FWDR37P [MOLEX]
D Subminiature Connector, 37 Contact(s), Male, Solder Terminal;型号: | FWDR37P |
厂家: | Molex |
描述: | D Subminiature Connector, 37 Contact(s), Male, Solder Terminal 连接器 |
文件: | 总8页 (文件大小:1604K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Wasserdichte Steckverbindersysteme
Waterproof connector systems
Bestellschlüssel für wasserdichte Steckverbinder
Ordering code for waterproof connectors
UL Recognized File No. E168813
Die Wasserdichtheit des Endsystems ist nicht Inhalt der UL-Prüfung.
The waterproofness of the end appliance is not content of the UL-inspection.
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
80
Technische Daten
Technical data
Mechanische Daten
Mechanical data
Mechanische Daten
Mechanical data
Schutzart / Protection standard
DIN 40050 - IP 67
3,4 N
0,2 N
-25 °C bis +70 °C
≤
Steckkraft pro Signalkontakt / Mating force per signal contact
Ziehkraft pro Signalkontakt / Unmating force per signal contact
Betriebstemperaturbereich
≥
Operating temperature range
-13 °F to +158 °F
Elektrische Daten
Electrical data
Elektrische Daten
Electrical data
Maximale Stromstärke
Current rating
5 A
Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse
Test voltage between 2 contacts / shell and contact
Erfüllt Übergangswiderstand pro Kontaktpaar nach DIN 41652 für
Meets transitional resistance requirements per contact pair, in accordance
with DIN 41652
1200 V / 1 min.
- gerade Kontakte / Straight contacts
- abgewinkelte Kontakte / Right angled contacts
- abgewinkelte Kontakte bei 50 Polen / Right angled contacts - 50 way
10 m
25 m
35 m
≤
≤
≤
Ω
Ω
Ω
Isolationswiderstand Kontakt / Kontakt
Insulation resistance between contacts
Spezifischer Durchgangswiderstand
Volume resistivity
5000 M
≥
Ω
1016 cm
Ω
Spezifische Durchschlagsfestigkeit
Dielectric strength
50 kV / mm
Materialien und Oberflächen
Materials and platings
Materialien und Oberflächen
Materials and platings
Gehäuse
Shell
Messing, verzinnt über Nickel
brass, tin plated over nickel
Isolierkörper und Kunststoffdichtrahmen
Insulator and plastic watertight frame
Metalldichtrahmen
Metal watertight frame
Kontaktmaterial
Thermoplast, glasfaserverstärkt (UL94V-0)
thermoplastic, glass filled (UL94V-0)
Zinkdruckguss, vernickelt
nickel plated zinc die-cast
Kupfer-Legierung
Contact material
Copper alloy
Kontakte
gedreht, Kupferlegierung, 0,8 µm Au über Nickel,
Anschlussbereich verzinnt
machined, copper alloy, 31 microinches Au over Ni,
termination area tin plated
Silikon
Machined contacts
Dichtelement
Waterproofing elements
silicone
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
81
Wasserdichte Steckverbinder mit Kunststoffdichtrahmen
Waterproof connectors with plastic watertight frames
Steckverbinder mit Löttopfanschluss, frontseitige Montage
Connectors with solder pot termination, front mounting
Steckverbinder mit Löttopfanschluss, max. AWG 20
Connectors with solder pot termination, max. AWG 20
Polzahl
A
B
Bestellnummer Stift Bestellnummer Buchse Innengewinde
Number of contacts
±0,2
±0,1
Order number pin
Order number socket
Inner thread
(±0.008) (±0.004)
4-40 UNC M3
40,0
(1.575)
48,3
(1.902)
62,0
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
Standard
standard
Standard
standard
Standard
standard
9
FWDF09P
FWDF15P
FWDF25P
FWDF09S
