MSDWI03-24S033 [MINMAX]
DC/DC CONVERTER 3W, Ultra compact SMD Package;
| 型号： | MSDWI03-24S033 |
| 厂家： | 
MINMAX TECHNOLOGY CO., LTD. |
| 描述： | DC/DC CONVERTER 3W, Ultra compact SMD Package |
| 文件： | 总4页 (文件大小：335K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
MSDWI03 SERIES
DC/DC CONVERTER 3W, SMD Package
FEATURES
►Ultra compact SMD Package
24.0 x 13.7 x 8.0 mm (0.94 x 0.54 x 0.31 inches)
►Efficiency up to 80%
►I/O-isolation 1500VDC
►Ultra-wide 4:1 Input Range
►Operating Temp. Range -40°C to +80°C
►Remote On/Off Control
►Input Filter meets EN 55022,class A and FCC, level A
►CSA/UL/IEC/EN 60950-1 Safety Approval
►Qualified for lead-free Reflow Solder Process according
IPC/JEDEC J-STD-020D
► 3 Years Product Warranty
PRODUCT OVERVIEW
Minmax's MSDWI03 series power modules are in mini-SMD DC/DC converters that operate over input voltage ranges of 9-36VDC and 18-75VDC which
provide precisely regulated output voltages of 3.3V, 5V, 12V, 15V, 24V, ±5V, ±12V and ±15VDC.
Pin compatible with the MDW1000 series, the MDWI03 offers a power rating up to 3W and a typical full-load efficiency of 80%, continuous short circuit,
remote on/off control, EN55022 Class A conducted noise compliance minimize design-in time, cost and eliminate the need for external filtering.
The MSDWI03 series is an excellent selection for data communication equipment, mobile battery driven equipment, distributed power system,
telecommunication equipment, mixed analog/digital subsystem, process/machine control equipment, computer peripheral equipment and industrial robot
system.
Model Selection Guide
Model
Input
Voltage
(Range)
VDC
Output
Output
Input Current
Max. capacitive
Load
Efficiency
(typ.)
Number
Voltage
Current
@Max. Load
@No Load
mA(typ.)
Max.
Min.
@Max. Load
VDC
3.3
5
12
15
mA
600
600
250
200
mA
90
90
38
30
mA(typ.)
110
160
156
156
156
162
156
156
55
μF
220
220
47
47
47
47#
47#
47#
220
220
47
47
47
47#
47#
47#
%
75
78
80
80
80
77
80
80
75
78
80
80
80
77
80
80
MSDWI03-24S033
MSDWI03-24S05
MSDWI03-24S12
MSDWI03-24S15
MSDWI03-24S24
MSDWI03-24D05
MSDWI03-24D12
MSDWI03-24D15
MSDWI03-48S033
MSDWI03-48S05
MSDWI03-48S12
MSDWI03-48S15
MSDWI03-48S24
MSDWI03-48D05
MSDWI03-48D12
MSDWI03-48D15
24
(9 ~ 36)
30
24
125
19
±5
±12
±15
3.3
5
12
15
24
±300
±125
±100
600
600
250
200
125
±300
±125
±100
±45
±19
±15
90
90
38
30
19
±45
±19
±15
80
78
78
78
81
78
78
48
(18 ~ 75)
20
±5
±12
±15
# For each output
Input Specifications
Parameter
Model
Min.
-0.7
-0.7
4.5
8.5
---
Typ.
---
---
6
Max.
50
Unit
VDC
mW
24V Input Models
48V Input Models
24V Input Models
48V Input Models
24V Input Models
48V Input Models
Input Surge Voltage (1 sec. max.)
Start-Up Threshold Voltage
Under Voltage Shutdown
100
8.5
17
12
---
---
---
8
---
16
Short Circuit Input Power
Conducted EMI
---
2000
All Models
Compliance to EN 55022,class A and FCC part 15,class A
E-mail:sales@minmax.com.tw
Tel:886-6-2923150
2012/07/16 REV:17
Page 1 of 4
®
MSDWI03 SERIES
DC/DC CONVERTER 3W, SMD Package
Output Specifications
Parameter
Conditions
Min.
---
Typ.
---
Max.
±2.0
±2.0
±1.0
±1.2
100
Unit
%Vom.
%
Output Voltage Setting Accuracy
Output Voltage Balance
Line Regulation
At 50% Load and Nominal Vin
Dual Output, Balanced Loads
Vin=Min. to Max.
---
±1.0
±0.5
±0.5
50
---
%
Io=15% to 100%
Load Regulation
---
%
Ripple & Noise (20MHz)
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Over Load Protection
Short Circuit Protection
---
mV P-P
μsec
%
---
300
±3
600
25% Load Step Change
Foldback
---
---
---
±0.01
150
±0.02
---
%/℃
%
110
Continuous
General Specifications
Parameter
Conditions
60 Seconds
500 VDC
Min.
1500
1000
---
Typ.
---
Max.
