IE1212S-1W [MORNSUN]
Analog Circuit;型号: | IE1212S-1W |
厂家: | MORNSUN SCIENCE& TECHNOLOGY LTD. |
描述: | Analog Circuit |
文件: | 总2页 (文件大小:134K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IE_S-1W Series
FIXED INPUT ISOLATED & REGULATED
1W OUTPUT
DUAL OUTPUT
RoHS
multi-country patent protection
FEATURES
● Dual Output
● Small Footprint
● SIP Package Styles
● Industry Standard Pinout
● UL94-V0 Package
PRODUCT PROGRAM
Input
Output
Part
Number
Efficiency Package
Voltage (VDC)
Current (mA)
Voltage
(VDC)
(%, Typ)
Style
Nominal
Range
Max
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
Min
±10
±6
IE0505S-1W
IE0509S-1W
IE0512S-1W
IE0515S-1W
IE1205S-1W
IE1209S-1W
IE1212S-1W
IE1215S-1W
IE2405S-1W
IE2409S-1W
IE2412S-1W
IE2415S-1W
5
4.75~5.25
4.75~5.25
4.75~5.25
4.75~5.25
11.4~12.6
11.4~12.6
11.4~12.6
11.4~12.6
22.8~25.2
22.8~25.2
22.8~25.2
22.8~25.2
±5
±9
69
70
72
72
70
72
73
73
72
72
73
73
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
5
● No Heat Sink Required
● 3KVDC Isolation
5
±12
±15
±5
±5
● Power Density 0.85W/cm3
● Temperature Range: -40°C~+85°C
● No External Component Required
● RoHS Compliance
5
±4
12
12
12
12
24
24
24
24
±10
±6
±9
±12
±15
±5
±5
±4
±10
±6
±9
APPLICATIONS
±12
±15
±5
The IE_S-1W Series are specially designed
for applications where a group of polar
power supplies are isolated from the input
power supply in a distributed power supply
system on a circuit board.
These products apply to:
1) Where the voltage of the input power
supply is fixed (voltage variation ≤±5%);
2) Where isolation is necessary between
±4
COMMON SPECIFICATIONS
Short circuit protection
Temperature rise at full load
Cooling
1 second
25°C MAX, 15°C TYP
Free air convection
input
and
output
(isolation
voltage
Operating temperature range
Storage temperature range
Lead temperature
Storage humidity range
Case material
-40°C~+85°C
=3000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are demanded.
These products don’t apply to:
1) Where the input supply voltage varied
(variation≥±5%), otherwise our company’s
WRA series is recommended;
-55°C ~+125°C
300°C (1.5mm from case for 10 seconds)
≤ 95%
Plastic (UL94-V0)
MTBF
>3,500,000 hours
2) Where the isolation voltage between input
and output is required to be>3000VDC,
otherwise our company’s IG_S(D)-1W Series
of products are recommended;
ISOLATION SPECIFICATIONS
Item
Test conditions
Min
Typ
Max
Units
VDC
MΩ
3) When the actual output power is less than
0.25w,
the
IE_S-0.25W
series
are
Isolation voltage
Isolation resistance
Tested for 1 minute
Test at 500VDC
3000
1000
recommended.
MODEL SELECTION
OUTPUT SPECIFICATIONS
Item
Test conditions
MIN TYP
0.1
MAX
1
Units
W
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
Output power
Line regulation
0.25
1
%
For Vin change of ±5%
10% to 100% full load
100% full load
Load regulation
Output voltage accuracy
Temperature drift
Output ripple
%
±3
%
100% full load
0.03
15
%/°C
mVp-p
20MHz Bandwidth
Full load, nominal input
10
Switching frequency
100
KHz
MORNSUN Science& Technology Ltd.
Address: 8th floor 8th building, Hangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Note:
1.All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless
otherwise specified.
2.See below recommended circuits for more details.
Fax: 86-20-38601272
http://www.mornsun-power.com
MORNSUN reserves the copyright
Edition: A NOV-2005
Page 1 of 2
TYPICAL CHARACTERISTICS
Temperature Derating Graph
L
L
L
+Vo
0V
Vin
C
C
C
DC DC
GND
-Vo
<Figure 1>
Operating Temp.(
C )
PIN CONNECTIONS
Pin
Vin
GND
+Vo
-Vo
1
2
7
9
10
Overload Protection
0V
Under normal operating conditions, the
output circuit of these products has no
protection against over-current and
short-circuits. The simplest method is to
connect a self-recovery fuse in series at
the input end or add a circuit breaker to the
circuit.
1 2
7 9 10
OUTLINE DIMENSIONS& RECONMENDED FOOTPRINT DETAILS
Side View
Bottom View
External Capacitor Table
External
capacitor
External
capacitor
Vin
Vout
5VDC
12VDC
24VDC
--
4.7uF
2.2uF
1uF
--
5VDC
9VDC
4.7uF
2.2uF
1uF
10
9
1
2
7
12VDC
15VDC
0.47uF
Note: All Pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm.
APPLICATION NOTE
Filtering
In some circuits which are sensitive to noise and ripple, a filtering capacitor
may be added to the DC/DC output end and input end to reduce the noise and
ripple. However, the capacitance of the output filter capacitor must proper. If
the capacitance is too big, a startup problem might arise. For every channel of
output, providing the safe and reliable operation is ensured, the greatest
capacitance of its filter capacitor refer to the External Capacitor Table. To get
an extreme low ripple, an “LC” filtering network may be connected to the input
and output ends of the DC/DC converter, which may produce a more
significant filtering effect. It should also be noted that the inductance and the
frequency of the “LC” filtering network should be staggered with the DC/DC
frequency to avoid mutual interference (see figure 1).
Requirement on output load
To ensure this module can operate efficiently and reliably, a minimum load is
specified for this kind of DC/DC converter in addition to a maximum load
(namely full load). During operation, make sure the specified range of input
voltage is not exceeded, the minimum output load is not less than 10% of the
full load, that this product should never be operated under no load! If the actual
output power is very small, please connect a resistor with proper resistance at
the output end in parallel to increase the load, or use our company’s products
with a lower rated output power (IE_S -0.25W series).
MORNSUN Science& Technology Ltd.
Address: 8th floor 8th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax: 86-20-38601272
Http: //www.mornsun-power.com
MORNSUN reserves the copyright
Edition: A NOV-2005
Page 2 of 2
相关型号:
©2020 ICPDF网 联系我们和版权申明