86180-3201 [MOLEX]
Fiber Optic MT and MTP / MPO Cable Assemblies; 光纤MT和MTP / MPO光缆组件型号: | 86180-3201 |
厂家: | Molex |
描述: | Fiber Optic MT and MTP / MPO Cable Assemblies |
文件: | 总4页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Fiber Optic
MT and MTP / MPO Cable Assemblies
Features & Benefits
Applications
• Provides connectorized
interface for ribbon or
ribbonized fiber
• High density interconnects for:
- Telephony central office
and local loop
- Data communications
• Connector alignment is made
with precision alignment pins
• Fanouts to simplex fiber
connectors available
• Provides interconnect for
parallel optical transmitters
and receivers
• Low loss interconnect
• Push-pull mating of MTP* for
quick connections
• NTT compatible
• Consistent and repeatable
performance
Molex MT and MTP connectorized ribbon fiber cable assemblies provide reliable high performance interconnects of up to
12 fibers in a minimum footprint. The MT connectors utilize the precision molded NTT compatible ferrule that connects 4 to
12 fibers using bare ribbon or ruggedized ribbon cable. Alignment between mating ferrules is accomplished using 2
precision guide pins that are pre-installed in a designated male connector. Two holes in the female connector locate the pins
providing repeatable core to core alignment of the fibers. The MT ferrules are kept in the mated condition with the aid of a
spring clip.
The MTP assemblies utilize the same MT ferrules and package them in a push-pull keyed connector housing for quick and
easy connection using the MTP adapter. Guide pins in the male connector maintain alignment with holes in the female
connector while the adapter retains the connectors in the mated position.
Back reflection for singlemode assemblies is controlled by using an 8 degree angle polishing process. Fanouts to single
fiber leads connectorized with Molex industry standard SC, FC, and ST† connectors are available to interconnect with the
current installed base of transmitters, receivers and patch panels.
An "enhanced" version of the multifiber connector has been developed to provide a quick and reliable connection for multiple
optical fibers. The "enhanced" connector is a more precise NTT compatible ferrule, connecting the fibers using bare ribbon or
ruggedized ribbon cable. The "enhanced" version will incorporate the same footprint and alignment as the standard
MT/MTP.
This "enhanced" connector will solve customers needs for a high density solution with minimal insertion loss. The
"enhanced" MTP housing is yellow and the MT ferrule is keyed with a yellow line.
*MTP is a registered trademark of US Conec Ltd.
†ST, STII are trademarks of Lucent Technologies
Performance and Specifications
Characteristics
Units
Min.
Avg.
Max.
Comments
Insertion Loss:
9/125µm SM fiber
62.5/125µm MM fiber
Enhanced 9/125µm SM fiber
dB
dB
dB
-
-
-
.35
.3
.14
0.75
0.75
0.45
-
-
-
Return Loss:
Singlemode
Temperature Range
Durability
dB
ºC
-
-40
-
-
-
-
< 60
+80
Angle polish
40 cycles, 0.05 dB maximum change
1000 mate/unmate cycles
dB
<0.2
MOLEX FIBER OPTICS DIVISION 5224 Katrine Avenue, Downers Grove, IL 60515 / Tel: 800-A1-FIBER or (630) 512-8787 Web: www.molex.com/fiber
Fiber Optic
MT and MTP* / MPO Cable Assemblies
Mechanical Dimensions
MT Connector
ø.028
2X
FERRULE
ø.70
GUIDE PIN
BOOT
.0049
.125
12X
OPEN POSITION
.252
6.4
.181
4.6
.276
7.0
.138
3.5
SPRING CLIP
.0098
11X
.250
CLOSED POSITION
.098
2.5
FIBER
RIBBON
.236
6.0
.118
3.0
.315
8.0
.118
3.0
MTP Connector, 8 Degree
MTP Connector
8º
.028
0.7
.065
1.65
1.78
45.2
.181
4.6
.50
12.7
.30
7.6
MTP Adapter
.071
1.80
.158
4.00
.087
2.21
2x
+.008
.094
2.40
-.000
2x
