LHA-23HLN+ [MINI]
Monolithic Amplifier;
| 型号： | LHA-23HLN+ |
| 厂家： | 
MINI-CIRCUITS |
| 描述： | Monolithic Amplifier |
| 文件： | 总5页 (文件大小：316K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ultra High Dynamic Range
Monolithic Amplifier
LHA-23HLN+
50Ω
30MHz to 2 GHz
The Big Deal
CASE STYLE: DQ1225
• Ultra-High IP3, +44.7 dBm typ.
• Medium power, +28.3 dBm typ.
• Excellent Noise Figure, 1.3 dB typ.
Product Overview
LHA-23HLN+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT
technology and offers extremely high dynamic range over a broad frequency range and with low noise
figure. In addition, the LHA-23HLN+ has good input and output return loss over a broad frequency
range. LHA-23HLN+ is enclosed in a 3mm x 3mm, 12-lead MCLP package and has very good thermal
performance.
Key Features
Feature
Advantages
Broad Band: 30MHz to 2GHz
Broadband covering primary wireless communications bands: VHF, UHF, Cellular
The LHA-23HLN+ matches industry leading IP3 performance relative to device size and power
consumption. The combination of the design and E-PHEMT Structure provides enhanced linear-
ity over a broad frequency range as evidence in the IP3 being approximately 11-17 dB above
the P1dB point. This feature makes this amplifier ideal for use in:
Extremely High IP3
43.8 dBm typical at 0.5 GHz
44.7 dBm typical at 1GHz
• Driver amplifiers for complex waveform up converter paths
• Drivers in linearized transmit systems
• Secondary amplifiers in ultra-High Dynamic range receivers
Low Noise Figure
1.3 dB at 1 GHz
Enables lower system noise figure performance and along with High OIP3 provides high dy-
namic range
High P1dB, High OIP3, Low NF results in a very dynamic range preventing amplifier saturation
under strong interfering signals.
High P1dB, 28.3 dBm at 1 GHz
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 5
Ultra High Dynamic Range
30MHz to 2 GHz
Monolithic Amplifier
Product Features
• High IP3, 44.7 dBm typ. at 1GHz
• Gain, 21.5 dB typ. at 1 GHz
• Low noise figure, 1.3 dB at 1 GHz
• High P1dB, 28.3 dBm at 1 GHz
LHA-23HLN+
CASE STYLE: DQ1225
+RoHS Compliant
ꢀhe ꢁꢂꢃꢄꢄiꢅ iꢆentiꢄieꢇ RꢈHꢂ ꢉꢈmꢊlianceꢋ ꢂee ꢈꢃr ꢌeꢍ ꢇite
ꢄꢈr RꢈHꢂ ꢉꢈmꢊliance methꢈꢆꢈlꢈgieꢇ anꢆ ꢎꢃaliꢄicatiꢈnꢇ
Typical Applications
• Base station infrastructure
• CATV
• Cellular
General Description
LHA-23HLN+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT
technology and offers extremely high dynamic range over a broad frequency range and with low noise
figure. In addition, the LHA-23HLN+ has good input and output return loss over a broad frequency
range. LHA-23HLN+ is enclosed in a 3mm x 3mm, 12-lead MCLP package and has very good thermal
performance.
simplified schematic and pad description
NC NC NC
RF-OUT
RF-IN
and DC-IN
NC
NC
NC
NC
RF-IN
RF-OUT & DC-IN
GND
NC NC NC
Function
RF IN
Pin Number
Description
3
7
RF Input
RF-OUT and DC-IN
GND
RF Output and DC Bias
Connections to ground.
Paddle
1-2, 4-6, 8-12
NC
No connection, grounded externally
REV. OR
M166210
LHA-23HLN+
MCL NY
180416
Page 2 of 5
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic E-PHEMT MMIC Amplifier
LHA-23HLN+
1
Electrical Specifications at 25°C, 50Ω, unless noted
1
Parameter
Condition
(GHz)
Units
Vd=8V
Typ.