---
Unit
VDC
MΩ
I/O Isolation Voltage (rated)
I/O Isolation Resistance
I/O Isolation Capacitance
Switching Frequency
MTBF (calculated)
---
---
100KHz, 1V
350
350
---
500
---
pF
---
KHz
Hours
MIL-HDBK-217F@25℃, Ground Benign
300,000
---
Moisture Sensitivity Level (MSL)
Safety Approvals
IPC/JEDEC J-STD-020D
Level 2
UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1(CB-scheme)
Input Fuse
24V Input Models
48V Input Models
1500mA Slow-Blow Type
800mA Slow-Blow Type
Remote On/Off Control
Parameter
Conditions
Min.
Typ.
Max.
Unit
Converter On
Converter Off
2.5V ~ 5.5V or Open Circuit
-0.7V ~ 0.8V
Control Input Current (on)
Control Input Current (off)
Control Common
Vctrl = Min. to Max.
Vctrl = Min. to Max.
---
---
---
-400
-400
μA
μA
---
Referenced to Negative Input
---
Standby Input Current
---
5
mA
Environmental Specifications
Parameter
Conditions
Natural Convection
Min.
-40
---
Max.
+80
Unit
℃
℃
℃
% rel. H
Operating Ambient Temperature Range (See Power Derating Curve)
Case Temperature
+105
+125
95
-50
---
Storage Temperature Range
Humidity (non condensing)
Cooling
Free-Air convection
---
Lead Temperature (1.5mm from case for 10Sec.)
260
℃
Power Derating Curve
(3.3& 5V Output)
(all other output)
E-mail:sales@minmax.com.tw
Tel:886-6-2923150
2012/07/16 REV:17
Page 2 of 4
®
MSDWI03 SERIES
DC/DC CONVERTER 3W, SMD Package
Notes
1
2
3
4
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
Ripple & Noise measurement bandwidth is 0-20MHz.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however, they may not meet all specifications listed.
5
6
7
8
9
All DC/DC converters should be externally fused at the front end for protection.
Other input and output voltage may be available, please contact factory.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
It is not recommended to use water-washing process on SMT units.
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Connecting Pin Patterns
17.78 [0.70]
24.0[0.94]
3.11
15.24 [0.60]
2.54
1.4 [0.06](Min)
[0.10]
[0.12]
2.8 [0.11]
16
10
9
8
19.3 [0.76]
1
2
7
2.54 [0.10]
12.7 [0.50]
2.54 [0.10]
1.00
[0.04]
S SEATING
PLANE
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05(±0.002)
0.1
S
Pin Connections
Physical Characteristics
Case Size
Pin
1
Single Output
Dual Output
-Vin
:
:
:
:
24.0x13.7x8.0 mm (0.94x0.54x0.31 inches)
-Vin
Remote On/Off
NC
2
Remote On/Off
NC
Case Material
Pin Material
Weight
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
7
8
NC
Common
+Vout
phosphor bronze
4.2g
9
+Vout
10
16
-Vout
-Vout
+Vin
+Vin
NC: No Connection
E-mail:sales@minmax.com.tw
Tel:886-6-2923150
2012/07/16 REV:17
Page 3 of 4
®
MSDWI03 SERIES
DC/DC CONVERTER 3W, SMD Package
Test Setup
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.47μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between
50 mm and 75 mm from the DC/DC Converter.
Copper Strip
Cout
+Vin
+Out
Copper Strip
+Vin
+Out
Com.
-Out
Scope
Scope
Single Output
DC / DC
Converter
Dual Output
DC / DC
Converter
Resistive
Load
Resistive
Load
Cout
Scope
Copper Strip
Cout
-Vin
-Out
Copper Strip
-Vin
Copper Strip
Technical Notes
Remote On/Off
Positive logic remote on/off turns the module on during a logic high voltage on the remote on/off pin, and off during a logic low. To turn the power module on and off,
the user must supply a switch to control the voltage between the on/off terminal and the -Vin terminal. The switch can be an open collector or equivalent.
A logic low is -0.7V to 0.8V. A logic high is 2.5V to 5.5V. The maximum sink current of the switch at on/off terminal during a logic low is -300 μA.
The maximum sink current of the switch at on/off terminal during a logic high is -200μA or open.
Overcurrent Protection
To provide protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure current limiting for an unlimited
duration. At the point of current-limit inception, the unit shifts from voltage control to current control. The unit operates normally once the output current is brought back
into its specified range.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module.
In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR <
1.0Ω at 100 KHz) capacitor of a 4.7μF for the 24V input devices and a 2.2μF for the 48V devices.
+
+Vin
+Out
+
DC / DC
Converter
DC Power
Source
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 3.3μF capacitors at the output.
+
+Vin
-Vin
+Out
+
+Vin
-Vin
+Out
Com.
-Out
Single Output
DC / DC
Converter
Load
Load
Dual Output
DC / DC
Converter
DC Power
Source
Cout
Cout
DC Power
Source
Cout
Load
-
-Out
-
Maximum Capacitive Load
The MSDWI03 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 105℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
Air Flow
50mm / 2in
15mm / 0.6in
DUT
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw
2012/07/16 REV:17 Page 4 of 4
相关型号：
©2020 ICPDF网 联系我们和版权申明