SMBJ5341ATRE3 [MICROSEMI]
Zener Diode, 6.2V V(Z), 10%, 5W,;
| 型号： | SMBJ5341ATRE3 |
| 厂家： | 
Microsemi |
| 描述： | Zener Diode, 6.2V V(Z), 10%, 5W, 测试 二极管 |
| 文件： | 总3页 (文件大小：129K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SURFACE MOUNT 5.0 Watt ZENER DIODES
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The SMBJ5333-5388B or SMBG5333-5388B series of surface mount 5.0
watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts
with different tolerances as identified by suffix letter on the part number. It is
equivalent to the JEDEC registered 1N5333 thru 1N5388B with identical
electrical characteristics and testing as well as RoHS Compliant with an e3
suffix. It is available in J-bend design (SMBJ) with the DO-214AA package
for greater PC board mounting density or in Gull-wing design (SMBG) in the
DO-215AA for visible solder connections. These plastic encapsulated
Zeners have a moisture classification of Level 1 with no dry pack required
and are also available in military equivalent screening levels by adding a
prefix identifier as further described in the Features section. Microsemi also
offers numerous other Zener products to meet higher and lower power
applications.
NOTE: All SMB series are
equivalent to prior SMS package
identifications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
• Surface mount equivalent to 1N5333 to 1N5388B
• Ideal for high-density and low-profile mounting
• Zener voltage available 3.3V to 200V
• Regulates voltage over a broad operating
current and temperature range
• Wide selection from 3.3 to 200 V
• Nonsensitive to ESD
• Withstands high surge stresses
• Standard voltage tolerances are plus/minus 5% with
B suffix and 10 % with A suffix identification
• Tight tolerances available in plus or minus 2% or 1%
• Minimal changes of voltage versus current as
specified by voltage regulation (ΔVZ)
with C or D suffix respectively
• Options for screening in accordance with MIL-PRF-19500
for JAN, JANTX, and JANTXV are available by adding
MQ, MX, or MV prefixes respectively to part numbers.
• High specified maximum current (IZM) when
adequately heat sinking
• Moisture classification is Level 1 with no dry
• RoHS compliant devices available by adding an “e3” suffix
pack required per IPC/JEDEC J-STD-020B
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
• Power dissipation at 25ºC: 5.0 watts (also see
• CASE: Void-free transfer molded thermosetting
derating in Figure 1).
• Operating and Storage temperature: -65ºC to
epoxy body meeting UL94V-0
• TERMINALS: Gull-wing or C-bend (modified J-
bend) tin-lead or RoHS compliant annealed
matte-Tin plating solderable per MIL-STD-750,
method 2026
+150ºC
• Thermal Resistance: 25 ºC/W junction to lead, or
90ºC/W junction to ambient when mounted on FR4
PC board (1oz Cu) with recommended footprint (see
last page)
• Steady-State Power: 5 watts at TL < 25oC, or 1.38
watts at TA = 25ºC when mounted on FR4 PC board
with recommended footprint (also see Figure 1)
• POLARITY: Cathode indicated by band. Diode
to be operated with the banded end positive
with respect to the opposite end.
• MARKING: Part number without SMBx prefix
(e.g. 5333B, 5333Be3, MX5348C, 5376D, etc.)
• Forward voltage @1.0 A: 1.2 volts (maximum)
• Solder Temperatures: 260 ºC for 10 s (maximum)
• TAPE & REEL option: Standard per EIA-481-1-
A with 12 mm tape, 750 per 7 inch reel or 2500
per 13 inch reel (add “TR” suffix to part number)
• WEIGHT: 0.1 grams
• See package dimensions on last page
Copyright © 2007
6-21-2007 REV E
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SURFACE MOUNT 5.0 Watt ZENER DIODES
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS @ TL = 30oC
MAXIMUM
VOLTAGE
REGULATION
MAXIMUM
DYNAMIC
IMPEDANCE
IR TEST
VOLTAGE
MAXIMUM
REGULATOR DYNAMIC KNEE
CURRENT
MAXIMUM
MAXIMUM
REVERSE
CURRENT
IR TEST
VOLTAGE
MAXIMUM
SURGE
CURRENT
REGULATOR
VOLTAGE
TEST
CURRENT
TYPE NUMBER
IMPEDANCE
(VR)
(Non-Suffix &
A Suffix)
(VR)
(B,C,D Suffix)
(ΔVZ)
(A,B,C,D
Suffix)
(VZ)
(IZ)
(ZZ)
(A&B Suffix)
(IZM
)
ZZK AT 1.0Ma
(IR)
(IZSM)
GULL-
WING
LEAD
C-BEND
(B,C,D Suffix)
(A,B,C,D Suffix)
(MOD.
