YSF-272+ [MINI]
Flat Gain Amplifier; 平坦增益放大器型号: | YSF-272+ |
厂家: | MINI-CIRCUITS |
描述: | Flat Gain Amplifier |
文件: | 总5页 (文件大小:1322K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
™
Mini-Circuits System In Package
Flat Gain Amplifier
YSF-272+
The Big Deal:
• Ultra Flat Gain Response:
0.7 dꢀ over 2300-2700 MHz
• Excellent Combination of gain,
P1dꢀ, IP3 and NF
CASE STYLE: DL1020
• 50Ω Input and Output:
no External Components Required
Product Overview:
YSF-272+ is an advanced amplifier module in a Mini-Circuits System In Package
™ . This module is fully
matched to 50Ω in/out impedance and has built-in Input & Output DC block capacitors. It is enclosed in a
5 x 6 mm MCLP plastic package. The YSF-272+ uses E-PHEMT technology enabling it to work with a
single positive supply voltage.
Key Features
Feature
Advantages
The YSF-272+ provides industry leading gain flatness over the 2GHz Wimax and
UMTS bands (2.3,2.5 and 2.5 to 2.7GHz) making this ideal for use in applications
where gain-flatness and repeatability are critical performance requirements.
Superior Gain Flatness 0.7dꢀ
The YSF-272+ is a two-stage design with internal feedback and bias to provide flat
20 dꢀ nominal gain, supporting applications where a single gain block must overcome
large system losses such as long cable runs and lossy components.
High Gain
The YSF-272+ provides a strong combination of performance parameters including
high gain (20 dꢀ), high IP3 (+35 dꢀm) and P1dꢀ (+20 dꢀm) and low noise figures (2.4
dꢀ) that are difficult to achieve in a single stage design and available only in the YSF
amplifier series.
Strong Combination of Performance
The YSF-272+ includes all support circuits including: Matching, ꢀias and DC ꢀlock-
ing, all integrated into a single 5x6mm package making the total footprint equal to or
smaller than most solutions.
Integrated Matching, DC ꢀlocking and
ꢀias in Small Package
The YSF-272+ includes integrated input and output matching and bias circuits to
make this amplifier a simple, complete drop-in solution. The matching circuits provide
excellent output return loss (20dꢀ), and are designed to give optimal P1dꢀ and IP3
performance in a 50Ω environment.
Excellent Return Loss
High Reverse Isolation
With 30 dꢀ of reverse isolation – the YSF-272+ is an ideal gain block for use in inte-
grated systems to minimize VSWR interactions resulting from cascading highly reflec-
tive components such as sharp filters.
®
For detailed performance specs
& shopping online see web site
Mini-Circuits
ISO 9001 ISO 14001 AS 9100 CERTIFIED
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 1
™
Mini-Circuits System In Package
Flat Gain Amplifier
• Matched 50-ohm surface mount amplifier
• High gain, 19 dB typ.
• Up to +20 dBm typ. output power
• High IP3, +35 dBm
• Low Noise Figure, 2.5 dB typ.
• High directivity, 30 dB isolation
• Internal Input & Output DC Block
• Separate terminal for DC
2.3-2.7 GHz
YSF-272+
Product Features
CASE STYLE: DL1020
PRICE: $2.59 ea. QTY. (20)
+ RoHS compliant in accordance
with EU Directive (2002/95/EC)
The +Suffix has been added in order to identify RoHS
Compliance. See our web site for RoHS Compliance
methodologies and qualifications.
Typical Applications
• WiMax
• Portable Wireless
• Receivers & transmitters
• Radar
General Description
YSF-272+ is an advanced amplifier module in a Mini-Circuits System In Package
™ . This module is fully
matched to 50Ω in/out impedance and has built-in Input & Output DC block capacitors. It is enclosed in a
5 x 6 mm MCLP plastic package. The YSF-272+ uses E-PHEMT* technology enabling it to work with a
single positive supply voltage.
simplified schematic and pad description
8
7
6
5
NC NC NC RF IN
DC
PADDLE
RF IN
RF OUT
NC NC RF OUT DC IN
1
2
3
4
Pad
Number
Function
Description
RF-IN
RF-OUT
DC
5
3
RF Input
RF Output
DC Supply
4
GND
Paddle
1,2,6,7,8
Connected to ground
No internal connection
NOT USED
*Enhancement mode Pseudomorphic High Electron Mobility Transistor
®
For detailed performance specs
& shopping online see web site
Mini-Circuits
ISO 9001 ISO 14001 AS 9100 CERTIFIED
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
REV. OR
M128712
YSF-272+
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard 110203
Page 2
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
™
Flat Gain Amplifier
Electrical Specifications(1) at 25°C, Zo=50Ω unless noted
YSF-272+
Parameter
Condition (MHz)
Min.
