ZX75BP-893-S+ [MINI]
Bandpass Filter;型号: | ZX75BP-893-S+ |
厂家: | MINI-CIRCUITS |
描述: | Bandpass Filter |
文件: | 总3页 (文件大小:612K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Coaxial
Coaxial-Ceramic Resonator Filters and Multiplexers
50Ω
DC to 6 GHz
The Big Deal
• Low insertion loss with excellent power handling
• Passbands up to 6 GHz
• Fractional bandwidth from 3 to 25%
• Excellent temperature stability
• Rugged construction to handle demanding
environmental conditions
Product Overview
Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic
material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer
designs can be constructed using this technology. Low insertion loss combined with excellent power handling
makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction
can achieve stopband width greater than 3x the center frequency
All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding
reflow cycles. Custom integrated assembly with LNA in greatly simplifying system integration. They can be realized
in small form factors with high-quality, precise machining for applications where size is critical. Excellent repeat-
ability across units is achieved through precise tuning and process control.
Key Features
Feature
Advantages
Low insertion loss
Low signal loss results in better SNR in signal chain
Fast roll-off
Higher selectivity results in better adjacent channel rejection and dynamic range
Wide spur-free stopband results in better receiver sensitivity
Well suited for transmitter applications
Wide stop band
Excellent power handling
Rugged Construction
Small Size
These filter assemblies have been qualified over a wide range of thermal, mechanical and environ-
mental conditions including withstanding the stress of extensive solder reflow cycles
Very well suited for high performance applications where size is a constraint.
Very minimal change in electrical performance across temperature makes these filters suitable for
a wide range of operating conditions.
Temperature stability
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 3
Coaxial
Bandpass Filter
50Ω 870 to 915 MHz
ZX75BP-893+
CASE STYLE: HY1238
Features
• Low Insertion loss
• High selectivity
Connectors
Model
SMA-M\F
ZX75BP-893-S+
• Good VSWR
• Connectorized package
Electrical Specifications at 25°C
Parameter
F#
Frequency (MHz)
Min.
Typ.
Max.
Unit
-
-
-
-
892.5
0.9
1.3
40
-
2
-
MHz
dB
:1
Center Frequency
Insertion Loss
VSWR
Insertion Loss
VSWR
Insertion Loss
VSWR
F1-F2
F1-F2
DC-F3
DC-F3
F4-F5
F4-F5
870-915
870-915
DC - 750
DC - 750
1050-1800
1050-1800
Pass Band
Applications
-
20
-
-
dB
:1
• Aviation
Stop Band, Lower
Stop Band, Upper
20
-
• Public cellular network, GSM
• Cellular services
• Defense systems
20
-
30
-
dB
:1
20
-
Maximum Ratings
-40°C to 85°C
Operating Temperature
Storage Temperature
RF Power Input*
-55°C to 100°C
Functional Schematic
5 W max.
RF Iꢃ
RF OUT
* Passband rating, derate linearly to 3.5W at 85°C ambient.
Permanent damage may occur if any of these limits are exceeded.
Typical Performance Data at 25°C
Frequency
(MHz)
Insertion Loss
VSWR
(:1)
Frequency
(MHz)
Group Delay
(nsec)
(dB)
1.0
500.0
750.0
774.0
797.0
816.0
832.0
870.0
880.0
892.5
893.0
915.0
955.0
975.0
1005.0
1040.0
1050.0
1500.0
1700.0
1800.0
104.63
59.74
40.06
30.24
20.15
10.69
3.53
0.93
0.90
0.89
0.89
4103.70
160.27
63.36
52.01
35.20
14.75
3.60
1.06
1.09
1.13
1.14
1.21
4.20
18.09
50.28
70.22
72.44
79.78
78.37
76.27
870.0
872.0
875.0
877.0
880.0
885.0
887.0
890.0
892.5
893.0
895.0
897.0
900.0
903.0
905.0
907.0
908.0
910.0
912.0
915.0
8.18
8.07
7.94
7.86
7.76
7.62
7.58
7.52
7.49
7.49
7.46
7.45
7.44
7.45
7.45
7.47
7.48
7.51
7.54
7.62
Typical Frequency Response
FRꢁꢂUꢁꢃCꢄ (MHz)
F3 F1
Fꢀ Fꢅ
F5
DC
0.93
3.76
10.80
20.84
30.18
32.61
42.84
42.09
41.87
ZX75BP-893+
INSERTION LOSS (Full band)
ZX75BP-893+
INSERTION LOSS (Pass band)
0
20
0
5
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
10
15
20
25
30
40
0.80
60
0.90
80
1.00
870.0
892.5
915.0
960
100
0
200 400 600 800 1000 1200 1400 1600 1800
FREQUENCY (MHz)
760
810
860
910
1010
1060
FREQUENCY (MHz)
ZX75BP-893+
VSWR
ZX75BP-893+
GROUP DELAY
8.2
8.1
8.0
7.9
7.8
7.7
7.6
7.5
7.4
1000
100
10
1.30
1.15
1.00
870
892.5
915
1
0
200 400 600 800 1000 1200 1400 1600 1800
FREQUENCY (MHz)
870
879
888
897
906
915
FREQUENCY (MHz)
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
REV.OR
M163771
ZX75BP-893+
EDU2757
URJ
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
171127
Page 2 of 3
ZX75BP-893+
Bandpass Filter
Coaxial Connections
INPUT
SMA-MALE
SMA-FEMALE
OUTPUT
Outline Drawing
C
4x K
4x ØN
L
OUT
IN
D
G
B
F
SMA FEMALE
CONN.
SMA MALE
CONN.
J
H
A
E
M
Outline Dimensions ( inch
)
mm
A
B
C
D
E
F
.17
G
1.20
.75
.46
1.18
.04
1.00
30.48
19.05
11.68
29.97
1.02
4.32
25.40
H
.50
J
.35
K
.18
L
.21
M
2.05
N
.106
2.69
Wt.
grams
35.0
12.70
8.89
4.57
5.28
52.07
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明