MLHF302548H1-1.000MHZ-T [MMD]
Oscillator, 1MHz Min, 70MHz Max, 1MHz Nom,;型号: | MLHF302548H1-1.000MHZ-T |
厂家: | MMD COMPONENTS |
描述: | Oscillator, 1MHz Min, 70MHz Max, 1MHz Nom, |
文件: | 总2页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MLH & MLT Series Ceramic J-Lead Oscillator
Hermetically Sealed Ceramic SMD Package
Wide Frequency Range
Available to -55°C to +125°C Operating
RoHS Compliant Available
Frequency Range
1.000MHZ to 70.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
Frequency Stability (Inclusive of Temp., Load, Voltage and Aging)
Operating Temp.Range
Storage Temp. Range
Waveform
HCMOS
TTL
Logic “0”
10% Vdd max
90% Vdd min
0.4V max
2.4V max
Logic “1”
40%/60% Optional 45%/55%
50% of waveform w/HCMOS Load
40%/60% Optional 45%/55%
1.4Vdc w/TTL Load
Symmetry
Load
+3.3VDC =5 TTL or 30 pF max
+5.0VDC = 10 TTL Gates or 50pF max
Rise / Fall Time (20% to 80%)
Start Time
10 nSec max
10 mSec min
Supply Voltage (Vdd)
Jitter
+3.3 VDC ±10%
+5.0 VDC 10%
Option 1 = 1 pSec typ / Option P = 10 pSec typ
Supply Current Chart
Supply Frequency Range
Frequency Range
1.000MHZ to 25.000MHz
25.000MHZ to 40.000MHZ
40.000MHZ to 70.000MHZ
Current
9mA max
20mA max
30mA max
Current (mA)
10mA max
20mA max
30mA max
Supply
+3.3 VDC
+5.00 VDC
+5.00 VDC
1.000MHZ to 30.000MHz
30.000MHZ to 50.000MHZ
50.000MHZ to 70.000MHZ
+3.3 VDC
+3.3 VDC
+5.00 VDC
Mechanical & Environmental Detail
Marking Detail
Line 1 = MXXXXX
Humidity
85% RH, 85°C, 48 Hours
=
=
M
MMD
Hermetic Seal
Solderability
Reflow Solderability
Vibration
Leak Rate 2 X 10-8 ATM-cm3/sec max
MIL-STD-202G, Method 208
XXXXX
Line 2 = SYYWWL
S
Frequency in MHZ
=
=
Internal Code
4 Digit Date Code (Year /
Week)
260°C for 10 seconds
YYWW
=
L
Denotes RoHS Compliant
MIL-STD-202G, Method 204 35G, 50 to 2000 Hz
Line 3 = XXXXX
MIL-STD-202G, Method 203 Test Cond E, 1000G’s, ½
Sinewave
Shock
Internal use only
May vary with lots
MIL-STD-883
Available with Level B Screening
Black dot to denote Pin 1
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Revision:
07/19/11 G
Pg 1 of 2
Subject to change without notice
Part Number Guide
Frequency
ML
Ceramic SMD 4 J-Lead
Output
H = HCMOS
T = TTL
Frequency
Stability
Operating Temperature
Symmetry *
Blank = 40/60%
A = 45/55%
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Blank = 0°C to +70°C
RoHS Compliant
Blank = Not Compliant
F = is Compliant
Supply Voltage
5 = +5.0VDC
3 = +3.3VDC
Package
Blank = Bulk
T = Tape & Reel
Pin 1 Connection
Blank = No Connection
H = Tri-state
Jitter
1 = 1 pSec typ
P = 10 pSec typ
27 = -20°C to +70°C
48 = -40°C to +85°C
55 = -55°C to +125°C
B = 47.5/52.5%
Option B (47.5/52.5%) Avaible up to 50MHz only
Please Consult with MMD Sales Department for any other Parameters or Options
Mechanical Details
9.80 [.386]
MAX
4.70 [.185]
MAX
0.84 [.033]
5.08 [.200]
7.87 [.310]
PIN CONNECTIONS
TRI-STATE or NC
GROUND
2
1
3
4
PIN 1
PIN 2
PIN 3
PIN 4
14.00 [.551]
MAX
5.08 [.200]
1.02 [.040]
OUTPUT
SUPPLY VOLTAGE
7.62 [.300]
2.50 [.098]
PIN 1 INDICATOR
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
Suggested
Land Pattern
Tape & Reel Dimensions
PITCH
Tape Width
12.00 [.471]
PITCH
TAPE WIDTH
REEL DIA
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
24.00 [.945]
330 [13.0]
Q1
REEL DIA
PIN 1 ORIENT.
DIRECTION OF FEED
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Revision:
07/19/11 G
Pg 2 of 2
Subject to change without notice
相关型号:
©2020 ICPDF网 联系我们和版权申明