8579-1-57-15-21-14-10-0 [MILL-MAX]

PCB Terminal;


型号：	8579-1-57-15-21-14-10-0
厂家：	MILL-MAX MFG. CORP.
描述：	PCB Terminal PC 端子和端子排
文件：	总2页 (文件大小：145K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Product Number: 8579-1-57-15-21-14-10-0

Description:

8579 - Receptacle With No Tail

Accepts .015-.022 diameter leads.

Packaging:

Packaged Vertically on Tape & Reel

1,200 per 13" reel

Mill-Max

Part

Shell Plating

Contact Plating

RoHS

Compliant

Number

8579-1-57-15-21-14-10-0

10 μ" Gold over Nickel

CONTACT:

Contact Used: #21, Low Force 3 Finger Contact

Current Rating = 3 Amps

BERYLLIUM COPPER ALLOY 172 (UNS C17200) per

ASTM B 194

Properties of BERYLLIUM COPPER:

Chemical composition: Cu 98.1%, Be 1.9%

Temper as stamped: TD01

Properties after heat treatment (TH01):

Hardness: 36-43 Rockwell C

Mechanical Life: 100 Cycles Min.

Density: .298 lbs/in3

Electrical Conductivity: 22% IACS*

Resistance: 10 miliohms Max

Operating Temperature: -55°C/+125°C

Melting point: 980°C/865°C (liquidus/solidus)

Stress Relaxation†: 96% of stress remains after

1,000 hours @ 100 °C ; 70% of stress remains after

1,000 hours @ 200 °C

*International Annealed Copper Standard, i.e. as a % of pure copper.

†Since BeCu loses its spring properties over time at high temperatures; it is rated for continuous use up to 150°C. For

applications up to 300°C, Mill-Max offers many contacts in Beryllium Nickel. Contact Tech Support for more info.

Mill-Max Mfg. Corp. Datasheet — Last Modified 2/17/2013

Page 1 of 2

SHELL MATERIAL:

BRASS ALLOY (UNS C36000) per ASTM B 16

Note: Swage Pins are Annealed

Properties of BRASS ALLOY:

Chemical composition: Cu 61.5%, Zn 35.4%, Pb 3.1%†

Hardness as machined: 80-90 Rockwell B

Density: .307 lbs/in3

Electrical conductivity: 26% IACS*

Melting point: 900°C/885°C (liquidus/solidus)

†(3 to 4% lead is used to permit "free machining" and is permitted by EC Directive 2002/95Annex 6; so all pin materials

are RoHS compliant)

*International Annealed Copper Standard, i.e. as a % of pure copper.

Certificate of Compliance:

This is to Certify that the product described above is manufactured to Mill-Max quality standards in accordance with all

applicable specifications and drawing. Mill-Max certifies this product to be free from defects of materials and workmanship.

This Certificate of Compliance covers the following requirements:

Dimensional (all features verified to be within tolerances described on the applicable drawing).

Raw Material (materials and properties verified to be as described on the applicable drawing).

Plating (platings as required, thickness verified, and performance including solderability per mil-standard).

Performance (insertion extraction or other force requirements as described on the applicable drawing).

Compliance Statement for RoHS and RoHS-2, on the restriction of the use of certain hazardous substances in

electrical and electronic equipment, for Mill-Max products.

Reference:

1. Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain

hazardous substances in electrical and electronic equipment (recast)

2. Directive 2002/95/EC of the European Parliament and of the Council of January 27 2003 on the restriction of the use of

certain hazardous substances in electrical and electronic equipment. In reference to the directives described above, Mill-Max

Mfg.Corp. certifies that its product labeled as RoHS and RoHS-2 are compliant to both Directives with exemption 6c, (copper

alloy containing up to 4 % lead by weight) applied. No warranty, liability of indemnification is expressed or implied with this

information.

Compliance Statement for Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)

Reference:

1. Regulation EC No 1907/2006 of the European Parliament and of the Council of 18 December 2006, concerning the

Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)

2. ECHA, Candidate list of Substances of Very High Concern (SVHC) http://echa.europa.eu/reach_en.asp

Mill-Max is aware of the regulation and the SVHC list the EU published (referenced above). Mill-Max does not produce or sell

any of the listed substances in their homogeneous form. These substances are not intentionally added during the

manufacturing of any Mill-Max products. To our knowledge, our products do not contain the substances described on the ECHA

SVHC list. Testing is not performed for materials and substances that were not intentionally added. No warranty, liability of

indemnification is expressed or implied with this information. Mill-Max maintains surveillance of the ECHA website to obtain the

latest information and periodically reviews the SVHC list for changes and additions.

Compliance Statement for DRC Conflict Free products.

Reference:

Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502, reporting requirements for users of conflict

minerals.

“Conflict minerals,” are Columbite-tantalite (coltan), cassiterite, gold, wolframite, or their derivatives; or any other mineral or

its derivatives determined by the Secretary of State to be financing conflict in the Democratic Republic of the Congo (DRC) or

an adjoining country. Metals derived from these minerals are tin, tantalum, tungsten, and gold. By this definition, the only

minerals of concern that may be found in Mill-Max products are tin and gold.

Mill-Max Mfg.Corp. hereby certifies that its products are manufactured with tin and gold that is derived from material that is

considered DRC Conflict Free. Mill-Max provides this assurance as a result of a due diligence process that includes traceability

to the source and in some cases the identification of recycled and scrap materials included in the subject material.

Mill-Max Mfg. Corp. Datasheet — Last Modified 2/17/2013

Page 2 of 2

8579-1-57-15-21-14-10-0 [MILL-MAX]

相关型号：

8579-1-57-80-11-14-10-0

8579-1-57-80-21-14-10-0

85791-0020

85791-1020

85791-2020

85791-3020

85793-1001

85793-1003

85793-1006

85793-1007

85793-101

85793-1012