SMBJ18AE3/TR13 [MICROSEMI]
Trans Voltage Suppressor Diode, 600W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN;![SMBJ18AE3/TR13](http://pdffile.icpdf.com/pdf2/p00296/img/icpdf/SMBJ78E3-TR7_1791534_icpdf.jpg)
型号: | SMBJ18AE3/TR13 |
厂家: | ![]() |
描述: | Trans Voltage Suppressor Diode, 600W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN 局域网 光电二极管 |
文件: | 总4页 (文件大小:176K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMBJ5.0 thru SMBJ170A, CA, e3
and SMBG5.0 thru SMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W
Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive
components from destruction or degradation. It is available in J-bend design
(SMBJ) with the DO-214AA package for greater PC board mounting density or
in a Gull-wing design (SMBG) in the DO-215AA for visible solder connections.
It is also available in both unidirectional and bidirectional configurations with a
C or CA suffix part number as well as RoHS Compliant with an e3 suffix. Their
response time is virtually instantaneous. As a result, they can be used for
protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for
inductive switching environments and induced RF protection. They can also
protect from secondary lightning effects per IEC61000-4-5 and class levels
defined herein. Microsemi also offers numerous other TVS products to meet
NOTE: All SMB series are
equivalent to prior SMS package
identifications.
higher and lower power demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
• Available in both unidirectional and bidirectional
•
•
Economical surface mount design in both J-bend or
Gull-wing terminations
construction (add C or CA suffix for bidirectional)
• Selections for 5.0 to 170 volts standoff voltages (VWM
)
Protects sensitive components such as IC’s, CMOS,
Bipolar, BiCMOS, ECL, DTL, T2L, etc.
• Optional 100% screening for avionics grade is available
by adding MA prefix to part number for 100% temperature
cycle -55oC to +125oC (10X) as well as surge (3X) and 24
hours HTRB with post test VZ & IR (in operating direction
for unidirectional or both directions for bidirectional)
•
•
Protection from switching transients & induced RF
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
•
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
• Options for screening in accordance with MIL-PRF-19500
for JANTX are available by adding MX prefix to the part
number.
Class 1: SMB 5.0 to SMB 120A or CA
Class 2: SMB 5.0 to SMB 60A or CA
Class 3: SMB 5.0 to SMB 30A or CA
Class 4: SMB 5.0 to SMB 15A or CA
• Axial-lead equivalent packages for thru-hole mounting
available as P6KE6.8 to P6KE200CA (consult factory for
other surface mount options)
•
•
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
• Moisture classification is Level 1 with no dry pack required
per IPC/JEDEC J-STD-020B
Class 1: SMB 5.0 to SMB 36A or CA
Class 2: SMB 5.0 to SMB 18A or CA
• RoHS compliant devices available by adding an “e3” suffix
•
MAXIMUM RATINGS
• Peak Pulse Power dissipation at 25ºC: 600 watts at
10/1000 μs (also see Fig 1,2, and 3).
MECHANICAL AND PACKAGING
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• Impulse repetition rate (duty factor): 0.01%
•
TERMINALS: Gull-wing or C-bend (modified J-bend)
tin-lead or RoHS compliant annealed matte-tin plating
solderable per MIL-STD-750, method 2026
• tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
• Operating and Storage temperature: -65ºC to +150ºC
•
•
•
POLARITY: Cathode indicated by band. No marking
on bi-directional devices
• Thermal resistance: 25 ºC/W junction to lead, or 90ºC/W
junction to ambient when mounted on FR4 PC board (1oz
Cu) with recommended footprint (see last page)
MARKING: Part number without standard prefix (e.g.
5.0, 5.0A, 5.0CA, 5.0Ae3, 36, MX36A, 36CAe3, etc.)
