SMDA05C-8 [MICROSEMI]
TVSarray Series; TVSarray系列
| 型号： | SMDA05C-8 |
| 厂家： | 
Microsemi |
| 描述： | TVSarray Series |
| 文件： | 总2页 (文件大小：230K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
SMDA03C-8
thru
SMDA24C-8
TVSarrayÔ Series
DESCRIPTION (300 watt)
This 14 pin 8 line Bi-directional array is designed for use in
applications where protection is required at the board level from
voltage transients caused by electrostatic discharge (ESD) as defined
in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and
effects of secondary lighting.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays
have a peak power of 300 watts for an 8/20 msec pulse and are designed to protect 3.0/3.3 volt
components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts.
FEATURES
MECHANICAL
·
·
·
·
Protects 3.0/3.3 up through 24V Components
·
·
·
·
·
Molded SO-14 Surface Mount
Protects 8 lines Bi-directional
Provides electrically isolated protection
SO-14 Packaging
Weight: 0.127 grams (approximate)
Body Marked with Logo, and device number
Pin #1 defined by DOT on top of package
Encapsulation meets UL 94V-0
MAXIMUM RATINGS
PACKAGING
·
·
·
·
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 300 Watts (8/20 msec, Figure 1)
Pulse Repetition Rate: <.01%
·
·
·
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500 (OPTIONAL)
Carrier tubes 55 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS@ 250C Unless otherwise specified
STAND
BREAKDOWN
VOLTAGE
VBR
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
ID
CAPACITANCE
OFF
VOLTAG
E
TEMPERATURE
COEFFICIENT
OF VBR
(f=1 MHz)
@0V
C
PART
NUMBER
DEVICE
MARKING
@1 mA
@ VWM
VWM
áVBR
mV/°C
VOLTS
µA
pF
VOLTS
MAX
MIN
4
MAX
7.0
MAX
9.0
11
MAX
200
40
1
TYP
300
200
75
MAX
-5
SMDA03C-8
SMDA05C-8
SMDA12C-8
SMDA15C-8
SMDA24C-8
SDL8
SDB8
SDD8
SDF8
SDH8
3.3
5.0
6.0
9.8
1
12.0
15.0
24.0
13.3
16.7
26.7
19.0
24.0
43.0
24
8
30
1
50
11
28
55
1
35
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage
VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of
the circuit to be protected.
Application: The SMDAXXC-8 product is designed for transient voltage suppression protection of
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0976.PDF
ISO 9001 CERTIFIED
REV F 7/06/2000
SMDA03C-8 thru SMDA24C-8
WAVE FORMS
100
Peak Value -- Ipp
8 X 20 Waveform
50
Ipp
2
Half-Value --
0
0
20
30
10
t
t
d
t -- Time in microsec
FIGURE 1
FIGURE 2
Peak Pulse Power Vs Pulse Time
Pulse Wave Form
MOUNTING PAD SO-14
CIRCUIT DIAGRAM
SO-14 PACKAGE
MSC0976.PDF
ISO 9001 CERTIFIED
REV F 7/06/2000
相关型号：
SMDA05C-8-TR3
Trans Voltage Suppressor Diode, 300W, 5V V(RWM), Bidirectional, 9 Element, Silicon, PLASTIC, SO-14
MICROSEMI
SMDA05C-8.TE
Trans Voltage Suppressor Diode, 300W, 5V V(RWM), Bidirectional, 9 Element, Silicon, MS-012AB, PLASTIC, SO-14
SEMTECH
SMDA05C-LF
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
SMDA05C-LF-T13
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
SMDA05C-LF-T7
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
SMDA05C-T13
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 4 Element, Silicon, PLASTIC, SOP-8
PROTEC
©2020 ICPDF网 联系我们和版权申明