Min.
Max.
Frequency Range
30
—
—
19.2
18.5
—
2000
—
—
23.5
22.6
—
MHz
dB
30
500
1000
1500
2000
30
23.2
22.1
21.5
20.9
20.2
12
Gain
500
11
Input Return Loss
1000
1500
2000
30
10
10
11
14
13
14
12
10
dB
dB
500
Output Return Loss
1000
1500
2000
Reverse isolation
1000
27.2
dB
30
500
1000
1500
2000
30
26.0
28.3
28.3
28.0
27.9
41.1
43.8
44.7
45.6
45.2
1.3
dBm
Output Power @1 dB compression
500
2
Output IP3
1000
1500
2000
30
dBm
dB
500
1.2
Noise Figure
1000
1.3
1500
2000
1.5
1.7
Device Operating Voltage
8
V
Device Operating Current
Device Current Variation vs. Temperature
Device Current Variation vs Voltage
244
-241
0.0286
273
mA
µA/°C
mA/mV
3
Thermal Resistance, junction-to-ground lead
Junction-to-ground lead at 85°C stage temperature
23.3
°C/W
1. Measured on Mini-Circuits Characterization test board TB-1061-23HLN+. See Characterization Test Circuit (Fig. 1)
2. Tested at Pout= 0 dBm / tone.
3. (Current at 95°C — Current at -45°C)/140
4
Absolute Maximum Ratings
Parameter
Ratings
Operating Temperature (ground lead)
Storage Temperature
Power Dissipation
-40°C to 95°C
-65°C to 150°C
3.3W
5
6
+22 dBm (5 minutes max)
+11 dBm (continuous) for 0.03-1GHz
+18 dBm (continuous) for 1-2 GHz
Input Power (CW)
DC Voltage on Pin 7
10V
4. Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
5. Up to 85°C, derate linearly to 3W at 95°C.
6. Up to 85°C, derate linearly to +19dBm at 95°C.
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 3 of 5
Monolithic E-PHEMT MMIC Amplifier
LHA-23HLN+
Characterization Test / Recommended Application Circuit
Component
C1
C2,C3,C6
C4
C5
R1
L1
L2
Size
Value
1.2pF
0.1uF
0.001uF
0.01uF
1.21KOhm
0.68uH
1nH
Manufacturer
Murata
P/N
GRM1555C1H1R2WA01D
GRM155R71C104KA88D
GRM1555C1H120JA01D
GRM155R71E103KA01D
RK73H1ETTP1211F
0805LS-681XJLB
0402
KOA
Coilcraft
0805
0402
0402CS-1N0XJLW
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-1061-23HLN+)
Gain, Return loss, Output power at 1dB compression (P1 dB), output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X micro-
wave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/ tone at output.
Product Marking
black body
index over pin 1
MCL
model family designation
23LN
Marking may contain other features or characters for internal lot control
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 4 of 5
Monolithic E-PHEMT MMIC Amplifier
LHA-23HLN+
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
Data Table
Performance Data
Case Style
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
DQ1225
Plastic package, exposed paddle lead finish: Matte-Tin
Tape & Reel
F66
Standard quantities available on reel
7” reels with 20, 50, 100, 200, 500 or 1K devices
Suggested Layout for PCB Design
Evaluation Board
PL-587
TB-1061-23HLN+
ENV08T9
Environmental Ratings
ESD Rating
Human Body Model (HBM): Class 1B (Pass 500 V) in accordance with ANSI/ESD STM 5.1 - 2001
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
MSL Test Flow Chart
Start
Visual
Inspection
Electrical Test
SAM Analysis
Soak
85°C/85RH
168 hours
Reflow 3 cycles,
260°C
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test
SAM Analysis
Stop
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this
specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria
and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);
Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies
thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 5 of 5
©2020 ICPDF网 联系我们和版权申明