TDH301D485H [MORNSUN]
Industrial Bus;型号: | TDH301D485H |
厂家: | MORNSUN SCIENCE& TECHNOLOGY LTD. |
描述: | Industrial Bus |
文件: | 总4页 (文件大小:478K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Industrial Bus
TDHx01D485H Series
single high speed high isolation
RS485 isolation transceiver module
FEATURES
Two-terminal isolation ( input and output are
mutually isolated)
Integrated Isolated DC/DC converter
Bus protection
Isolation voltage :3.75KVAC
Operating temperature range:-40℃~+105℃
Baud rate 115200bps
Connect up to 32 nodes on one bus
PART NUMBER SYSTEM
TDHx01D485H
Rate
Interface signal type
Package
Serial Number
Isolation power output
Power input
Isolation voltage
Single Type
TDH301D485H/TDH501D485H series are transceiver isolation module with integrated power isolation, electrical isolation, and RS485 interface
bus protector; The traditional isolation RS485 circuits uses a piece of power isolation module, three optocouplers and RS485 transceiver chip
to realize the application. Now only a RS485 transceiver module can realize the functions. Simplify the customers on the isolation
requirements of the design; Products can be easily embedded in the user equipment, achieve function of RS485 network connection.
Selection Guide
Part No.
Power Supply input (VDC)
3.17~3.45
TDH301D485H
TDH501D485H
4.75~5.25
Input Specifications
Item
Operating Conditions
Value
≤50mA
TDH301D485H
TDH501D485H
TDH301D485H
TDH501D485H
Products energized,
no communication
Static current
Send current
≤40mA
Power Input
≤100mA
115200bps Square wave
communication
≤80mA
TD301D485H
TD501D485H
Compatible with + 3.3 V UART interface
Compatible with + 5 V UART interface
ITXD≤2mA; IRXD≤2mA; ICON≤5mA
Serial interface
Pin current
Single Input
Bus Interface
Item
Operating Conditions
Value
Standard interface RS485, pull-up and pull-down resistor, whose
value is 5.1K, have been set to A/B line.
Output
RS485 bus interface
Transmission Specifications
Item
Operating Conditions
Value
Data Rate
115200bps (max.)
The delay time from the receiving data switch to the send data:
30µs (min.), 100µs (max.).
Transceiver Switching Delay
The Number of Nodes
Transceiver control
Connect up to 32 nodes on one bus
Contrary to common RS485 transceiver control level
Control
Input
TXD
1
Output
CON
A
1
B
0
1
Line state
Normal
Truth Table
Sending Status
0
0
0
0
Normal
2015.05.21-A/1
Page 1 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Industrial Bus
TDHx01D485H Series
Control
Input
A-B
Output
CON
RXD
1
Truth Table
Receiving Status
≥0.2V
≤-0.2V
1
1
0
General Specifications
Item
Operating Conditions
Value
Electric Isolation
Two-terminal isolation (input and output are mutually isolated)
testing for 1 minute, leakage current
<5mA, humidity <95%
Degree of Isolation
3.75KVAC
-40℃~ +85℃
-55 ~ +105℃
10% ~ 90%
25℃ (Typ.)
Operating Temperature
Transportation and Storage
Temperature
Operating Humidity
Max. Operating Temperature
for casing
Ta=25℃
The presence of dust, fierce vibration, impulsion and corrosive
gas may cause damage to the product
Application Environment
Physical Specifications
Casing Material
Package
Black flame-retardant heat-proof plastic
DIP10
Weight
4.0g(Typ.)
Free convection
Cooling Method
EMC Specifications
CLASS A (see 2-② for recommended circuit)
CE
CISPR22/EN55022
EMI
CLASS A (see 2-② for recommended circuit)
RE
CISPR22/EN55022
IEC/EN61000-4-2
IEC/EN61000-4-4
IEC/EN61000-4-4
ESD
Contact ±4KV
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria B
(see 2-① for recommended circuit)
(see 2-③ for recommended circuit)
(see 2-
① for recommended circuit)
Power supply port ±2KV
Signal port ±1KV
EFT
Power supply port ±1KV
Signal port ±0.25KV/±0.5KV
Signal port ±0.5KV/±1KV
Signal port ±1KV/±2KV
Signal port ±2KV/±4KV
Signal port ±4KV/±6KV
(see 2-③ for recommended circuit)
(see 2-③ for recommended circuit)
EMS
Surge
IEC/EN61000-4-5
(see 2-
③ for recommended circuit)
(see 2-③ for recommended circuit)
(see 2-③ for recommended circuit)
Application Precautions
1. Please read the technical manual carefully before use; contact our technical support if you have any problem.
2. Do not use the product in hazardous areas.
3. Use DC power supply for the product and 220V AC power supply is prohibited.
4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment.
