MM3363A [MITSUMI]
150mA LDO with auto power save;型号: | MM3363A |
厂家: | MITSUMI ELECTRONICS, CORP. |
描述: | 150mA LDO with auto power save |
文件: | 总12页 (文件大小:149K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MITSUMI
150mA LDO with auto power save MM336x
150mA LDO with auto power save
Monolithic IC MM336x
Outline
This IC is a 150 mA LDO featuring automatic power-saving.
This device automatically switches between a high-speed operation mode and low-power mode depending
on the load current. In the low power mode, current consumption is lowered to 4.5 µA.
This device is suitable for cell-phones which require low power consumption in standby mode and other such
applications.
Features
1. Input voltage range
2. Output voltage range
3. Output voltage accuracy
4. Maximum output current
5. Supply current
2~6V
1.5~5V
VOUT 1%
150mA
4.5µA typ. (No-load)
0.01µA typ. (OFF)
1µF
6. Output capacitor
7. Dropout capacitor
8. Short current
0.14V typ. (VO=3V, IO=100mA)
50mA typ.
9. Line regulation
10. Load regulation
11. Ripple rejection
0.01%/V
15mV typ. (IO=1~80mA)
70dB typ. (f=1kHz)
Package
SOT-25A
SSON-4B
Applications
1. Mobile phones
2. Digital still cameras
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
Block Diagram
VDD
VOUT
CE
Bias
Vref
Current
Limit
GND
Pin Assignment
1
2
3
4
5
VDD
GND
CE
NC
VOUT
1
2
3
4
CE
VDD
VOUT
GND
4
1
3
2
5
1
4
3
2
SSON-4B
(TOP VIEW)
-
SOT 25A
(TOP VIEW)
Pin Description
SOT-25A
SSON-4B
Pin No. Pin name
Functions
Pin No. Pin name
Functions
ON/OFF−Control pin
1
2
VDD
GND
Voltage−supply pin
GND pin
CE
Low
High
OUTPUT
OFF
ON/OFF−Control pin
1
CE
CE
Low
High
OUTPUT
OFF
ON
Connect CE pin with VDD pin,
when it is not used.
3
CE
ON
Connect CE pin with VDD pin,
when it is not used.
2
3
4
VDD
VOUT
GND
Voltage−supply pin
Output pin
GND pin
4
5
NC
VOUT
No connection
Output pin
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
(Except where noted otherwise Ta=25°C)
Absolute Maximum Ratings
Item
Symbol
TSTG
VDD
VCE
VOUT
Iomax
Ratings
Units
°C
V
V
V
Storage Temperature
Supply Voltage
CE input Voltage
Output Voltage
Output Current
−55~+150
-0.3~7.0
0.3~VDD+0.3
0.3~VDD+0.3
200
-
-
mA
350(Note1)
330(Note2)
SOT-25A
SSON-4B
Power Dissipation
Pd
mW
Note1 : With PC Board of glass epoxy (60 40 1.6tmm)
Note2 : With PC Board of glass epoxy (110 40 0.8tmm)
(
Except where noted otherwise Ta=25°C)
Recommended Operating Conditions
Item
Symbol
TJOP
VOP
Ratings
40~85
2.0~6.0
0~150
Units
°C
V
Operating Ambient Temperature
Operating Voltage
Output Current
-
IO
mA
(Except where noted otherwise VDD=VOUT(typ.)+1V, VCE=VDD, Ta=25°C)
Electrical Characteristics 1
Item
Symbol
IDDoff
IDD
Measurement conditions
VCE=0V
Min. Typ. Max. Units
Input Current(OFF)
No-Load Input Current
GND PIN Current
Output Voltage
0.01 1.0
µA
µA
µA
V
IOUT=0mA
4.5
10
Ignd
IOUT=5mA
12
VOUT
IOUT=30mA
0.99
1.01
VDD=Vo(typ.)+0.5~6V, IOUT=30mA
(VOUT 1.6V, VDD=2.2~6V)
Line Regulation
VLINE
0.01 0.2 %/V
Load Regulation
Dropout Voltage
VLOAD
Vio
1mA IOUT 80mA
15
50
mV
V
Please refer to another page
f=1kHz, Vripple=0.5V, IOUT=30mA
1.5V Vout 4.0V
Ripple Rejection 1 (Note3)
Ripple Rejection 2 (Note3)
Ripple Rejection 3 (Note3)
Ripple Rejection 4 (Note3)
VOUT Temperature Coefficient (Note3)
RR1
RR2
RR3
RR4
70
55
45
35
dB
dB
f=10kHz, Vripple=0.5V, IOUT=30mA
1.5V Vout 4.0V
f=1kHz, Vripple=0.5V, IOUT=30mA
VOUT 4.0V
dB
f=10kHz, Vripple=0.5V, IOUT=30mA
VOUT 4.0V
dB
IOUT=30mA
VOUT
/
T
100
50
ppm/°C
-
40 TOP 85°C
Output Short-circuit Current
CE High Threshold Voltage
CE Low Threshold Voltage
CE High Threshold Current
CE Low Threshold Current
Ilim
VCEH
VCEL
ICEH
ICEL
VOUT=0V
mA
V
1.5
0.25
0.1
V
-
0.1
0.1
µA
µA
-
0.1
Note3 : The parameter is guaranteed by design.