“J”)
V
mA dc
OHMS
V
V
mA
OHMS
AMPS
VOLTS
μA
SMBG5333B SMBJ5333B
SMBG5334B SMBJ5334B
SMBG5335B SMBJ5335B
SMBG5336B SMBJ5336B
SMBG5337B SMBJ5337B
SMBG5338B SMBJ5338B
SMBG5339B SMBJ5339B
SMBG5340B SMBJ5340B
SMBG5341B SMBJ5341B
SMBG5342B SMBJ5342B
SMBG5343B SMBJ5343B
SMBG5344B SMBJ5344B
SMBG5345B SMBJ5345B
SMBG5346B SMBJ5346B
SMBG5347B SMBJ5347B
SMBG5348B SMBJ5348B
SMBG5349B SMBJ5349B
SMBG5350B SMBJ5350B
SMBG5351B SMBJ5351B
SMBG5352B SMBJ5352B
SMBG5353B SMBJ5353B
SMBG5354B SMBJ5354B
SMBG5355B SMBJ5355B
SMBG5356B SMBJ5356B
SMBG5357B SMBJ5357B
SMBG5358B SMBJ5358B
SMBG5359B SMBJ5359B
SMBG5360B SMBJ5360B
SMBG5361B SMBJ5361B
SMBG5362B SMBJ5362B
SMBG5363B SMBJ5363B
SMBG5364B SMBJ5364B
SMBG5365B SMBJ5365B
SMBG5366B SMBJ5366B
SMBG5367B SMBJ5367B
SMBG5368B SMBJ5368B
SMBG5369B SMBJ5369B
SMBG5370B SMBJ5370B
SMBG5371B SMBJ5371B
SMBG5372B SMBJ5372B
SMBG5373B SMBJ5373B
SMBG5374B SMBJ5374B
SMBG5375B SMBJ5375B
SMBG5376B SMBJ5376B
SMBG5377B SMBJ5377B
SMBG5378B SMBJ5378B
SMBG5379B SMBJ5379B
SMBG5380B SMBJ5380B
SMBG5381B SMBJ5381B
SMBG5382B SMBJ5382B
SMBG5383B SMBJ5383B
SMBG5384B SMBJ5384B
SMBG5385B SMBJ5385B
SMBG5386B SMBJ5386B
SMBG5387B SMBJ5387B
SMBG5388B SMBJ5388B
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.0
6.2
6.8
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
25
27
28
30
33
36
39
43
47
51
56
60
62
68
75
82
87
91
100
110
120
130
140
150
160
170
180
190
200
380
350
320
290
260
240
220
200
200
175
175
150
150
150
125
125
100
100
100
75
75
70
65
65
65
50
50
50
50
50
40
40
30
30
30
25
3.0
2.5
2.0
2.0
2.0
1.5
1.0
1.0
1.0
1.0
1.5
1.5
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.5
3.5
4.0
5.0
6.0
8.0
10
11
14
20
25
27
35
40
42
44
45
65
75
75
90
300
150
50
1.0
1.0
1.0
1.0
1.0
1.0
2.0
3.0
3.0
4.9
5.4
5.9
6.25
6.6
7.2
8.0
8.6
9.4
10.1
10.8
11.5
12.2
13
13.7
14.4
15.8
17.3
18
19.4
20.1
21.6
23.8
25.9
28.1
31
33.8
36.7
40.3
43
44.6
49
54
59
63
65.5
72
79.2
86.4
93.6
101
108
115
122
130
137
144
1.0
1.0
1.0
1.0
1.0
1.0
2.0
3.0
3.0
5.2
5.7
6.2
6.6
6.9
7.6
8.4
9.1
1440
1320
1220
1100
1010
930
865
790
765
700
630
580
545
520
475
430
395
365
340
315
295
280
264
250
237
216
198
190
176
170
158
144
132
122
110
100
93
86
79
76
70
63
58
54.5
52.5
47.5
43
39.5
36.6
34
31.6
29.4
28
26.4
25
400
500
500
500
450
400
400
300
200
200
200
200
200
150
125
125
125
100
75
20
18.7
17.6
16.4
15.3
14.4
13.4
12.7
12.4
11.5
10.7
10
0.85
0.80
0.54
0.49
0.44
0.39
0.25
0.19
0.10
0.15
0.15
0.20
0.20
0.22
0.22
0.25
0.25
0.25
0.25
0.25
0.30
0.35
0.40
0.40
0.40
0.45
0.55
0.55
0.60
0.60
0.60
0.60
0.65
0.65
0.70
0.80
0.90
1.00
1.20
1.35
1.50
1.60
1.80
2.00
2.20
2.30
2.50
2.50
2.50
2.50
3.00
3.00
3.00
4.00
5.00
5.00
10
5.0
1.0
1.0
1.0
1.0
10
10
10
10
9.5
9.2
8.6
8.0
7.5
7.0
6.7
6.3
6.0
5.8
5.5
5.3
5.1
4.7
4.4
4.3
4.1
3.9
3.7
3.5
3.3
3.1
2.8
2.7
2.5
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.2
1.1
1.1
1.0
1.0
0.9
0.9
7.5
5.0
5.0
2.0
1.0
1.0
1.0
1.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
9.9
10.6
11.5
12.2
12.9
13.7
14.4
15.2
16.7
18.2
19
20.6
21.2
22.8
25.1
27.4
29.7
32.7
35.8
38.8
42.6
45.5
47.1
51.7
56
75
75
75
75
75
75
75
100
110
120
130
140
150
160
170
190
210
230
280
350
400
500
620
720
760
760
800
1000
1150
1250
1500
1500
1650
1750
1750
1850
1850
25
20
20
20
20
20
15
15
15
12
12
10
62.2
66
69.2
76
125
170
190
230
330
350
380
430
450
480
83.6
91.2
98.8
106
114
122
129
137
144
152
10
8.0
8.0
8.0
8.0
5.0
5.0
5.0
23.6
NOTE 1: Devices listed above with B suffix have ±5% tolerance, A suffix designates ±10% tolerance, C suffix designates ±2%
tolerance, and D designates ±1% tolerance.
