URB4824LD-30WR3 [MORNSUN]
DC/DC converter;型号: | URB4824LD-30WR3 |
厂家: | MORNSUN SCIENCE& TECHNOLOGY LTD. |
描述: | DC/DC converter |
文件: | 总8页 (文件大小:3342K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converter
URB_LD-30WR3 Series
30W,Ultra wide input isolated & regulated dual /
single output DC/DC converter
FEATURES
Wide range of input voltage (4:1)
Efficiency up to 90%
No-load power consumption as low as 0.14W
Isolation voltage :1500VDC
Input under-voltage protection, output short
circuit protection, over-voltage protection,
Over-current protection
Operating temperature range: -40℃ to +75℃
Meet CISPR22/EN55022 CLASS A
Six-sided metal shielding package
A2S (wring mounting) and A4S (35mm rail
mounting) products featuring anti-reverse
connection for input
IEC60950, UL60950, EN60950 Approval
CB
Patent Protection RoHS
URB_LD-30WR3 series are isolated 30W DC-DC products with 4:1 input voltage. They feature efficiency up to 90%, 1500VDC isolation,
operating temperature of -40 ℃ ~+75 ℃ , Input under-voltage protection, output short circuit protection, over-voltage protection,
over-current protection and EMI meets CISPR22/EN55022 CLASS A, which make them widely applied in data transmission device, battery
power supply device, tele-comunication device, distributed power supply system, remote control system, industrial robot fields. And
extension package A2S and A4S also enable them with reverse voltage protection.
Selection Guide
③
Input Voltage (VDC)
Output
Output Current
Max.
Capacitive
Load(µF)
Efficiency
(%,Min./Typ.)
@ Full Load
①
Certification
Part No.
Nominal
Output Voltage
(VDC)
②
Max.
(mA)(Max./Min.)
(Range)
URB2403LD-30WR3
3.3
6000/0
83/85
10000
URB2405LD-30WR3
URB2409LD-30WR3
URB2412LD-30WR3
URB2415LD-30WR3
URB2424LD-30WR3
URB4803LD-30WR3
URB4805LD-30WR3
URB4812LD-30WR3
URB4815LD-30WR3
URB4824LD-30WR3
5
9
6000/0
3333/0
2500/0
2000/0
1250/0
6000/0
6000/0
2500/0
2000/0
1250/0
86/88
86/88
88/90
88/90
88/90
85/87
86/88
87/89
87/89
87/89
10000
4700
2700
1680
680
24
(9-36)
40
12
15
24
3.3
5
UL/CE/CB
10000
10000
2700
1680
680
48
(18-75)
12
15
24
80
Notes:①Series with suffix “H” are heat sink mounting; series with suffix “A2S” are chassis mounting,with suffix “A4S” are DIN-Rail mounting, for example
URB2405LD-30WHR3A2S is chassis mounting of with heat sink,URB2405LD-30WR3A4S is DIN-Rail mounting of without heat sink; If the application has a
higher requirement for heat dissipation, you can choose modules with heat sink;
②Absolute maximum rating without damage on the converter, but it isn't recommended;
③Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection,
minimum efficiency greater than Min.-2 is qualified.
Input Specifications
Item
Operating Conditions
3.3V output
Min.
--
Typ.
Max.
993/80
1453/80
1420/9
485/23
726/25
718/8
Unit
mA
970/60
1420/60
1388/6
474/20
710/20
702/5
24VDC input
5V output
Others
--
--
Input Current (full load / no-load)
3.3V output
5V output
Others
--
48VDC input
--
--
2015.08.12-A/2
Page 1 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
Reflected Ripple Current
--
-0.7
-0.7
--
40
--
--
50
100
9
mA
24VDC input
Input impulse Voltage (1sec. max.)
48VDC input
--
24VDC input
--
Starting Voltage
VDC
48VDC input
--
--
18
--
24VDC input
6.5
15.5
10
5.5
14.0
--
Output Short circuit Protection
48VDC input
--
Starting Time
Input Filter
Nominal input & constant resistance load
ms
--
Pi filter
Unavailable
Hot Plug
Module switch on
Ctrl suspended or connected to TTL high level (3.5-12VDC)
Ctrl pin connected to GND or low level (0-1.2VDC)
Module switch off
Ctrl*
Input current when switched off
--
5
8
mA
Note: *The voltage of Ctrl pin is relative to input pin GND.
Output Specifications
Item
Operating Conditions
Min.
--
Typ.
±1
Max.
