9222-0-57-01-02-01-40-0 [MILL-MAX]
PCB Terminal;型号: | 9222-0-57-01-02-01-40-0 |
厂家: | MILL-MAX MFG. CORP. |
描述: | PCB Terminal PC |
文件: | 总2页 (文件大小:227K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
solutions
MAXIMUM
Receptacles on Tape for Automated Assembly
Mill-Max offers receptacles (discrete sockets) on carrier tape per EIA-481 to feed automated ‘pick &
place’ assembly equipment. Our standard reel size is13”.
• Two types of receptacles are available on carrier tape: surface mount, flat types, which sit on the
surface of the PCB where the pin or component lead plugs-in parallel to the PCB; and thru-hole types
where the lead plugs-in perpendicular to the PCB. Thru-hole receptacles are intrusive reflow soldered*.
Our increasingly popular thru-hole (tubular) receptacles have an Organic Fibre Plug® barrier which
prevents solder, paste or flux from contaminating the spring contact. After soldering, the OFP®
barrier is pushed out of the receptacle when the device is plugged in.
• Also new for Mill-Max is the availability of RoHS compliant plating options. Instead of traditional
tin/lead plating on the receptacle’s shell and contact, a pure matte tin with oxide and whisker inhibitors
can be specified.
*Intrusive reflow (also called "pin-in-paste") is a technique of using conventional thru-hole components in a reflow soldering
process. The receptacles are placed into plated-thru-holes in the circuit board (solder paste has previously been screen printed
on pads adjacent to the holes) and the board is reflowed in the same pass as other SMT components. Solder will fill the plated-
thru-holes and achieve solder joints as reliable as wave soldering. The OFP® barrier prevents solder paste from being picked-
up inside the contact during pick ‘n place assembly. "Overprinting" paste on the solder mask can be used to adjust the volume
of paste required to fill each hole.
(10/07-558)
R
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, Oyster Bay, NY 11771-0300
516-922-6000 • Fax: 516-922-9253 • www.mill-max.com
Maximum Interconnect Solutions
RECEPTACLES ON TAPE per EIA-481
for automated “pick & place” assembly.
PINS
Surface Mount & OFP® thru hole, “intrusive” reflow soldered
3907
8806
6628
.080
.059
.080
.059
.078
.057
3907-0-5X-XX-30-XX-10-0 8806-0-5X-XX-47-XX-40-0 6628-0-5X-XX-18-XX-10-0
Surface Mount.
Surface Mount.
#47 Contact for Ø.025-.037 pins.
Supplied on 12mm wide carrier tape,
4,000 per 13” reel.
Surface Mount.
#18 Contact for Ø.037-.043 pins.
Supplied on 12mm wide carrier tape,
3,700 per 13” reel.
#30 Contact for Ø.015-.025 pins.
Supplied on 12mm wide carrier tape,
4,000 per 13” reel,.
9184
9222
0577
ꢀꢁꢂꢃ $)!ꢀ
ꢀꢁꢂꢃ $)!ꢀ
ꢀꢅꢂꢈ $)!ꢀ
ꢀꢅꢊꢅ $)!ꢀ
ꢀꢅꢉꢂ
ꢀꢅꢅꢆ
ꢁꢉMM
ꢀꢅꢂꢂ
ꢀꢁꢄꢅ $)!ꢀ
ꢀꢁꢅꢅ
ꢀꢁꢉꢅ $)!ꢀ
ꢀꢅꢈꢃ
ꢀꢁꢆꢅ
ꢀꢁꢃꢅ
ꢀꢅꢈꢄ
ꢀꢉꢅꢅ
ꢀꢁꢇꢄ
ꢀꢅꢈꢄ
ꢀꢁꢅꢅ
ꢈMM
ꢀꢁꢉꢂ
ꢀꢅꢆꢅ $)!ꢀ
ꢀꢅꢈꢅ $)!ꢀ
ꢀꢅꢇꢅ
ꢀꢅꢄꢁ $)!ꢀ
9184-0-5X-XX-02-XX-40-0 9222-2-5X-XX-02-XX-40-0
0577-0-6X-XX-21-XX-10-0
OFP® thru hole, “intrusive” reflow
soldered in Ø.045 .003 ꢀPT.