NOTE 2: Zener voltage (Vz) is measured at TL = 25oC (+8, -2oC). Voltage measurement to be performed 40 ±10 milliseconds
after application of dc current.
NOTE 3: The zener impedance is derived from 1 kHz ac voltage resulting from an ac current modulation having an rms value
equal to 10% of the dc zener current (IZT or IZK) superimposed on IZT or IZK. See Micro Note 202 for zener impedance
variation with different operating currents.
NOTE 4: The maximum current (IZM) shown is for a ±5% tolerance devices. The IZM for other tolerances can be calculated using
the formula: IZM = P/VZM where VZM is the VZ at the high end of the voltage tolerance specified and P is the rated power
for the method of mounting.
NOTE 5: The surge current (IZSM) is specified as the maximum peak of a non-recurrent half-sine wave of 8.3 ms duration.
NOTE 6: Voltage regulation (VZ) is the difference between the voltage measured at 10% and 50% of IZM
.
Copyright © 2007
6-21-2007 REV E
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SURFACE MOUNT 5.0 Watt ZENER DIODES
S C O T T S D A L E D I V I S I O N
GRAPHS
SMB5335
SMB5338
SMB5342
SMB5344
TL
TA on FR4
PC board
Temperature (oC)
FIGURE 1 – Power Derating Curve
FIGURE 2 – Capacitance vs. Zener Voltage
PACKAGE DIMENSIONS & PAD LAYOUT
SMB5350
SMBJ
SMBG
SMB5357
A
.077
B
.160
C
.130
D
.205
E
.077
F
.235
K
.015
L
.030
SMB5365
SMB5378
MIN
MAX
.083
.180
.155
.220
.104
.255
.030
.060
DIMENSIONS IN MILLIMETERS
1.96
2.10
4.06
3.30
5.21
1.95
5.97
.381
.762
.760
MIN
MAX
4.57
3.94
5.59
2.65
6.48
1.520
SMB5388
INCHES
0.320
0.085
0.110
INCHES
.260
mm
8.13
2.16
2.79
mm
6.60
2.16
2.79
SMBG
A
B
C
SMBJ
A
B
C
.085
.110
FIGURE 3
Typical Capacitance vs.
Reverse Voltage for 5 Watt Zeners
Copyright © 2007
6-21-2007 REV E
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号：
SMBJ5341B
5 Watt Surface Mount Silicon Zener DiodesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
SMBJ5341B
SURFACE MOUNT SILICON ZENER DIODESWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EIC
SMBJ5341B
5 Watt Surface Mount Silicon Zener DiodesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MCC
SMBJ5341B
5W SURFACE MOUNT SILICON ZENER DIODEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
DIOTECH
SMBJ5341B
SURFACE MOUNT SILICON ZENER DIODESWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SYNSEMI
SMBJ5341B
5W axial zener diode SMB 6.2V seriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNMATE
SMBJ5341B-T
Zener Diode,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MCC
SMBJ5341B-TP
5 Watt Surface Mount Silicon Zener Diode 5.1 to 200 VoltsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MCC
SMBJ5341B-TP-HF
Zener Diode, 6.2V V(Z), 5%, 5W, Silicon, Unidirectional, DO-214AA, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMB, 2 PINWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MCC
SMBJ5341B-TPX01
Zener Diode,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MCC
©2020 ICPDF网 联系我们和版权申明