Unit
Positive Output Voltage Accuracy
±3
Full load, the input voltage is from low voltage
to high voltage
%
Line Regulation
--
±0.2
±0.5
Load Regulation
0% to 100% load
--
--
--
--
--
--
±0.5
300
±5
±1
500
±8
Transient Recovery Time
µs
%
25% load step change
Full load
3.3V/5V output
Others
Transient Response Deviation
±3
±5
%/℃
Temperature Drift Coefficient
Ripple & Noise
--
±0.03
100
20MHz bandwidth,5%-100% load
50
mV p-p
Trim
--
±10
--
%Vo
%Io
Over-voltage Protection
Over-current Protection
Short circuit Protection
110
110
--
--
160
190
Input voltage range
Hiccup, Continuous, self-recovery
Note: *Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation.
0%-5% load ripple&Noise is no more than 5%Vo.
General Specifications
Item
Operating Conditions
Min.
Typ.
--
Max.
--
Unit
Input-output, with the test time of 1 minute and the
leak current lower than 1mA
Insulation Voltage
1500
VDC
Insulation Resistance
Isolation Capacitance
Operating Temperature
Storage Temperature
Storage Humidity
Input-output, insulation voltage 500VDC
Input-output, 100KHz/0.1V
see Fig. 1
1000
--
--
2000
--
--
--
MΩ
pF
-40
-55
+5
+75
+125
+95
℃
--
Non-condensing
--
%RH
Pin Welding Resistance
Temperature
Welding spot is 1.5mm away from the casing, 10
seconds
℃
--
--
+300
Vibration
10-55Hz, 10G, 30 Min. along X, Y and Z
Switching Frequency *
PWM mode
--
300
--
KHz
MIL-HDBK-217F@25℃
MTBF
1000
--
--
K hours
Note:* This series of products using reduced frequency technology, the switching frequency is test value of full load,When the load is reduced to below 50%, the
switching frequency decreases with decreasing load.
2015.08.12-A/2
Page 2 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
Physical Specifications
Casing Material
Aluminum alloy
Horizontal package( without heat sink)
50.80*25.40*11.80 mm
50.80*25.40*16.30 mm
76.00*31.50*21.20 mm
76.00*31.50*25.10 mm
76.00*31.50*25.80 mm
76.00*31.50*29.70 mm
26.00g/48.00g/68.00g(Typ.)
34.00g/56.00g/76.00g(Typ.)
Free air convection
Package Dimensions
Horizontal package( with heat sink)
A2S wiring package ( without heat sink)
A2S wiring package( with heat sink)
A4S rail package( without heat sink)
A4S rail package( with heat sink)
Package Dimensions
without heat sink
with heat sink
Horizontal package/A2S wiring package/A4S rail package
Weight
Horizontal package/A2S wiring package/A4S rail package
Cooling Method
EMC Specifications
CE
CISPR22/EN55022 CLASS A (Bare component)/ CLASS B (see Fig.3-
② for recommended circuit)
EMI
RE
CISPR22/EN55022 CLASS A (Bare component)/ CLASS B (see Fig.3-② for recommended circuit)
ESD
RS
IEC/EN61000-4-2 Contact ±4KV
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
IEC/EN61000-4-3 10V/m
IEC/EN61000-4-4 ±2KV (see Fig.3-① for recommended circuit)
IEC/EN61000-4-5 ±2KV (see Fig.3-①for recommended circuit)
IEC/EN61000-4-6 3 Vr.m.s
EFT
Surge
EMS
CS
Voltage
dips,
short
interruptions and voltage IEC/EN61000-4-29 0-70%
variations immunity
perf. Criteria B
Product Characteristic Curve
Temperature Derating Curve
Temperature Derating Curve
120
100
120
100
80
60
40
20
0
With heatsink
Without heatsink
With heatsink
Without heatsink
80
60
40
20
0
Safe Operating Area
Safe Operating Area
-40
0
45 55 75
120
-40
0
45 55 75
120
Operating Temperature(
)
℃
℃
Operating Temperature(
)
9-18V input, derating 80%
18-75 input
Fig. 1
2015.08.12-A/2
Page 3 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
Design Reference
1. Typical application
All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
+Vo
Vin
Vout(VDC)
3.3/5/9
12/15/24
Cout(µF)
220
Cin(µF)
100
Cout
Cin
DC
DC
GND
100
0V
Fig. 2
2. EMC solution-recommended circuit
Parameter description
Model
CY1
LCM
FUSE
Vin:24V
Vin:48V
Vin
Vin
+Vo
0V
FUSE
MOV
C0
Choose according to actual input current
C3
LOAD
DC/DC
C1
C2
C0
MOV
S14K35
S14K60
GND
GND
330µF/50V
4.7µF/50V
330µF/100V
2.2µF/100V
①
②
2
CY
C, C2
C3
Refer to the Cout in Fig.2
Fig. 3
LCM
1mH
Notes: Part ① in the Fig. 3 is used for EMS test and part ② for EMI filtering;
CY1, CY2
1nF/2KV
selected based on needs.