#21 Contact for Ø.015-.022 pins.
Supplied on 12mm wide carrier tape,
3,000 per 13” reel.
Bottom entry, “intrusive” reflow
soldered in Ø.095 .003 ꢀPT.
#02 Contact for Ø.040-.050 pins.
Supplied on 12mm wide carrier tape,
1,500 per 13” reel.
Bottom entry, “intrusive” reflow
soldered in Ø.085 .003 ꢀPT.
#02 Contact for Ø.040-.050 pins.
Supplied on 12mm wide carrier tape,
1,500 per 13” reel.
Carrier tape format for
9184 & 9222
4015
4280
9873
5364
.120 DIA.
.078 DIA.
.020
.100 DIA.
.030
.068 DIA.
.020
.110
.062 DIA.
.093
.018
.125
.150
.098 DIA.
.089
.052 DIA.
.089
.125
.078 DIA.
.100
.100
.075 DIA.
.067 DIA.
.056 DIA.
.068 DIA.
.009
.009
.051 DIA.
.009
.043 DIA.
.009
4015-0-6X-XX-30-XX-10-0 4280-0-6X-XX-16-XX-10-0 9873-0-6X-XX-02-XX-10-0 5364-0-6X-XX-23-XX-10-0
OFP® thru hole, “intrusive” reflow
soldered in Ø.057 .003 ꢀPT.
#30 Contact for Ø.015-.025 pins.
Supplied on 8mm wide carrier tape,
5,500 per 13” reel.
OFP® thru hole, “intrusive” reflow
soldered in Ø.067 .003 ꢀPT.
#16 Contact for Ø.022-.034 pins.
Supplied on 8mm wide carrier tape,
5,500 per 13” reel.
OFP® thru hole, “intrusive” reflow
soldered in Ø.083 .003 ꢀPT.
#02 Contact for Ø.040-.050 pins.
Supplied on 12mm wide carrier tape,
4,500 per 13” reel.
OFP® thru hole, “intrusive” reflow
soldered in Ø.103 .003 ꢀPT.
#23 Contact for Ø.045-.065 pins.
Supplied on 12mm wide carrier tape,
2,000 per 13” reel.
ORDER CODE: XXXX - X - XX - XX - XX - XX -XX - 0
BASIC PART #
REEL SIZE: 7 = 13”
SPECIFICATIONS
2O(3
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
ꢀꢁꢁꢀꢂꢃꢄꢂ%#
SPECIFY SHELL FINISH:
01 200μ" TIN/LEAD OVER NICKEL
80 200μ" TIN OVER NICKEL
SPECIFY CONTACT FINISH:
27 30μ" GOLD OVER NICKEL
01 200μ" TIN/LEAD or 02 100μ" TIN/LEAD OVER NICKEL
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
80 200μ" TIN
or
84 100μ" TIN OVER NICKEL
DIMENSION IN INCHES
TOLERANCES ON:
CONTACT TYPE
#21, #30, #16, #47, #18, #02, #03 or #23
Use with #21 & #30 Contacts Only
LENGTHS:
DIAMETERS: .002
ANGLES: 2ꢁ
.00ꢀ
(DATA ON PAGES 206-214)
The ORGANIC FIBRE PLUG® (OFP®) barrier prevents solder, paste or flux from contaminating the spring contact.
After soldering, the OFP® barrier is pushed out of the receptacle when the device is plugged in.
www.mill-max.com
ꢀ
516-922-6000
PR558
相关型号:
©2020 ICPDF网 联系我们和版权申明