ZHL-30W-252 [MINI]
High Power Amplifier;型号: | ZHL-30W-252 |
厂家: | MINI-CIRCUITS |
描述: | High Power Amplifier |
文件: | 总3页 (文件大小:316K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Coaxial
High Power Amplifier
ZHL-30W-252+
50Ω 30W 600 to 2500 MHz
The Big Deal
• Wideband, 600 to 2500 MHz
Extended
Bandwidth
• High gain, 50 dB
• Excellent gain flatness, 1.0 dB
Covers Telecom
ZHL-30W-252-S+
ZHL-30W-252X-S+
Band 71
• High IP3, +38 dBm
(617 – 698 MHz)
Product Overview
Mini-Circuits’ ZHL-30W-252+ is a high-power connectorized amplifier supporting a wide range of applications from
600 to 2500 MHz, such as test instrumentation, SatCom, and mobile communications systems, including those op-
erating in the new telecom Band 71 allocation (617 to 698 MHz). This model provides +46 dBm output power at
saturation and extremely flat gain (50 1.3 dB) across its full bandwidth, making it ideal for systems where consistent
performance across frequency is required. The amplifier operates on a 15V DC supply and comes housed in compact
aluminum alloy case (9.85 x 7.3 x 6.5”) with SMA connectors, and an optional heat sink and fan for efficient cooling.
Key Features
Feature
Advantages
One amplifier supports a broad range of system and test lab applications. Extended bandwidth
down to 600 MHz supports new telecom Band 71 allocation (617 to 698 MHz)
Wideband, 600 to 2500 MHz
High gain, 50 dB
Reduces the number of gain stages, lowering component count and overall system cost.
Provides consistent performance across frequency, minimizing the need for external equalizing
networks in wideband applications.
Excellent gain flatness, 1.0 dB
High output power, +46 dBm P3dB
High OIP3, +52 dBm
Supports a wide range of power requirements.
Provides highly linear performance with excellent sensitivity and two-tone spur-free dynamic
range.
The unit features immunity to open and short loads under full CW output power and automatically
shuts off when the base plate temperature exceeds +80°C.
Built-in protections
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Coaxial
High Power Amplifier
ZHL-30W-252+
50Ω 30W 600 to 2500 MHz
Features
• High power, 30Watt
• Low Current consumption, 5A typ.
• High IP3, +52 dBm typ.
• Useable over 500 to 2600 MHz
• Good gain flatness, ±±.0 dB typ.
• No damage with an open or short output load under full
CW output power
• Shuts off when base plate temperature exceeds +80°C
• Accepts wide range of DC supply voltage +25V to +29V
Model No.
Case Style
Connectors
ZHL-30W-252-S+
BT±344
ZHL-30W-252X-S+▲
SMA / D-Sub Male
Applications
• Cellular
• PCN
ꢀꢁꢂꢃꢄ ꢅꢂꢆꢇꢈꢉanꢊ
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• GSM
• ISM
• Lab Test
Electrical Specifications at 25°C
ZHL-30W-252-S+
ZHL-30W-252X-S+ ▲
Parameter
Min.
600
47
Typ.
—
Max.
2500
55
Min
600
47
Typ.
—
Max.
2500
55
Units
MHz
dB
Frequency Range
Gain1
50
50
Gain Flatness
—
—
2.0
—
—
—
2.0
—
dB
Output Power at 1dB compression
Saturated Output Power at 3dB compression
Noise Figure
+43
+44
—
+44
+46
5.5
+52
1.3
1.2
28
+43
+44
—
+44
+46
5.5
+52
1.3
1.2
28
dBm
dBm
dB
—
—
—
—
Output third order intercept point
Input VSWR
—
—
—
—
dBm
:1
—
—
—
—
Output VSWR
—
—
—
—
:1
DC Supply Voltage
—
29
—
29
V
Supply Current2
—
—
6.3
—
—
6.0
A
▲ Heat sink and fan not included. Alternative heat sinking and heat
removal must be provided by the user to limit maximum base-plate
temperature to 85°C, in order to ensure proper performance. For ref-
erence, this requires thermal resistance of user’s external heat sink
to be 0.2°C/W max.