• Steady-State Power dissipation: 5 watts at TL = 25oC, or
1.38 watts at TA = 25ºC when mounted on FR4 PC board
with recommended footprint
TAPE & REEL option: Standard per EIA-481-1-A with
12 mm tape, 750 per 7 inch reel or 2500 per 13 inch
reel (add “TR” suffix to part number)
•
•
WEIGHT: 0.1 grams
• Forward Surge at 25ºC: 100 Amps peak impulse of 8.3
See package dimension on last page
ms half-sine wave (unidirectional only)
• Solder temperatures: 260 ºC for 10 s (maximum)
Copyright © 2009
SA3-37, REV J, 5-24-2009
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBJ5.0 thru SMBJ170A, CA, e3
and SMBG5.0 thru SMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS @ 25oC
BREAKDOWN
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
REVERSE
STAND-OFF
VOLTAGE
VWM
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
PEAK PULSE
CURRENT
(See Fig. 2)
IPP
VOLTAGE
V(BR) @ I(BR)
Volts
MICROSEMI PART
NUMBER
GULL-WING MODIFIED “J”
I(BR)
mA
10
10
10
10
10
10
10
10
1
LEAD
BEND LEAD
Volts
5.0
5.0
6.0
6.0
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
20
20
22
22
24
24
26
26
28
28
30
30
33
33
36
36
40
40
43
43
45
45
Volts
9.6
9.2
Amps
62.5
65.2
52.6
58.3
48.7
53.6
45.1
50.0
42.0
46.5
40.0
44.1
37.7
41.7
35.5
39.0
31.9
35.3
29.9
33.0
27.3
30.2
25.2
27.9
23.3
25.8
22.3
24.0
20.8
23.1
19.7
21.7
18.6
20.5
16.7
18.5
15.2
16.9
14.0
15.4
12.4
14.2
12.0
13.2
11.2
12.4
10.2
11.3
9.3
μA
800
800
800
800
500
500
200
200
100
100
50
50
10
10
5
5
5
5
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MIN. MAX.
SMBG5.0
SMBG5.0A
SMBG6.0
SMBG6.0A
SMBG6.5
SMBG6.5A
SMBG7.0
SMBG7.0A
SMBG7.5
SMBG7.5A
SMBG8.0
SMBG8.0A
SMBG8.5
SMBG8.5A
SMBG9.0
SMBG9.0A
SMBG10
SMBJ5.0
SMBJ5.0A
SMBJ6.0
SMBJ6.0A
SMBJ6.5
SMBJ6.5A
SMBJ7.0
SMBJ7.0A
SMBJ7.5
SMBJ7.5A
SMBJ8.0
SMBJ8.0A
SMBJ8.5
SMBJ8.5A
SMBJ9.0
SMBJ9.0A
SMBJ10
6.40 – 7.30
6.40 – 7.00
6.67 – 8.15
6.67 – 7.37
7.22 – 8.82
7.22 – 7.98
7.78 – 9.51
7.78 – 8.60
8.33 – 10.2
8.33 – 9.21
8.89 – 10.9
8.89 – 9.83
9.44 – 11.5
9.44 – 10.4
10.0 – 12.2
10.0 – 11.1
11.1 – 13.6
11.1 – 12.3
12.2 – 14.9
12.2 – 13.5
13.3 – 16.3
13.3 – 14.7
14.4 – 17.6
14.4 – 15.9
15.6 – 19.1
15.6 – 17.2
16.7 – 20.4
16.7 – 18.5
17.8 – 21.8
17.8 – 19.7
18.9 – 23.1
18.9 – 20.9
20.0 – 24.4
20.0 – 22.1
22.2 – 27.1
22.2 – 24.5
24.4 – 29.8
24.4 – 26.9
26.7 – 32.6
26.7 – 29.5
28.9 – 35.3
28.9 – 31.9
31.1 – 38.0
31.1 – 34.4
33.3 – 40.7
33.3 – 36.8
36.7 – 44.9
36.7 – 40.6
40.0 – 48.9
40.0 – 44.2
44.4 – 54.3
44.4 – 49.1
47.8 – 58.4
47.8 – 52.8
50.0 – 61.1
50.0 – 55.3
11.4
10.3
12.3
11.2
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
35.8
32.4
39.4
35.5
43.0
38.9
46.6
42.1
50.0
45.4
53.5
48.4
59.0
53.3
64.3
58.1
71.4
64.5
76.7
69.4
80.3
72.7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SMBG10A
SMBG11
SMBJ10A
SMBJ11
SMBG11A
SMBJ11A
SMBG12
SMBJ12
SMBG12A
