105308-2105 [MOLEX]
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.;型号: | 105308-2105 |
厂家: | Molex |
描述: | The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below. |
文件: | 总3页 (文件大小:450K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Extractor Tool for Crimp Terminals
Extractor Tool
Application Tooling
Specification Sheet
Order No. 63824-4600
FEATURES
.
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit™ power connectors.
See below.
SCOPE
Products: Nano-Fit™ Power Connectors and Crimp Terminals 20-26 AWG.
Terminal
Terminal
Housing
Housing Order No.
Series No. Order No. Series No.
105307-1102 105307-1103 105307-1104 105307-1105 105307-1106
105307 105307-1107 105307-1108 105307-2101 105307-2103 105307-2104
105307-2105 105307-2106 105307-2107 105307-2108
105308-1102 105308-1103 105308-1104 105308-1105 105308-1106
105308 105308-1107 105308-1108 105308-2101 105308-2103 105308-2104
105308-2105 105308-2106 105308-2107 105308-2108
105300-1100
105300-1200
105300-1300
105300-2100
105300-2200
105300-2300
105300
20-26 AWG
Nano-Fit™
With TPA Feature
105307-1202 105307-1203 105307-1204 105307-1205 105307-1206
105307 105307-1207 105307-1208 105307-2202 105307-2203 105307-2204
105307-2205 105307-2206 105307-2207 105307-2208
105308-1202 105308-1203 105308-1204 105308-1205 105308-1206
105308 105308-1207 105308-1208 105308-2202 105308-2203 105308-2204
105308-2205 105308-2206 105308-2207 105308-2208
DESCRIPTION:
This extractor tool is 57.3 mm (2.26 in.) long by 6.35mm (.25 in.)
diameter, and weight about 0.03kg (1 oz.). See Figure 1.
44.5mm
1.75”
TPA Latch
57.3mm
2.26”
Before terminals can be extracted the TPA latch must be
opened first on Nano-Fit™ power connectors that have the TPA
feature see chart above.
Figure 1
1. Using a small screwdriver insert the flat edge under the tab
12.7mm
0.50”
of the TPA lock. See Figure 2.
2. Pull up and push out towards the crimped wire.
3. Repeat this on the opposite side of the TPA lock. The TPA lock should be removed completely from
the power connector.
Order No: ATS-638244600 Release Date: 06-18-15
Revision: A Revision Date: 06-18-15
UNCONTROLLED COPY
Page 1 of 3
Extractor Tool for Crimp Terminals
OPERATION:
NANO-FIT
CONNECTOR
TPA IN LOCKED
POSITION
When removing a damaged crimped
wire from the Nano-Fit™ power
connector follow the steps below:
CRIMPED
WIRE
1. Position the blade of the extraction
tool into the slot (in line with the
crimped terminal to be removed)
in the front face of the housing as
shown in Figure 3.
Figure 2
INSERT THE
SCREWDRIVER
UNDER THE TAB
WIRE
EXTRACTOR
TOOL
NANO-FIT
CONNECTOR
SLOT IN THE
CONNECTOR
Figure 3
2. Push the terminal forward in the arrow direction before using the Extractor Tool as shown in Figure 4.
3. Insert the Extractor Tool into the slot of the connector housing. Push extractor tool into the slot until it clicks or
comes to a stop. Do not force the extractor tool any farther, otherwise it may damage the housing.
4. Depress the terminal tang and push the terminal back through the connector slot.
TANG IN THE
TERMINAL
HOUSING
PUSH CRIMPED
WIRE
EXTRACTOR
TOOL
TERMINAL
Figure 4
Order No: ATS-638244600 Release Date: 06-18-15
UNCONTROLLED COPY
Page 2 of 3
Revision: A
Revision Date: 06-18-15
Extractor Tool for Crimp Terminals
5. Holding the extractor tool against the housing, gently pull the crimped wire out of the connector. See Figure 5.
NOTE:
When a terminal is removed in this manner the locking tangs are damaged and the terminal is not reusable.
CRIMPED WIRE
EXTRACTOR TOOL
NANO-FIT CONNECTOR
Figure 5
CAUTION: This extractor tool should be used to extract the terminal or seal cap only. Using it for unintended
purposes may cause injury or damage to parts. Be careful not to deform the end of the terminal. Avoid lifting the
housing lock too high.
CAUTION: Molex specifications are valid only when used with Molex terminals, applicators and tooling.
Molex does not offer repair parts for Extractor Tools due to the inexpensive nature of these tools.
Contact Information
For more information on Molex application tooling please contact your nearest Molex location shown below.
Visit our Web site at http://www.molex.com
Order No: ATS-638244600 Release Date: 06-18-15
Revision: A Revision Date: 06-18-15
UNCONTROLLED COPY
Page 3 of 3
相关型号:
105308-2106
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2107
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2108
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2202
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2203
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2204
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2205
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2206
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2207
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
105308-2208
The 63824-4600 Extraction Tool is designed to remove crimp terminals from Nano-Fit power connectors See below.
MOLEX
©2020 ICPDF网 联系我们和版权申明