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
(Except where noted otherwise VDD=VOUT(typ.)+1V, VCE=VDD, Ta=25°C)
Item
Electrical Characteristics 2
Model
No.
Output Voltage
OUT (V)
Dropout Voltage 1
Vio1 (V)
Dropout Voltage 2
Vio2 (V)
V
Measurement Conditions Min. Typ. Max. Measurement Conditions Min. Typ. Max. Measurement Conditions Min. Typ. Max.
MM3361F
MM3361G
1.485 1.500 1.515
1.584 1.600 1.616
IOUT=30mA
1.5V
IOUT=100mA
1.5V
MM3361H IOUT=30mA 1.683 1.700 1.717
0.1 0.15
0.08 0.12
0.6 0.8
MM3361J
MM3361K
MM3362A
MM3362B
MM3362C
MM3362D
MM3362E
MM3362F
MM3362G
MM3362H
MM3362J
MM3362Y
MM3362K
MM3363A
MM3363B
MM3363C
MM3363D
MM3363E
MM3363F
MM3363G
MM3363H
MM3363J
MM3363K
MM3364A
MM3364B
MM3364C
MM3364D
MM3364E
MM3364F
MM3364G
MM3364H
MM3364J
MM3364K
MM3365A
1.782 1.800 1.818
1.881 1.900 1.919
1.980 2.000 2.020
2.079 2.100 2.121
2.178 2.200 2.222
2.277 2.300 2.323
2.376 2.400 2.424
2.475 2.500 2.525
2.574 2.600 2.626
2.673 2.700 2.727
2.772 2.800 2.828
2.822 2.850 2.879
2.871 2.900 2.929
2.970 3.000 3.030
3.069 3.100 3.131
3.168 3.200 3.232
3.267 3.300 3.333
3.366 3.400 3.434
3.465 3.500 3.535
3.564 3.600 3.636
3.663 3.700 3.737
3.762 3.800 3.838
3.861 3.900 3.939
3.960 4.000 4.040
4.059 4.100 4.141
4.158 4.200 4.242
4.257 4.300 4.343
4.356 4.400 4.444
4.455 4.500 4.545
4.554 4.600 4.646
4.653 4.700 4.747
4.752 4.800 4.848
4.851 4.900 4.949
4.950 5.000 5.050
VOUT 1.9V
VOUT 1.9V
2.0V
2.0V
0.24 0.31
VOUT 2.4V
VOUT 2.4V
2.5V
2.5V
0.06 0.08
0.05 0.07
0.16 0.23
0.14 0.21
VOUT 2.9V
VOUT 2.9V
3.0V
3.0V
VOUT 3.2V
VOUT 3.2V
3.3V
3.3V
0.04 0.06
0.13 0.19
VOUT 5.0V
VOUT 5.0V
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
Measuring Circuit
V
COUT
GND
VOUT
CE
A
VDD
A
Cin
Application Circuit
COUT
GND
CE
VOUT
VDD
Cin
Temperature Characteristics : B
(Reference example of external parts)
· Output capacitor
· Input capacitor
Ceramic capacitor 1µF
Ceramic capacitor 1µF
· Note
1. The output capacitor is required between output and GND to prevent oscillation.
2. The ESR of capacitor must be defined in ESR stability area.
It is possible to use a ceramic capacitor without ESR resistance for output.
The ceramic capacitor must be used more than 1µF and B temperature characteristics.
3. The wire of VCC and GND is required to print full ground plane for noise and stability.
4. The input capacitor must be connected a distance of less than 1cm from input pin.
5. In case the output voltage is above the input voltage, the overcurrent flow by internal parastic diode
from output to input.