FWDF15S
FWDF25S
-K413
15
25
-K413
-K413
(2.441)
Steckverbinder mit Löttopfanschluss, rückseitige Montage
Connectors with solder pot termination, rear mounting
Steckverbinder mit Löttopfanschluss, max. AWG 20
Connectors with solder pot termination, max. AWG 20
Polzahl
A
B
Bestellnummer Stift Bestellnummer Buchse Innengewinde
Number of contacts
±0,2
±0,1
Order number pin
Order number socket
Inner thread
(±0.008) (±0.004)
4-40 UNC M3
40,0
(1.575)
48,3
(1.902)
62,0
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
Standard
standard
Standard
standard
Standard
standard
9
FWDR09P
FWDR15P
FWDR25P
FWDR09S
FWDR15S
FWDR25S
-K414
15
25
-K414
-K414
(2.441)
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
82
Wasserdichte Steckverbinder mit Kunststoffdichtrahmen
Waterproof connectors with plastic watertight frame
Steckverbinder mit geradem Leiterplattenanschluss
Connectors with straight PCB termination
Steckverbinder mit geradem Einlötanschluss, Ø 0,6, vorverzinnt
Connectors with straight PCB termination, (Ø 0.024), pre-tinned
Polzahl
A
B
Bestellnummer Stift Bestellnummer Buchse Innengewinde
Number of contacts
±0,2
±0,1
Order number pin
Order number socket
Inner thread
(±0.008) (±0.004)
4-40 UNC M3
40,0
(1.575)
48,3
(1.902)
62,0
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
Standard
standard
Standard
standard
Standard
standard
9
FWDR09P1
FWDR15P1
FWDR25P1
FWDR09S1
FWDR15S1
FWDR25S1
-K415
15
-K415
25
-K415
(2.441)
Leiterplattenlochbilder:
siehe Seite 18
PCB hole pattern: see page 18
Steckverbinder mit abgewinkeltem Leiterplattenanschluss
Connectors with right angled PCB terminations
Steckverbinder mit abgewinkeltem Einlötanschluss, Ø 0,6, vorverzinnt
Connectors with right angled PCB termination, (Ø 0.024), pre-tinned
Polzahl
A
B
Bestellnummer Stift Bestellnummer Buchse
Innengewinde
Number of contacts ±0,2
±0,1
Order number pin
Order number socket
Inner thread
(±0.008) (±0.004)
40,0 25,0
(1.575) (0.984)
48,3 33,3
(1.902) (1.311)
62,0 47,04
4-40 UNC
M3
Standard
standard
Standard
standard
Standard
standard
9
FWDR09P25
FWDR15P25
FWDR25P25
FWDR09S25
FWDR15S25
FWDR25S25
-K416
15
-K416
-K416
25
(2.441) (1.852)
Leiterplattenlochbilder:
siehe Seite 18
PCB hole pattern: see page 18
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
83
Wasserdichte Steckverbinder mit Metalldichtrahmen
Waterproof connectors with metal watertight frame
Steckverbinder mit Löttopfanschluss, frontseitige Montage
Connectors with solder pot termination, front mounting
Steckverbinder mit Löttopfanschluss, max. AWG 20
Connectors with solder pot termination, max. AWG 20
Polzahl
Number of contacts
A
±0,2
B
±0,1
C
±0,2
Bestellnummer Stift Bestellnummer Buchse
Innengewinde
Inner thread
4-40 UNC
Standard
standard
Standard
standard
Standard
standard
Standard
Auf Anfrage
On request
Order number pin
Order number socket
(±0.008) (±0.004) (±0.008)
M3
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,00
(0.827)
21,0
(0.827)
23,2
(0.913)
9
FWDFM09P
FWDFM15P
FWDFM25P
FWDFM37P
FWDFM50P
FWDFM09S
FWDFM15S
FWDFM25S
FWDFM37S
FWDFM50S
-K413
•
•
•
15
25
37
50
-K413
-K413
-K413
-K413
standard
Standard
standard
•
(2.996)
Steckverbinder mit Löttopfanschluss, rückseitige Montage
Connectors with solder pot termination, rear mounting
