T6233B [MORNSUN]

Active Single channel Analog signal Isolation barrier; 有源单路模拟信号隔离安全栅


型号：	T6233B
厂家：	MORNSUN SCIENCE& TECHNOLOGY LTD.
描述：	Active Single channel Analog signal Isolation barrier 有源单路模拟信号隔离安全栅栅
文件：	总2页 (文件大小：68K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Active Single channel Analog signal

Isolation barrier (Vin & Iout)

T51/52/61/62_B

APPLICATIONS

PRODUCT PROGRAM

Part

Number

Isolation

Power Output

Analog signal isolating barrier, is

a signal

Power Supply

Input

Output

Channels

conditioner with electrical insulation between input

and output, which can receive the standard or

non-standard analog signal input from the scene,

and transmit a standard output signal to the

control room or DCS, to get three-port isolated

among power supply, input and output. It is

designed for translating signals of apparatus in

hazardous area, isolating and transforming these

signals into standard signals which can be

accepted by industry computer, DCS, PLC, or

user-specified special signals. It is widely used in

the industrial measurement systems, medical

electronic equipment, electrical equipment etc.

We adopt high efficiency magnetism and

electricity isolated technology to achieve signal

isolation, with characteristics of high output

accuracy, good linearity and low temperature drift.

T5230B

T5130B

T6135B

T6230B

T6233B

T6235B

24V

0-10V

0-5V

0-20mA

4-20mA

0-20mA

NONE

12V

NONE

24V

12V

Note: We could also offer customer design for special input and output.

ELECTRICAL CHARACTERISTICS

Power Supply

Power Dissipation

Power Protection

Output Voltage

Output Current

Input Signal

(Nominal Power Supply)±5%

Power Supply

Data

≤2W

Reverse protection

(Nominal)±10%

≤25mA

Isolation Power

Output Data

See above

≥10MΩ

Input Data

Input Impedance

Overload

≤15V

FEATURES

● Three port Isolation(input, output, power supply)

Output Signal

Load

See above

Output Data

● High accuracy (0.1% F.S.)

≤500Ω（At Output =20mA）

● High linearity (0.1% F.S.)

● Isolation voltage(2500VDC/60S)

● High frequency response(15KHz)

● Low temperature drift(35PPM/℃)

● Industry class(Operation temp.: -25℃ to +71℃)

● High reliability(MTBF＞500,000 hours)

TRANSMISSION CHARACTERISTICS

Offset

0.1%F.S.

Gain Error

Temperature Drift

0.1%F.S.

0.0035%F.S./℃ (-25℃ to +71℃)

ISOLATION CHARACTERISTICS

Galvanic Isolation

Three port Isolation(input, output, power supply)

MODEL SELECTION

TXXXXB

Isolation Voltage

2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)

Insulation

100MΩ，500VDC(Among signal input ,signal output, power supply

Resistance

and isolation power output)

Package style

Isolation power output

Power supply

Output

OTHER CHARACTERISTICS

Operation temperature:-25℃ to +71℃

Input

Ambient

Isolation amplifier

temperature

Transport and Storage temperature:-50℃ to +105℃

35mm DIN-rail package

Package

Safety Class

EMC compliance

Weight

IP20(IEC60529 / EN60529)

GB/T 18268(IEC61326-1)

About 60g

MORNSUN Science & Technology co.,Ltd.

Address: 2th floor 6th building, Huangzhou Industrial

District, Guangzhou, China

Application

environment

No dusts, gases of fiercely vibration, impulsion or gases that may

erode to the components surrounded

Tel: 86-20-38601850

Fax:86-20-38601272

Http://www.mornsun-power.com

Note:

1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output

load unless otherwise specified.

2. Only typical models listed, specifications of custom product may be different. Please contact our

service people directly for certain conditions.

The copyright and authority for the interpretation of the products are reserved by Mornsun

Specifications subject to change without notice.

T51/52/61/62_B A/1-2008 Page 1 of 2

SINGLE CHANNEL SCHEMATIC DIAGRAM

CONNECTION

1. Cross section area of wiring: 0.5mm²-2.5 mm²;

2. Multi-strand wire, the length of bare wire is

about 8mm, fixed by the M4 bolt.

Power supply

1－

Isolation

power output

Application Note

Input

Output

1. Please read the user manual carefully before

using. If any questions please contact our

technical support department.

APPLICATION CIRCUIT DIAGRAM

2. Please do not use this product in hazardous

area.

1(-)

5(-)

3. The power supply of this product should be DC

power source. It is forbidden to use 220VAC

power supply.

Power supply

Output

Input

2(+)

3(-)

6(+)

4. To avoid equipment invalidation, or any failure,

users’ disassembling this product is forbidden.

7(-)

Isolation

power output

4(+)

8(+)

AFTER SERVICE

1. Products are carefully inspected and

controlled before going out from our factory. If

they operated abnormally or there were

anything wrong in the inner parts, please

contact with our agents near you or technical

support in our company as soon as possible.

2. 3 years warranty since the delivery date.

During the period of quality guarantee, our

company will repair or change free of charge if

product has any quality problem in the process

of normally using.

PACKAGING SIZE AND TERMINAL DESCRIPTION

Power supply-

1－

2＋

3－

4＋

5－

6＋

7－

8＋

Power supply+

Output-

MORNSUN

Output+

Input-

Input+

Isolation power output-

Isolation power output+

Unit: mm

Tolerance:±0.5

INSTALLATION

DISASSEMBLY

DIN35mm standard rail installation

1. Use a screwdriver (Width of edge≤6mm),

cut in the metal card lock from the

underside;

1. Upside of the instrument card in the

rail;

2. Push underside of the instrument into

the rail.

2. Boost up the screwdriver and prize the

metal card lock downwards;

3. Pull the instrument out of the rail.

The copyright and authority for the interpretation of the products are reserved by Mornsun

Specifications subject to change without notice.

T51/52/61/62_B

A/1-2008

Page 2 of 2

相关型号：