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
(Except where noted otherwise VDD=VOUT (typ.) +1V, VCE=VDD, Ta=25°C)
Input current - Input voltage
Characteristics (Vo=1.5V)
Output
-
Input voltage
RL=
2.0
10
9
8
7
6
5
4
3
2
1
0
RL=
1.5
1.0
0.5
0.0
RL=10
RL=50
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input voltage (V)
Input voltage (V)
Load regulation
GND PIN Current
20
15
10
5
40
35
30
25
20
0
HighSpeed Mode
Power Save Mode
Hysteresis
−5
−10
−15
15
10
5
−20
0
0
50
100
150
0
1
2
3
4
5
Output Current(mA)
Output current (mA)
Dropout voltage
-
Output current
Line regulation
VDD=1.3V
RL=50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
20
15
10
5
0
−5
−10
−15
−20
0
20
40
60
80
100
2
3
4
5
6
Output current (mA)
Input voltage (V)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
Load transient response (Io=0.1 150mA)
Load transient response (Io=0.1 100mA)
Cin=1µF,CO=1µF
Cin=1µF,CO=1µF
50µS/div
50µS/div
IO : 50mA/div
IO : 50mA/div
GND
GND
VO : 0.2V/div
VO : 0.2V/div
Load transient response (Io=5 100mA)
Load transient response (Io=5 150mA)
Cin=1µF,CO=1µF
50µS/div
Cin=1µF,CO=1µF
50µS/div
IO : 50mA/div
IO : 50mA/div
GND
GND
VO : 0.2V/div
VO : 0.2V/div
Ripple Rejection
Current limit
0
−10
−20
2.0
1.5
1.0
0.5
0.0
−30
IO=150mA
−40
−50
−60
−70
−80
−90
IO=30mA
IO=1mA
−100
0.01
0.1
1
10
100
1000
0
50
100 150 200 250 300
Frequency (kHz)
Output current (mA)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
(Except where noted otherwise VDD=VOUT (typ.) +1V, VCE=VDD, Ta=25°C)
Input current - Input voltage
Characteristics (Vo=3.0V)
Output
- Input voltage
RL=
4.0
20
18
16
14
12
10
8
6
4
2
0
3.0
2.0
1.0
0.0
RL=
RL=20
RL=100
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input voltage (V)
Input voltage (V)
Load regulation
GND PIN Current
20
15
10
5
40
35
30
25
20
0
Hysteresis
−5
−10
−15
15
HighSpeed Mode
Power Save Mode
10
5
−20
0
0
50
100
150
0
1
2
3
4
5
Output Current(mA)
Output current (mA)
Dropout voltage
-
Output current
Line regulation
RL=100
0.30
0.25
0.20
0.15
0.10
0.05
20
15
10
5
0
−5
−10
−15
0.00
0
−20
3
50
100
150
4
5
6
Output current (mA)
Input voltage (V)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
Load transient response (Io=0.1 150mA)
Load transient response (Io=0.1 100mA)
Cin=1µF,CO=1µF
Cin=1µF,CO=1µF
50µS/div
50µS/div
IO : 50mA/div
IO : 50mA/div
GND
GND
VO : 0.2V/div
VO : 0.2V/div
Load transient response (Io=5 100mA)
Load transient response (Io=5 150mA)
Cin=1µF,CO=1µF
50µS/div
Cin=1µF,CO=1µF
50µS/div
IO : 50mA/div
IO : 50mA/div
GND
GND
VO : 0.2V/div
VO : 0.2V/div
Ripple Rejection
Output voltage
- Temperature
0
−10
3.02
3.01
3.00
−20
−30
−40
−50
−60
−70
−80
−90
−100
IO=1mA
IO=150mA
2.99
2.98
2.97
2.96
2.95
IO=30mA
0.01
0.1
1
10
100
1000
−50 −30 −10
0
30
50
70
90 110
Frequency (kHz)
Tempereture (ºC)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
Current limit
5
4
3
2
1
0
0
50
100 150 200 250 300
Output current (mA)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
(Except where noted otherwise VDD=VOUT (typ.) +1V, VCE=VDD, Ta=25°C)
Characteristics (Vo=5.0V)
Output
- Input voltage
Input current - Input voltage
6
5
4
3
2
1
0
30
25
20
15
10
5
RL=
RL=166.6
RL=33.3
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input voltage (V)
Input voltage (V)
Load regulation
GND PIN Current
VDD=6V
VDD=6V
30
20
40
35
30
25
20
10
0
HighSpeed Mode
Hysteresis
15
10
5
−10
−20
Power Save Mode
−30
0
0
50
100
150
0
1
2
3
4
5
Output Current(mA)
Output current (mA)
Dropout voltage
-
Output current
Line regulation
VDD=4.8V
RL=166.6
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
20
15
10
5
0
−5
−10
−15
−20
0
50
100
150
200
5.5
5.6
5.7
5.8
5.6
6
Output current (mA)
Input voltage (V)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
150mA LDO with auto power save MM336x
Load transient response (Io=0.1 150mA)
Load transient response (Io=0.1 100mA)
Cin=1µF,CO=1µF
Cin=1µF,CO=1µF
50µS/div
50µS/div
IO : 50mA/div
IO : 50mA/div
GND
GND
VO : 0.2V/div
VO : 0.2V/div
Load transient response (Io=5 100mA)
Load transient response (Io=5 150mA)
Cin=1µF,CO=1µF
50µS/div
Cin=1µF,CO=1µF
50µS/div
IO : 50mA/div
IO : 50mA/div
GND
GND
VO : 0.2V/div
VO : 0.2V/div
Ripple Rejection
Current limit
VDD=6V
0
−10
−20
6
5
4
3
2
1
0
IO=30mA
−30
−40
−50
−60
−70
−80
−90
−100
IO=1mA
IO=150mA
0.01
0.1
1
10
100
1000
0
50
100 150 200 250 300
Frequency (kHz)
Output current (mA)
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
相关型号:
©2020 ICPDF网 联系我们和版权申明