SMBG13
SMBJ12A
SMBJ13
SMBG13A
SMBJ13A
SMBG14
SMBJ14
SMBG14A
SMBG15
SMBJ14A
SMBJ15
SMBG15A
SMBJ15A
SMBG16
SMBJ16
SMBG16A
SMBG17
SMBJ16A
SMBJ17
SMBG17A
SMBJ17A
SMBG18
SMBJ18
SMBG18A
SMBG20
SMBJ18A
SMBJ20
SMBG20A
SMBJ20A
SMBG22
SMBJ22
SMBG22A
SMBG24
SMBJ22A
SMBJ24
SMBG24A
SMBJ24A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SMBG26
SMBJ26
SMBG26A
SMBG28
SMBJ26A
SMBJ28
SMBG28A
SMBJ28A
SMBG30
SMBJ30
SMBG30A
SMBG33
SMBJ30A
SMBJ33
SMBG33A
SMBJ33A
SMBG36
SMBJ36
SMBG36A
SMBG40
SMBJ36A
SMBJ40
10.3
8.4
9.3
7.8
8.6
SMBG40A
SMBJ40A
SMBG43
SMBJ43
SMBG43A
SMBG45
SMBJ43A
SMBJ45
7.5
8.3
SMBG45A
SMBJ45A
1
Copyright © 2009
SA3-37, REV J, 5-24-2009
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBJ5.0 thru SMBJ170A, CA, e3
and SMBG5.0 thru SMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
BREAKDOWN
VOLTAGE
V(BR) @ I(BR)
Volts
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
μA
1
1
1
REVERSE
STAND-OFF
VOLTAGE
VWM
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
PEAK PULSE
CURRENT
(See Fig. 2)
IPP
MICROSEMI PART
NUMBER
GULL-WING MODIFIED “J”
I(BR)
LEAD
BEND LEAD
Volts
48
48
51
51
54
54
58
58
60
60
64
64
70
70
75
75
78
78
85
85
90
90
100
100
110
110
120
120
130
130
150
150
160
160
170
170
Volts
85.5
77.4
91.1
82.4
96.3
87.1
103
93.6
107
96.8
114
103
125
113
134
121
139
126
151
137
160
146
179
162
196
177
214
193
231
209
268
243
287
259
304
275
Amps
7.0
7.7
6.6
7.3
6.2
6.9
5.8
6.4
5.6
6.2
5.3
5.8
4.8
5.3
4.5
4.9
4.3
4.7
3.9
4.4
3.8
4.1
3.4
3.7
3.0
3.4
2.8
3.1
2.6
2.9
2.2
2.5
2.1
2.3
2.0
2.2
MIN. MAX.
53.3 – 65.1
53.3 – 58.9
56.7 – 69.3
56.7 – 62.7
60.0 – 73.3
60.0 – 66.3
64.4 – 78.7
64.4 – 71.2
66.7 – 81.5
66.7 – 73.7
71.1 – 86.9
71.1 – 78.6
77.8 – 95.1
77.8 – 86.0
83.3 – 102
83.3 – 92.1
86.7 – 106
86.7 – 95.8
94.4 – 115
94.4 – 104
100 – 122
100 – 111
111 – 136
111 – 123
122 – 149
122 – 135
133 – 163
133 – 147
144 – 176
144 – 159
167 – 204
167 – 185
178 – 218
178 – 197
189 – 231
189 – 209
mA
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SMBG48
SMBJ48
SMBG48A
SMBG51
SMBJ48A
SMBJ51
SMBG51A
SMBJ51A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SMBG54
SMBJ54
SMBG54A
SMBG58
SMBJ54A
SMBJ58
SMBG58A
SMBJ58A
SMBG60
SMBJ60
SMBG60A
SMBG64
SMBJ60A
SMBJ64
SMBG64A
SMBJ64A
SMBG70
SMBJ70
SMBG70A
SMBG75
SMBJ70A
SMBJ75
SMBG75A
SMBJ75A
SMBG78
SMBJ78
SMBG78A
SMBG85
SMBJ78A
SMBJ85
SMBG85A
SMBJ85A
SMBG90
SMBJ90
SMBG90A
SMBG100
SMBG100A
SMBG110
SMBG110A
SMBG120
SMBG120A
SMBG130
SMBG130A
SMBG150
SMBG150A
SMBG160
SMBG160A
SMBG170
SMBG170A
SMBJ90A
SMBJ100
SMBJ100A
SMBJ110
SMBJ110A
SMBJ120
SMBJ120A
SMBJ130
SMBJ130A
SMBJ150
SMBJ150A
SMBJ160
SMBJ160A
SMBJ170
SMBJ170A
1
•
For Bidirectional device types indicate a C or CA suffix after the part number. (i.e.: SMBG170CA or
SMBJ170C). Bidirectional capacitance is half that shown in figure 4 at zero volts.