Steckverbinder mit Löttopfanschluss, max. AWG 20
Connectors with solder pot termination, max. AWG 20
Polzahl
Number of contacts
A
±0,2
B
±0,1
C
±0,2
Bestellnummer Stift Bestellnummer Buchse
Innengewinde
Inner thread
4-40 UNC
Standard
standard
Standard
standard
Standard
standard
Standard
Auf Anfrage
On request
Order number pin
Order number socket
(±0.008) (±0.004) (±0.008)
M3
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,00
(0.827)
21,0
(0.827)
23,2
(0.913)
9
FWDRM09P
FWDRM15P
FWDRM25P
FWDRM37P
FWDRM50P
FWDRM09S
FWDRM15S
FWDRM25S
FWDRM37S
FWDRM50S
-K414
-K414
-K414
-K414
-K414
•
15
25
37
50
standard
Standard
standard
(2.996)
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
84
Wasserdichte Steckverbinder mit Metalldichtrahmen
Waterproof connectors with metal watertight frame
Steckverbinder mit geradem Leiterplattenanschluss
Connectors with straight PCB termination
Steckverbinder mit geradem Einlötanschluss, Ø 0,6, vorverzinnt
Connectors with straight PCB termination, (Ø 0.024), pre-tinned
Polzahl
Number of contacts
A
±0,2
B
±0,1
C
±0,2
Bestellnummer Stift Bestellnummer Buchse
Innengewinde
Inner thread
4-40 UNC
Standard
standard
Standard
standard
Standard
standard
Standard
Auf Anfrage
On request
Order number pin
Order number socket
(±0.008) (±0.004) (±0.008)
M3
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,00
(0.827)
21,0
(0.827)
23,2
(0.913)
9
FWDRM09P1
FWDRM15P1
FWDRM25P1
FWDRM37P1
FWDRM50P1
FWDRM09S1
FWDRM15S1
FWDRM25S1
FWDRM37S1
FWDRM50S1
-K415
•
15
25
37
-K415
-K415
-K415
-K415
standard
Standard
standard
50
(2.996)
Leiterplattenlochbilder:
siehe Seite 18
PCB hole pattern: see page 18
Steckverbinder mit abgewinkeltem Leiterplattenanschluss
Connectors with right angled PCB terminations
Steckverbinder mit abgewinkeltem Einlötanschluss, Ø 0,6, vorverzinnt
Connectors with right angled PCB termination, (Ø 0.024), pre-tinned
Polzahl
A
B
C
D
E
Bestellnummer Stift Bestellnummer Buchse Innengewinde Auf Anfrage
Number of contacts
±0,2
±0,1
±0,2
±0,1
±0,2
Order number pin
Order number socket
Inner thread
On request
(±0.008) (±0.004) (±0.008) (±0.004) (±0.008)
4-40 UNC M3
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,0
(0.827)
21,0
(0.827)
23,2
7,3
(0.287)
7,3
(0.287)
7,3
(0.287)
7,3
(0.287)
8,8
11,6
(0.457)
11,6
(0.457)
11,6
(0.457)
11,6
(0.457)
12,84
(0.506)
Standard
standard
Standard
standard
Standard
standard
Standard
standard
9
FWDRM09P25
FWDRM15P25
FWDRM25P25
FWDRM37P25
FWDRM50P5
FWDRM09S25
FWDRM15S25
FWDRM25S25
FWDRM37S25
FWDRM50S5
-K416
•
•
15
25
37
50
-K416
-K416
-K416
•
•
Standard
standard
-K416
(2.996)
(0.913)
(0.346)
Leiterplattenlochbilder:
siehe Seite 18
PCB hole pattern: see page 18
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
85
Frontseitige Montage
Front mounting
Abbildung:
Montage auf der Geräteaußenseite bei Typ
FWDF09S (siehe auch Seite 11).
Illustration:
Mounting on the outer side of a machine with
type FWDF09S (Please also see page 11).
O-Ring mit Dichtrahmen
verklebt
O-ring glued to frame
Metalldichtrahmen FWDFM
Metal watertight frame FWDFM
Rückseitige Montage
Rear mounting
Abbildung und Zeichnung:
O-Ring am Dichtrahmen verklebt
O-ring glued onto frame
Metalldichtrahmen FWDRM
Metal watertight frame FWDRM
Montage auf der Geräteinnenseite bei Typ
FWDR09S (siehe auch Seite 11).