1. Small signal input power -35 dBm typ.
2. Power Supply should be capable of delivering 7.5A at start up.
Outline Drawing
Maximum Ratings
Parameter
Operating Temperature
Storage Temperature
Ratings
-20°C to 60°C
-55°C to 100°C
85°C
Base Plate Temperature
Input RF Power (no damage)
0 dBm
Permanent damage may occur if any of these limits are exceeded.
D-Sub Male Connector Pin Connections**
Label on
MOUNTING INFORMATION FOR MODELS WITHOUT HEATSINK.
Pin Function
unit
Pin # Color Gauge
N/C1, N/C2
N/C4, N/C5
None
1,2,4,5 None
None
Thermal Shut-Off Indication:
Shut-Off: 2 to 5V
26
AWG
TTL Out
3
Orange
Not Shut-Off: 0 to 0.8V
18
AWG
DC Input (+)
Ground
Vdc
6,7
8,9
Red
inch
Outline Dimensions (
)
mm
18
AWG
GND
Black
A
B
C
D
E
F
G
.13
3.30
J
.37
K
2.87
L
.71
P
3.58
Q
.5
R
5.95
S
5.1
T
wt
9.85
7.3
6.5
6.00
1.00
3.75
.135 grams*
3.43 4265
**Each amplifier includes an additional D-Sub connector for mating
with the amplifier.
250.19 185.42 165.10 152.40 25.40 95.25
9.40 72.90 18.03 90.93 12.70 151.13 129.54
*580 grams without heatsink
Notes
REV. F
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
M167682
ZHL-30W-252+
ED-13288
180504
®
Page 1
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Typical Performance Data/Curves
ZHL-30W-252+
FREQUENCY
(MHz)
GAIN
(dB)
DIRECTIVITY
(dB)
VSWR
(:1)
NOISE
FIGURE
(dB)
POUT
at 1 dB
COMPR.
(dBm)
OUTPUT
IP3
(dBm)
28V
28V
IN
OUT
28V
28V
28V
600
700
800
49.25
49.38
49.61
50.28
50.84
51.43
50.87
50.21
51.57
51.24
50.67
50.53
51.17
43.44
49.04
57.64
53.57
47.78
48.87
54.00
49.94
40.56
43.12
43.78
45.23
41.20
1.53
1.53
1.42
1.37
1.45
1.56
1.56
1.43
1.33
1.25
1.25
1.16
1.15
1.29
1.07
1.08
1.10
1.06
1.04
1.08
1.21
1.16
1.14
1.07
1.18
1.36
5.56
5.62
5.58
5.52
5.44
5.43
5.31
5.42
5.64
5.78
5.77
5.82
5.81
42.48
43.82
43.97
43.39
43.30
44.86
46.31
44.05
44.96
44.51
44.98
43.80
43.53
50.94
51.67
52.24
52.05
52.15
52.65
53.33
52.25
51.89
51.56
51.45
51.78
51.76
900
1000
1200
1400
1600
1800
2000
2200
2400
2500
ZHL-30W-252+
GAIN
ZHL-30W-252+
DIRECTIVITY
ZHL-30W-252+
VSWR
at 28V
80
at 28V
at 28V
2.0
55
53
51
49
47
45
IN
OUT
1.8
1.6
1.4
1.2
1.0
70
60
50
40
30
600
1000
1400
1800
2200
2600
600
1000
1400
1800
2200
2600
600
1000
1400
1800
2200
2600
FREQUENCY (MHz)
FREQUENCY (MHz)
FREQUENCY (MHz)
ZHL-30W-252+
NOISE FIGURE
ZHL-30W-252+
IP3
ZHL-30W-252+
OUTPUT POWER AT 1-dB COMPRESSION
at 28V
at 28V
7.0
at 28V
60
55
50
45
40
50
48
46
44
42
40
6.5
6.0
5.5
5.0
600
1000
1400
1800
2200
2600
600
1000
1400
1800
2200
2600
600
1000
1400
1800
2200
2600
FREQUENCY (MHz)
FREQUENCY (MHz)
FREQUENCY (MHz)
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Page 3
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
相关型号:
©2020 ICPDF网 联系我们和版权申明