EMC solution-recommended circuit PCB layout
Fig. 4
Note: the min. distance of the bonding pads between input & output isolation capacitors (CY1/CY2) shall be ≥ 2mm.
3. Application of Trim and calculation of Trim resistance
+Vot
Calculation formula of Trim resistance:
+Vot
aR2
R2-a
Vref
Vo’-Vref
R1
-R3
-R3
up:
RT=
RT=
a=
a=
R1
R2
RT
R1
R3
Vref
R2
Trim
R3
Vref
Trim
aR1
R1-a
Vo’-Vref
Vref
down:
RT
R2
RT is Trim resistance
a is a self-defined parameter, with
no real meaning.
0V
Trim down
0V
Trim up
Applied circuits of Trim (Part in broken line is the interior of models)
Vout(V)
R1(KΩ)
4.801
R2(KΩ)
2.87
R3(KΩ)
12.4
10
Vref(V)
1.25
2.5
3.3
5
2.883
2.87
9
7.500
2.87
15
2.5
12
15
24
11.000
14.494
24.872
2.87
15
2.5
2.87
15
2.5
2.87
17.8
2.5
4. It is not allowed to connect modules output in parallel to enlarge the power
5. For more information please find DC-DC converter application notes on www.mornsun-power.com
2015.08.12-A/2
Page 4 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
Horizontal Package (without heat sink) Dimensions and Recommended Layout
THIRD ANGLE PROJECTION
∅1.50 [∅0.059]
Front View
11.80 [0.465]
4
5
6
3
∅1.00 [0.039]
2
1
50.80 [2.000]
45.72 [1.800]
6
5
4
Note:Grid 2.54*2.54mm
Pin-Out
1
2
Bottom View
Function
Pin
1
3
Vin
2
GND
Ctrl
3
4
Trim
0V
Note:
Unit :mm[inch]
Pin diameter tolerances :±0.10[±0.004]
General tolerances:±0.50[±0.020]
5
6
+Vo
Horizontal Package (with heat sink) Dimensions
2015.08.12-A/2
Page 5 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
URB_LD-30WR3A2S(without heat sink) Dimensions
THIRD ANGLE PROJECTION
76.00 [2.992]
LED lamp
61.60 [2.425]
Pin-Out
Pin
1
2
3
4
5
6
Ctrl
GND
Vin
Trim
0V
+Vo
1
2
3
4
5
6
Function
Top View
2-∅3.30 [∅0.130]
Note:
Unit:mm[inch]
Wire range:24~12 AWG
General tolerances:±0.50[±0.020]
Front View
URB_LD-30WHR3A2S(with heat sink) Dimensions
2015.08.12-A/2
Page 6 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
URB_LD-30WR3A4S(without heat sink) Dimensions
THIRD ANGLE PROJECTION
76.00 [2.992]
LED lamp
61.60 [2.425]
Pin-Out
Pin
1
2
3
4
5
6
1
2
3
4
5
6
Top View
Ctrl
GND
Vin
Trim
0V
+Vo
Function
Note:
Unit:mm[inch]
Wire range:24~12 AWG
General tolerances:±0.50[±0.020]
Front View
URB_LD-30WHR3A4S(with heat sink) Dimensions
2015.08.12-A/2
Page 7 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URB_LD-30WR3 Series
Notes:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com.
Horizontal Packing Bag Number: 58200035(without heat sink), 58200051(with heat sink), A2S/A4S Packing Bag Number: 58220022;
2. The maximum capacitive load offered were tested at nominal input voltage and full load;
3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75% with nominal
input voltage and rated output load;
4. All index testing methods in this datasheet are based on our Company’s corporate standards;
5. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model
products may exceed the requirements mentioned above. Please contact our technicians directly for specific information;
6. We can provide product customization service;
7. Specifications are subject to change without prior notice.
Mornsun Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: info@mornsun.cn
2015.08.12-A/2
Page 8 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
相关型号:
URB4824YMD-15WR3
15W isolated DC-DC converter DIP package with Ultra-wide Input and Regulated Single Output
MORNSUN
URB4824YMD-20WR3
20W isolated DC-DC converter DIP package with Ultra-wide Input and Regulated Single Output
MORNSUN
URB4824ZP-10WR3
10W, Ultra wide input, isolated & regulated dual/ single output, DIP package, DC-DC converter
MORNSUN
©2020 ICPDF网 联系我们和版权申明