2300
17.6
17.1
16.2
Typ.
Max.
2700
21.5
21.5
20.5
Units
Frequency Range
MHz
2300
2500
2700
19.5
19.0
18.0
0.7
Gain
dꢀ
dꢀ
dꢀ
Gain Flatness
Input Return Loss
2300
2500
2700
2300
2500
2700
12.6
15.0
18.0
20.0
17.0
14.0
30.0
20.0
20.0
20.0
21.0
34.0
35.0
35.0
2.5
10.0
12.0
Output Return Loss
dꢀ
Reverse Isolation
dꢀ
2300
2500
2700
Output Power @1 dꢀ compression
Output Power @3 dꢀ compression
Output IP3
18.0
30.0
dꢀm
dꢀm
dꢀm
2300
2500
2700
2300
2500
2700
Noise Figure
2.5
3.5
dꢀ
2.5
Device Operating Voltage
5
V
Device Operating Current
118
2
145
mA
Device Current Variation vs. Temperature(2)
Device Current Variation vs Voltage
Thermal Resistance, junction-to-ground lead(3)
µA/°C
mA/mV
°C/W
0.002
56
(1) Measured on Mini-Circuits Characterization test board TB-589+. See Characterization Test Circuit (Fig. 1)
(2) D(+85°C to -45°C)
(3) Thermal Resistance= Hot spot temperature - Ground lead temperature
Power Dissipation
DC Current Histogram
USL
Absolute Maximum Ratings
Parameter
Ratings
Units
Operating Temperature(4)
Storage Temperature
DC Voltage on Pad 4
Power Dissipation
Input Power
-40 to 85
°C
°C
-65 to 150
7
V
1.5
21
W
dꢀm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
(4) Case is defined as ground paddle.
DC Current (mA)
USL=Upper Spec Limit
®
For detailed performance specs
& shopping online see web site
Mini-Circuits
ISO 9001 ISO 14001 AS 9100 CERTIFIED
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 3
™
Flat Gain Amplifier
YSF-272+
Characterization Test Circuit
Vs (Supply Voltage)
4
3
5
RF-OUT
RF-IN
TB-589+
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization Test Fixture TB-589+)
Gain, Return loss, Output power at 1dꢀ compression (P1 dꢀ), Output IP3 (OIP3) and Noise Figure measured using Agilent’s N5242A
PNA-X microwave network analyzer.
Conditions:
1. Gain: Pin= -25dꢀm
2. Output IP3 (OIP3): Two tones, spaced 10 MHz apart, 2.5 dꢀm/tone at output.
Recommended Application Circuit
(refer to evaluation board for PCB Layout and component values)
Vs
C1
4
3
5
RF-OUT
RF-IN
Paddle
Fig 2. Recommended Application Circuit
Product Marking
YSF
index over pin 1
®
For detailed performance specs
& shopping online see web site
Mini-Circuits
ISO 9001 ISO 14001 AS 9100 CERTIFIED
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 4
™
Flat Gain Amplifier
YSF-272+
Additional Detailed Technical Information
(additional information is available on our web site. To access this information enter the model number on our web site home page)
go!
go!
go!
go!
go!
go!
go!
go!
Data Table
Performance Data
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
DL1020 Plastic package, exposed paddle, lead
finish: tin/silver/nickel
Case Style
Tape & Reel
F68
Standard quantities available on reel
7” reels with 20, 50, 100, 200, 500, or 1K devices.
Suggested Layout for PCB Design
Evaluation Board
PL-335
TB-589-5+
ENV08T1
Environmental Ratings
ESD Rating
Human ꢀody Model (HꢀM): Class 1A in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (25V) in accordance with ANSI/ESD STM5.2-1999
Attention
Observe precautions
for handling electrostatic
sensitive devices
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
MSL Test Flow Chart
Start
Visual
Electrical Test
SAM Analysis
Inspection
Soak
85°C/85RH
168 hours
Reflow 3 cycles,
260°C
ꢀake at 125°C,
24 hours
Visual
Inspection
Electrical Test
SAM Analysis
®
For detailed performance specs
& shopping online see web site
Mini-Circuits
ISO 9001 ISO 14001 AS 9100 CERTIFIED
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 5
相关型号:
©2020 ICPDF网 联系我们和版权申明