+0.20
-0.00
+.020
-.004
.787±.004
.787
20.00
.591
.583
.984
+0.50
-0.10
20.00+0.10
14.81
25.00
15.00
+.020
-.004
.394
.811
.386
9.80
+0.50
-0.10
10.00
20.60
RECOMMENDED MOUNTING P ATTERN
INCHES
mm
All dimensions in
Fiber Optic
MT and MTP* / MPO Cable Assemblies
Ordering Guide
-
-
-
-
-
MX A AA AA A AA A A NNN A OOO A NNN
1. Optical Fiber
Breakout Length
End 2
(Dimension C)
2. Cable Construction
3. Connector Style End 1
4. Finish End 1
5. Connector Style End 2
6 Finish End 2
8. Breakout Style End 2
Length
(Dimension A)
7. Unit of
Measure
1. Optical Fiber
5. Connector Style End 2
6. Finish End 2
AA - ST† compatible, polymer coupling nut
AB - ST compatible, metal coupling nut
AC - ST compatible, 90º boot,
metal coupling nut
A - Multimode, ceramic ferrule, standard PC+
B - Multimode, ceramic ferrule, enhanced PC
C - Singlemode, RL > 45 dB, super PC
D - Singlemode, RL > 55 dB, ultra PC
E - Singlemode, RL > 70 dB, APC
F - Multimode, stainless steel
M - Flat
A - Multimode, 50/125µm
B - Multimode, 62.5/125µm
D - Singlemode, 9/125µm
BA - STII† compatible
DA - FDDI, black housing
DB - ESCON‡ compatible
EA - FC
EB - FC/APC, standard key
EC - FC/APC, tight fit key
FA - SC, standard
FB - SC, black housing, black boot
FC - SC, red housing, red boot
FD - SC, black housing, 90° black boot
FE - SC, red housing, 90° red boot
FF - SC/APC, green housing, green boot
FG - SC Duplex
2. Cable Construction
P - Angle (SM)
Q - "Enhanced" angle (SM)
Z - No connector (for End 2 only)
RA - Bare ribbon fiber, 4 fibers
RB - Bare ribbon fiber, 8 fibers
RC - Bare ribbon fiber, 10 fibers
RD - Bare ribbon fiber, 12 fibers
RE - Ribbon cable, OFNR, 4 fibers
RF - Ribbon cable, OFNR, 8 fibers
RG - Ribbon cable, OFNR, 10 fibers
RH - Ribbon cable, OFNR, 12 fibers
7. Unit of Measure*
*Numeric values must be
consistent
C - Centimeters
F - Feet
I - Inches
M - Meters
3. Connector Style End 1
MM - MT compatible, male
MF - MT compatible, female
PM - MTP/MPO compatible, male
PF - MTP/MPO compatible, female
GA - BSC
GB - BSC/APC
GC - BSCII
GD - BSCII/APC
Conversion Chart
From
meter
meter
to
inch
foot
Multiply by
39.37
3.281
HC - LC connector
MM - MT compatible, male
MF - MT compatible, female
PH - BMTP pin holder, male
PM - MTP/MPO compatible, male
PF - MTP/MPO compatible, female
ZZ - No connector (for End 2 only)
centimeter inch
meter centimeter
.394
100
4. Finish End 1
M - Flat
P - Angle (singlemode)
Q - "Enhanced" angle (singlemode)
8. Breakout Style End 2
A - No breakout
R - Ribbon to 900µm
†ST and STII are registered trademarks of Lucent Technologies
‡ESCON is a registered trademark of International Business Machines Corporation
Example 1
Example 2
Customer desires a 62.5/125µm 12 fiber ribbon
cable type OFNR jumper terminated with a male
MTP connector and 12 SC connectors. The
overall length is 20 meters with a break out
length of 0.5 meters using 900µm jacketed
fanout.
Customer desires a 62.5/125µm 8 fiber bare
ribbon jumper terminated with a male MT and a
female MT connector. The length is 3 feet.
Ordering Format:
MXBRH-PMM-FAB-M020-A000-R0.5
Ordering Format:
MXBRB-MMM-MFM-F003-A000-A000
Fiber Optic
MT and MTP* / MPO Cable Assemblies
Assembly Construction & Breakout Detail
MT to MT
A
MT to Simplex Fanout
A
MTP to MTP
A
MTP to Simplex Fanout
A
Standard Part Numbers
Order Number
86181-0000
Description
MTP adapter
86180-3001
86180-3201
86780-0010
MT spring clip (8 fibers or less)
MT spring clip (greater than 8 fibers)
MT spring fastener tool
86001-0095 Rev. 3
USA/30MFO/2000.09
©2000, Molex
Molex reserves the right to make any changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.
相关型号:
©2020 ICPDF网 联系我们和版权申明