MTSS215EV-32.734MHZ-T [MMD]
Clipped Sine Output Oscillator,;型号: | MTSS215EV-32.734MHZ-T |
厂家: | MMD COMPONENTS |
描述: | Clipped Sine Output Oscillator, 机械 振荡器 |
文件: | 总2页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MTSS Series – 3.2 X 2.5 Ceramic SMD VCTCXO
Low Profile SMD Device
Hermetically Sealed
Tight Stability Over Temperature
Excellent Phase Noise
14.400MHZ TO 32.734MHZ
(See Frequency Stability vs Temperature Table)
(See Frequency Stability vs Temperature Table)
-40°C to +85°C
Frequency Range
Frequency Stability vs Temperature*
Operating Temperature Range
Storage Temperature Range
Aging
±1.0 per year
+2.80VDC
+3.00VDC
Supply Voltage
2mA max
Supply Current
Clipped Sinewave
0.8 Vp-p min
Output Type
Output Level
10k Ohms//10pF
Output Load
Vc = +1.40VDC
+0.40VDC to +2.40VDC
Vc = +1.5VDC
+0.50VDC to +2.50VDC
Control Voltage
±8 ppm to ±15 ppm
Frequency Tunning Range
100Hz
1kHz
-115dBc/Hz
-135dBc/Hz
-145dBc/Hz
Phase Noise
10kHz
* Inclusive of Temperature., Load and Voltage
Environmental & Mechanical Detail
Marking Detail
First Line = MXX.X (not to exceed 5 characters)
Shock
MIL-STD-883, Method 2002, Condition B
M
= MMD
Device Frequency
Solderability
MIL-STD-883, Method 2003
MIL-STD-883, Method 215
XX.X = (four digits including decimal
point)
Solvent Resistance
Vibration
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A-2
Second Line = SYWW (not to exceed 5 characters)
Gross Leak Test
Fine Leak Test
S
= Internal Code
YYWW = Date Code (Year/Week)
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Revision:
09/01/10 J
Pg 1 of 2
Revisions only with customer approval
Part Number Guide
Frequency
MTS
S
3.2 x 2.5 Ceramic SMD
Frequency
Stability
Operating
Temperature
10 = ±1.0 ppm
15 = ±1.5 ppm
20 = ±2.0 ppm
25 = ±2.5 ppm
30 = ±3.0 ppm
50 = ±5.0 ppm
A = 0°C to +50°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
Pin 1 Connection
Blank = Ground*
V = Voltage Control
Supply Voltage
3 = +3.0 VDC
2 = +2.8 VDC
Output
S = Clipped Sinewave
Packaging
T = Tape and Reel
Please Consult with MMD Sales Department for any other Parameters or Options
Mechanical Details
3.40 [.134]
MAX
0.90 [.035]
MAX
2.65 [.104]
2.24 [.088]
0.25 [.010]
0.51 [.020]
PIN CONNECTIONS
3
2
4
0.70 [.028]
PIN 1 VOLTAGE CONTROL
PIN 2 GND
MXX.X
SYWW
2.70 [.106]
MAX
PIN 3 OUTPUT
PIN 4 SUPPLY VOLTAGE
NOTE 1
1
IF VC OPTION IS NOT USED, THIS
PIN MUST BE GROUNDED OR
FREQUENCY WILL SHIFT.
1.20 [.047]
GROUND PLANE UNDER OSCILLATOR
0.30 [.012]
0.60 [.024]
0.83 [.033]
0.40 [.016]
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
Suggested
Land Pattern
Tape & Reel Dimensions
PITCH
4.00 [.157]
8.00 [.315]
180 [7.0]
PITCH
TAPE WIDTH
REEL DIA
16.00
REEL DIA
COUNT
1000
Q1
PIN 1 ORIENT.
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Revision:
09/01/10 J
Pg 2 of 2
Revisions only with customer approval
相关型号:
©2020 ICPDF网 联系我们和版权申明