MVUH3025PT-1.544MHZ [MMD]
HCMOS Output Clock Oscillator,;
| 型号： | MVUH3025PT-1.544MHZ |
| 厂家： | 
MMD COMPONENTS |
| 描述： | HCMOS Output Clock Oscillator, 机械 振荡器 |
| 文件： | 总2页 (文件大小：103K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MVUH Series – 5 x 3.2 VCXO Specification
¾ 5 X 3.2 SMT Package – 6 Pins
¾ HCMOS Output
¾ Tri-State Option
¾ Tape and Reel Packaging Available
ELECTRICAL SPECIFICATION:
Frequency Range
1.544MHZ to 77.760MHZ
Temperature Stability
(See Part Number Guide for Options)
Absolute Pull Range (APR) Inclusive of all conditions:
Calibration at +25ºC, Frequency Stability over the operating
temperature range, supply voltage change, output load
change, shock, and vibration
(See Part Number Guide for Options)
Aging at +25ºC
±2 ppm / 1st year typ
(See Part Number Guide for Options)
-55°C to +125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (Vdd) ±5%
Supply Current
+2.50 VDC
15mA max
+3.30 VDC
15mA max
Output
HCMOS
Logic “1”
Logic “0”
90% of Vdd min
10% of Vdd max
Symmetry (50% of waveform)
Load
Rise/Fall Time (20% to 80%)
RMS Phase Jitter (12kHZ to 20MHZ)
(See Part Number Guide for Options)
15pF max
5 nSec max
1pSec max
100 Hz
1 kHz
10 kHz
100 kHz
-95 dBc/Hz
-125 dBc/Hz
-142 dBc/Hz
-152 dBc/Hz
Phase Noise
Start-up Time
10mSec max
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% max or grounded to Disable Output (High Impedance)
Tri-state Operation
Control Voltage
Control Voltage Range
Slope
+0.30 VDC to 2.30 VDC
0.00 VDC to Vdd
Positive
+0.30 VDC to 3.30 VDC
PART NUMBER GUIDE:
Frequency
MVU
H
5 x 3.2 Ceramic SMD 6 Pads
Frequency
Stability
Operating
Pin 2 & 5 Connection
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Absolute Pull Range (APR)
D = ±50 ppm min
Blank = Pins 2 & 5 = N/C
H = Pin 2-Tri-state, Pin 5-N/C
R = Pin 2-N/C, Pin 5-Tri-state
T = Pins 2 & 5 = Tri-state
Supply Voltage
Symmetry
Blank = 40%/60%
A = 45%/55%
Linearity
Blank = ±20% max
Y = ±10% max
Packaging
Blank = Bulk
T = Tape and Reel
Output
P = ±80 ppm min: less than 51.814MHZ
C = ±100 ppm min: less than 36.000MHZ
2 = +2.50 VDC
3 = +3.30 VDC
H = HCMOS
Please Consult with MMD Sales Department for any other Parameters or Options
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Pb RoHS
Compliant
Free
In the event of conflict, the requirements of this specification shall govern
Specification Subject to change without notice
Revision:
MVUH111809B
Page 1 of 2
MECHANICAL DIMENSIONS:
2.54 [.100]
2.54 [.100]
5.15 [.203]
1.30 [.051]
1.27 [.050]
MAX
1.27 [.050]
PIN CONNECTIONS
VOLTAGE CONTROL
PIN 1
4
3
5
6
1
0.80 [.031]
PIN 2 TRI-STATE OR NO CONNECTION
MXX.XXX
SYYMML
3.35 [.132]
MAX
PIN 3
PIN 4
CASE GROUND
OUTPUT
PIN 5 TRI-STATE OR NO CONNECTION
PIN 6 SUPPLY VOLTAGE
1.00 [.039]
1.40 [.055]
1.00 [.039]
2
0.64 [.025]
PIN 1 DESIGNATOR LOCATED IN THIS AREA.
DIMENSION IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
RECOMMENDED
LAND PATTERN
ENVIRONMENTAL/MECHANICAL SPECIFICATION:
MARKING DETAIL:
Line 1 = MXX.XXX
Shock
Solderability
Vibration
Gross Leak Test
Fine Leak Test
Reflow Solder
MIL-STD-883, Meth 2002, Cond B
MIL-STD-883, Meth 2003
MIL-STD-883, Meth 2007, Cond A
MIL-STD-883, Meth 1014, Cond C
MIL-STD-883, Meth 1014, Cond A
+260ºC for 10 sec max
M
=
=
MMD COMPONENTS
Frequency in MHZ
XX.XXX
Line 2 = SYYMML
S
YYWW
L
=
=
=
Internal Code
4 Digit Date Code (Year / Week)
Denotes RoHS Compliant
Pin 1 Designator
TAPE AND REEL DIMENSIONS:
PITCH
TAPE WIDTH
REEL DIA
NOTES: UNLESS OTHERWISE SPECIFIED
8.0 [.315]
16.0 [.630]
178 [7 IN]
PITCH
TAPE WIDTH
REEL DIA
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inches].
3. Tolerances are ±0.1 [.004] unless otherwise specified.
4. Do not scale drawing.
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
QTY PER REEL
1000
Q1
PIN 1 ORIENT.
DIRECTION OF FEED
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Pb RoHS
Compliant
Free
In the event of conflict, the requirements of this specification shall govern
Specification Subject to change without notice
Revision:
MVUH111809B
Page 2 of 2
相关型号：
MVUMA100A
Trans Voltage Suppressor Diode, 500W, 100V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA100CA
Trans Voltage Suppressor Diode, 500W, 100V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA10A
Trans Voltage Suppressor Diode, 500W, 10V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA10CA
Trans Voltage Suppressor Diode, 500W, 10V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA110A
Trans Voltage Suppressor Diode, 500W, 110V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA110CA
Trans Voltage Suppressor Diode, 500W, 110V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA11A
Trans Voltage Suppressor Diode, 500W, 11V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA11CA
Trans Voltage Suppressor Diode, 500W, 11V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA120CA
Trans Voltage Suppressor Diode, 500W, 120V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA12CA
Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
MVUMA130A
Trans Voltage Suppressor Diode, 500W, 130V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, ULTRAMITE, 2 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明