Illustration and drawing:
Mounting on the inside of a machine with type
FWDR09S (Please also see page 11).
Frontplatte
Front panel
Lieferbare Abstandsbolzen
Distance bolts available
Innen- und Außengewinde Bestellnummer
Abstandsbolzen (für Gehäusewandstärke 1,5 mm; bei geringerer Stärke sind
Unterlegscheiben notwendig, die im Lieferumfang enthalten sind.)
Spacer
(for shell thickness 0.059 “; with thinner front panel, washers are
required, which are included in the delivery.)
Inner and outer thread
Order number
F-GSCH1/5-K834
F-GSCH1/5-K835
M3
4-40 UNC
Modifikationen wasserdichte Steckverbinder
Modifications waterproof connectors
Modifikationen
Bestellnummernergänzung
Bestellbeispiel
Modifications
Additon to order no.
Order example
steckseitig
mating side
4-40
lötseitig
solder side
M3
M3
4-40
4-40
K577
——
FWDF09S-K577
FWDF09S1
4-40
4-40
4-40
4-40
4-40
M3
M3
Lötöse
Solder eyelet
Lötöse
Solder eyelet
K708
K709
K1063
FWDR09P-K708
FWDR09P-K709
FWDR09S-K1063
Alle Steckverbinder der Baureihe FWD mit montierten Frontdichtungen F1043
All connectors in the FWD series are assembled with front gaskets F1043
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
86
Bestelldaten (wasserdichte D-Sub Steckverbinder für Hauben FWH)
Ordering data (waterproof D-Sub connectors for hoods FWH)
Stiftsteckverbinder
Buchsensteckverbinder
Pin connector
Socket connector
Bestellnummer Gehäusegröße
Polzahl
Bestellnummer Gehäusegröße
Polzahl
Order number
Shell size
Number of contacts
Order number
Shell size
Number of contacts
F09P-K700
1
9
F09S-K700
F15S-K700
F25S-K700
F37S-K700
F50S-K700
1
9
F15P-K700
F25P-K700
F37P-K700
F50P-K700
2
3
4
5
15
25
37
50
2
3
4
5
15
25
37
50
Verpackungseinheit
Packing unit
Modifikation ...K701
2 St. Verriegelungsschrauben
2 St. Unterlegscheiben
Modification ...K701
2 locking screws
2 washers
1 St. Frontdichtung
2 St. Abstandsbolzen
1 front seal
2 distance bolts
Information / Information:
Informationen zur Haube FWH
entnehmen Sie bitte unserem
Haubenkatalog.
For information on FWH hoods,
please refer to our hoods
catalogue.
Die D-Sub Stift- und Buchsensteckverbinder für
wasserdichte Hauben sind nur mit Löttopf-
anschluss verfügbar.
D-Sub pin and socket connectors for waterproof
hoods are only available for solder pot
terminations.
Zubehör für Stiftsteckverbinder
Accessories for pin connectors
Frontdichtung
Front seal
Bestellnummer Gehäusegröße
Polzahl
Materialbeschreibung
Order number
Shell size
Number of contacts
Material specification
Werkstoff
Material
Dicke
Silikon
silicone
0,8
F1043-1
1
9
F1043-2
F1043-3
F1043-4
F1043-5
2
3
4
5
15
25
37
50
Thickness
(0.031)
Frontdichtungen dienen zur Abdichtung des Steckbereiches der Signalkontakte (Kombination FWD... mit D-Sub Steckverbindern ...-K700) und werden im
Stiftstecker montiert (siehe Zeichnung). Sie sind auch mit Standard D-Sub Steckverbindern verwendbar.
Front seals are used to seal off the connection area of the signal contacts (combination FWD... with D-Sub connectors ...-K700) and are mounted in male
connectors (see drawing). They can also be used with standard D-Sub connectors.
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
87
相关型号:
©2020 ICPDF网 联系我们和版权申明