After-sales service
1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility
of failure of internal module, please contact the local representative or our technical support.
2. The warranty period for the product is 3 years as calculated from the date of delivery. If any quality problem occurs under normal use
within the warranty period, the product can be repaired or changed for free.
Applied circuit
Please refer to Isolated Transmitter application notes.
2015.05.21-A/1
Page 2 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Industrial Bus
TDHx01D485H Series
Design Reference
1.Typical application
+5V
VCC
DC/DC
0.1UF
VCC
1
2
10
9
RS485EEN
DI
RGND
VCC
GND
TXD
MCU
GND
TXD
A
B
6N137
3
8
TXD
A
B
4
5
DE
RE
RXD
RXD
CON
485 Bus
CON
6N137
CON
RO
VCC
+5V
RXD
MCU
6N137
New Circuit
Conventional Circuit
Fig. 1
2. EMC solution-recommended circuit
R1
④
C4
L1
①
②
R2
R4
A1
GDT2
GDT3
C5
C6
TVS2
10
9
1
VCC
GND
TXD
RGND
+
2
3
TVS4
R5
GDT1
A
B
C3
C2
TVS1 C1
R3
8
TVS3
B1
4
5
RXD
③
CON
Fig. 2
Recommended external circuit parameters:
Model
TD301D485H/TD501D485H
±0.5KV/±1KV ±1KV/±2KV
220uF/10V(Electrolytic capacitor)
±0.25KV/±0.5KV
±2KV/±4KV
±4KV/±6KV
C1
220uF/10V(Electrolytic capacitor)
TVS1
SMCJ5.0A (TD301D485H) / SMCJ6.5A(TD501D485H)
C2/C3
1uF/50V
10μH
1uF/50V
10μH
L1
C5/C6
100pF/100V
1nF/2KV
1MΩ
100pF/100V
1nF/2KV
1MΩ
C4
R1
TVS2/TVS3/TVS4
SMBJ15CA
SMBJ15CA
10Ω/2W(Wire-
10Ω/2W(Wire-
wound resistor)
10Ω/2W(Wire-
wound resistor)
R4/R5
--
--
wound
resistor)
10Ω/1W(Wire-
wound resistor)
10Ω/2W(Wire-
wound resistor)
R2/R3
--
--
--
GDT1/GDT2/GDT3
--
--
G30-A90X
S30-A90X
S50-A90X
Notes:
1.
GDT1, GDT2 and GDT3 be used instead of a three terminal gas discharge tube, GDT4, GDT5 and GDT6 empathy. Such
as GDT1, GDT2 and GDT3 three two-terminal device available gas discharge tube instead of a three-terminal at "± 4KV
/ ± 6KV" hierarchy, GDT4, GDT5 and GDT6 empathy, as B3D090L-C.
2.
It is not needed the component when parameter with the symbol of "--".
3. For more information please find the application notes on www.mornsun-power.com
2015.05.21-A/1
Page 3 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Industrial Bus
TDHx01D485H Series
Dimensions and Recommended Layout
Notes:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing
bag number: 58220015;
2. If the customers using the product for wave soldering, recommended don’t open hole on the bottom of the product coverage of PCB
board, to avoid the product base thermal deformation;
3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75% with nominal
input voltage and rated output load;
4. All index testing methods in this datasheet are based on our Company’s corporate standards;
5. The performance indexes of the product models listed in this datasheet are as above, but some indexes of non-standard model
products will exceed the above-mentioned requirements, and please directly contact our technician for specific information;
6. We can provide product customization service;
7. Specifications of this product are subject to changes without prior notice.
Mornsun Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: info@mornsun.cn
2015.05.21-A/1
Page 4 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
相关型号:
©2020 ICPDF网 联系我们和版权申明