•
Microsemi Corp’s SMB series (600 W) surface mountable packages are designed specifically for transient
voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low
resistance path for surge current flow to ground. These high speed transient voltage suppressors can be
used to effectively protect sensitive components such as integrated circuits and MOS devices.
SYMBOLS & DEFINITIONS
Symbol
VWM
PPP
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Symbol
Definition
Peak Pulse Current
IPP
VC
Clamping Voltage
V(BR)
ID
Breakdown Voltage
Standby Current
I(BR)
Breakdown Current for V(BR)
Copyright © 2009
SA3-37, REV J, 5-24-2009
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBJ5.0 thru SMBJ170A, CA, e3
and SMBG5.0 thru SMBG170A, CA, e3
SURFACE MOUNT 600 Watt
Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
GRAPHS
50
30
TC = 25oC
10
5.0
3.0
2.0
1.0
0.5
0.3
0.2
0.1
0.1 0.2
0.5 1.0 2.0
5.0 10
20
50 100 200
1000
10,000
Test waveform parameters: tr=10 μs, tw=1000 μs
FIGURE 2
tw – Pulse Width - μs
FIGURE 1
Peak Pulse Power vs. Pulse Time
Pulse Waveform for
Exponential Surge
PAD LAYOUT
SMBJ
INCHES
.260
.085
mm
6.60
2.16
2.79
A
B
C
.110
SMBG
INCHES
0.320
0.085
mm
8.13
2.16
2.79
TL Lead Temperature oC
V(BR) - Breakdown Voltage – Volts
FIGURE 4
Typical Capacitance vs Breakdown Voltage
A
B
C
FIGURE 3 - Derating Curve
0.110
PACKAGE DIMENSIONS
A
B
C
D
E
F
K
L
MIN
MAX
.077 .160
.083 .180
.130 .205
.155 .220
.077
.104
.235
.255
.015
.030
.030
.060
DIMENSIONS IN MILLIMETERS
MIN
MAX
1.96 4.06
2.10 4.57
3.30 5.21
3.94 5.59
1.95
2.65
5.97
6.48
.381
.762
.760
1.520
Copyright © 2009
SA3-37, REV J, 5-24-2009
Microsemi
Page 4
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00296/img/page/SMBJ78E3-TR7_1791534_files/SMBJ78E3-TR7_1791534_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00296/img/page/SMBJ78E3-TR7_1791534_files/SMBJ78E3-TR7_1791534_2.jpg)
SMBJ18AE3/TR7
Trans Voltage Suppressor Diode, 600W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN
MICROSEMI
![](http://pdffile.icpdf.com/pdf2/p00251/img/page/SMBJ9-0AE3-T_1518483_files/SMBJ9-0AE3-T_1518483_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00251/img/page/SMBJ9-0AE3-T_1518483_files/SMBJ9-0AE3-T_1518483_2.jpg)
SMBJ18AE3TR
600W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
![](http://pdffile.icpdf.com/pdf2/p00277/img/page/SMBJ14P_1658607_files/SMBJ14P_1658607_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00277/img/page/SMBJ14P_1658607_files/SMBJ14P_1658607_2.jpg)
SMBJ18AP
DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, SMBJ, 2 PIN, Transient Suppressor
MCC
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMBJ36T3_1578890_files/SMBJ36T3_1578890_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMBJ36T3_1578890_files/SMBJ36T3_1578890_2.jpg)
SMBJ18AT1
Trans Voltage Suppressor Diode, 600W, Unidirectional, 1 Element, Silicon, DO-214AA,
LITTELFUSE
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMBJ36T3_1578890_files/SMBJ36T3_1578890_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00262/img/page/SMBJ36T3_1578890_files/SMBJ36T3_1578890_2.jpg)
SMBJ18AT3
Trans Voltage Suppressor Diode, 600W, Unidirectional, 1 Element, Silicon, DO-214AA,
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明