PD24012L [MICROSEMI]

Interface Circuit;
PD24012L
型号: PD24012L
厂家: Microsemi    Microsemi
描述:

Interface Circuit

文件: 总4页 (文件大小:517K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TM  
TM  
Introduction: DAZL!TM LED Drivers  
Value Proposition  
Advanced Power Management - To minimize overall  
system power dissipation, DAZL! adaptively control RGB  
power supplies output voltage levels based on advance  
power management algorithm.  
Microsemi's DAZL! Family of mixed signal high voltage LED  
driver ICs is designed for LCD panel backlights using strings  
of either red, green, and blue (RGB) or white LEDs.  
Fault Detection - DAZL! ICs constantly monitor the cur-  
rent and voltage of all LED strings at a high sample rate.  
This data is saved and sent to a companion PD23000  
32-bit system controller.  
The high sample rate enables the system controller to  
respond quickly to detected faults due to LED opens  
and/or shorts.  
Advanced Control of Color & Brightness Uniformity -  
DAZL! ICs feature individually controlled internal PWMs  
for each of their 12 ports. Frequencies range from 150Hz  
to 16KHz. Individual PWMs allow for independent control  
of the current in each string, adjusting automatically for  
current mismatches between strings to enable more accu-  
rate color and brightness uniformity.  
DAZLTM LED drivers are ideal for LCD TVs and other  
large LCD-based displays.  
Advanced Backlight features - The advanced features  
of the DAZL! Family enables it to support zone dimming  
(D2) and scanning backlights (D1). Multiple bus interfaces  
in the form of two SPI buses that can work in parallel offer  
higher bandwidth--and the ability to control up to 30  
PD24012 ICs and 360 LED strings with a single PD23000  
32-bit system controller.  
The DAZL! Family integrates all necessary power,  
analog and logic functions while supporting multiple LED  
strings in a compact monolithic package.The ICs drives LED  
strings, while simultaneously monitoring and measuring  
backlight string voltage and current to control power supply  
voltage for optimum performance.  
Risk & Cost Reduction - The DAZL! Family is designed  
to provide significant cost reductions for LED backlight  
manufacturers. The independent PWMs on each of the 12  
ports allow LED strings of any color to be connected to  
any port. This flexibility provides a universal solution to  
accommodate a variety of LED string combinations, such  
as 4R-4G-4B or 3R-6G-3B LEDs. Identical packages and  
pin outs between the PD24012H and PD24012L drivers  
allow for similar architecture, design and layout considera-  
tions for both low-power and high-power LEDs, reducing  
development time and risk for a faster time-to-market.  
The DAZL! Family consists of two ICs, designed for back-  
light units having either high-power or low-power LEDs:  
For high-power LEDs, the PD24012H is capable of driving  
external MOSFETs for a string current of up to 1.5A on each  
of 12 ports.  
For low-power LEDs, the PD24012L features on-chip  
MOSFETs capable of driving a string current of up to 60mA  
on each of its 12 ports. With 65V output voltage supporting  
each LED string, the PD24012L can accommodate at least  
15 low power LEDs per string without external MOSFETs.  
(~ Vf = 3.5V)  
Both DAZL! driver ICs feature 12 independent ports capable  
of driving 12 LED strings. Each string is controlled by inde-  
pendent PWM circuitry that adjusts string current for the  
desired color and intensity.  
Pin Configuration  
Current, output port voltage and temperature are monitored  
separately for sophisticated control of each LED string. A  
temperature sensor at each port automatically shuts down  
the port in the event of excessive thermal stress.  
All PD24012 driver ICs are designed to support a full set of  
advanced features including scanning backlight (D1) and  
zone dimming (D2). They also support two external SPI  
buses that can work independently, or in parallel.  
A single SPI bus provides full functionality. When in parallel,  
one SPI bus is used for initialization and monitoring of val-  
ues, while the second interfaces directly to a video con-  
troller, enabling direct control of enable/disable ports and  
PWM values.  
DAZL! Features  
Evaluation Environment  
LED Driver:  
• 12 ports to drive 12 LED strings  
Performance of PD24012 ICs can be fully evaluated using  
the Microsemi PD25000EV Evaluation Board.  
• Low power LEDs (up to 60mA) driven  
by internal MosFETs  
• High Power LEDs (up to 1.5A)  
driven by external MosFETs  
• Up to 2.1W chip power dissipation  
Communication Interface:  
• 2x SPI buses for:  
- Enhanced SPI for system control  
- SPI to system host - such as video  
controller  
- Direct interface to color manager  
Protection:  
• Short Circuit Protection  
• Open Circuit indication  
• Over Temperature Protection  
PWM:  
• 12 PWMs (each port has its own PWM)  
• Frequency 150Hz-16KHz  
Power Supply:  
• Operating Supply Voltage: 5V  
• Output Voltage: 65V  
• I/O Voltage: 3.3V or 5V  
Working Modes  
• Normal Mode for standard operation  
• Sleep Mode for power saving  
Operating Temperature: -20°C to +85°C  
Package: LQFP  
RoHS Compliant  
PD24012H  
PD24012L  
LED Driver supporting  
High Power LEDs using  
External MOSFET  
LED Driver supporting  
Low Power LEDs using  
internal MOSFET  
Ordering Information  
Part Number  
Description  
PD24012L  
12 port LED driver with internal MosFETs  
for Low Power LEDs  
PD24012H  
12 port LED driver for High Power LEDs  
Analog Mixed Signal Group  
11861 Western Avenue  
Garden Grove, CA 92841  
USA  
Phone: (714) 372-8080  
www.microsemi.com  
Copyright ® Microsemi Corporation, 2007  
Microsemi is a trademark of Microsemi Corporation. All other trademarks are property of their respective owners. Information in this document is  
subject to change without notice. This document contains information that is proprietary to Microsemi. As such, it is confidential and its disclosure is  
strictly prohibited by applicable law. If you and/or your company and Microsemi executed a Non-Disclosure Agreement, then this document is being  
provided in connection with the Agreement, and the information contained herein is covered by the Agreement and under its terms may not be disclosed  
or used and must be protected by you and/or your company.  

相关型号:

PD2401X2

PD2401 AC Solid State Relays
IXYS

PD2401_10

AC Solid State Relays
CLARE

PD2425J5050S2

Splitter, 2 X 1.25 MM, SURFACE MOUNT PACKAGE-6
ANAREN

PD2425N5050S2

Ultra Low Profile 0404 Power Divider
ANAREN

PD2435

4-Character 5 x 7 Dot Matrix Alphanumeric Programmable Display⑩ with Built-in CMOS Control Functions
OSRAM

PD2436

4-Character 5 x 7 Dot Matrix Alphanumeric Programmable Display⑩ with Built-in CMOS Control Functions
OSRAM

PD2437

4-Character 5 x 7 Dot Matrix Alphanumeric Programmable Display⑩ with Built-in CMOS Control Functions
OSRAM

PD243X

Alphanumeric Programmable Display
OSRAM

PD243X_01

Lead (Pb) Free Product - RoHS Compliant
OSRAM

PD245

Analog IC
ETC