCE120A
MSMCGLCE130A
MSMCJLCE120A
MSMCJLCE130A
120
130
133
144
147
159
1
1
5
5
193
209
7.8
7.2
90
90
300
300
10
10
400
400
MSMCGLCE150A
MSMCGLCE160A
MSMCJLCE150A
MSMCJLCE160A
150
160
167
178
185
197
1
1
5
5
243
259
6.2
5.8
90
90
300
300
10
10
400
400
MSMCGLCE170A
MSMCJLCE170A
170
189
231
1
5
304
4.9
90
300
10
400
NOTE 1: TVS are normally selected according to the reverse “Stand Off Voltage” (VWM) which should be equal to or greater
than the dc or continuous peak operating voltage level.
RF01002 Rev A, June 2010
High Reliability Product Group
Page 3 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
________________________________________________________________________________________________________________________________
GRAPHS
tp – Pulse Time – sec
Test wave form parameters
T – Temperature – ºC
tr = 10 s, tp = 1000 s
FIGURE 1 Peak Pulse Power vs. Pulse Time
FIGURE 2 Pulse Waveform
FIGURE 3 Derating curve
SCHEMATIC APPLICATIONS
The TVS low capacitance device configuration is shown in Figure 4. As a further option for unidirectional applications, an additional
low capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 5. In
applications where random high voltage transients occur, this will prevent reverse transients from damaging the internal low
capacitance rectifier diode and also provide a low voltage conducting direction. The added rectifier diode should be of similar low
capacitance and also have a higher reverse voltage rating than the TVS clamping voltage VC. The Microsemi recommended
rectifier part number for the application in Figure 5 is the “SMBJLCR80” or “SMBGLCR80” depending on the terminal configuration
desired. If using two (2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for
both directions (including the reverse of each rectifier diode) is inherently provided in Figure 6. The unidirectional and bidirectional
configurations in Figure 5 and 6 will both result in twice the capacitance of Figure 4.
FIGURE 4
FIGURE 5
FIGURE 6
TVS with internal low
capacitance rectifier diode
Optional Unidirectional
configuration (TVS and
separate rectifier diode
in parallel)
Optional Bidirectional
configuration (two TVS
devices in anti-parallel)
RF01002 Rev A, June 2010
High Reliability Product Group
Page 4 of 4
相关型号：
MXSMCJLCE6.5ATR
Trans Voltage Suppressor Diode, 1500W, 6.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMCJ, 2 PIN
MICROSEMI
MXSMCJLCE6.5E3
Trans Voltage Suppressor Diode, 1500W, 6.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
MXSMCJLCE6.5E3/TR
Trans Voltage Suppressor Diode, 1500W, 6.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC PACKAGE-2
MICROSEMI
MXSMCJLCE60AE3/TR
Trans Voltage Suppressor Diode, 1500W, 60V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
MXSMCJLCE60E3
Trans Voltage Suppressor Diode, 1500W, 60V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC PACKAGE-2
MICROSEMI
MXSMCJLCE60E3/TR
Trans Voltage Suppressor Diode, 1500W, 60V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC PACKAGE-2
MICROSEMI
©2020 ICPDF网 联系我们和版权申明