URF2415P-6WR3 [MORNSUN]
DC/DC Converter;
| 型号： | URF2415P-6WR3 |
| 厂家： | 
MORNSUN SCIENCE& TECHNOLOGY LTD. |
| 描述： | DC/DC Converter |
| 文件： | 总5页 (文件大小：288K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converter
URF_P-6WR3 Series
6W,Ultra wide input isolated & regulated single output ,
DIP package, DC/DC converter
FEATURES
z
z
z
z
z
z
Wide range of input voltage (4:1)
Efficiency up to 88%
No-load power consumption as low as 0.12W
Isolation voltage :3K VDC
Operating temperature range: -40℃ to +85℃
Input under-voltage protection, short circuit ,
over-voltage & Over-current protection output
z
z
z
Meet CISPR22/EN55022 CLASS A
International standard pin-out
Meet UL60950 , EN60950 and IEC60950
CB
Patent Protection RoHS
URF_P-6WR3 series products are of 6W output power, extremely wide range of voltage input of 9-36VDC, 18-75VDC,isolation voltage of
3000VDC, output over-voltage protection and output short circuit protection with the bare component in compliance with
CISPR22/EN55022 CLASS A; these products are widely used in fields such as industrial control, electric power, instruments and
communication.
Selection Guide
Input Voltage (VDC)
Output
Efficiency
(%,Min./Typ.)
@ Full Load
Max.
Capacitive
Load(μF)
Certification
Part No.
Nominal
(Range)
Output Current (mA)
Max. *
Output Voltage (VDC)
(Max./Min.)
1500/75
1200/60
667/33
URF2403P-6WR3
URF2405P-6WR3
URF2409P-6WR3
URF2412P-6WR3
URF2415P-6WR3
URF2424P-6WR3
URF4803P-6WR3
URF4805P-6WR3
URF4812P-6WR3
URF4815P-6WR3
URF4824P-6WR3
3.3
5
77/79
81/83
85/87
86/88
86/88
85/87
77/79
81/83
86/88
86/88
85/87
2200
2200
1000
680
9
24
40
(9-36)
12
15
24
3.3
5
500/25
400/20
470
UL/CE/CB
250/13
330
1500/75
1200/60
500/25
2200
2200
680
48
80
12
15
24
(18-75)
400/20
470
250/13
330
Note：*Absolute maximum rating without damage on the converter, but it isn't recommended.
Input Specifications
Item
Operating Conditions
3.3V output
Min.
--
Typ.
Max.
268/8
309/8
291/8
134/7
154/7
145/7
--
Unit
mA
261/5
301/5
284/5
131/4
151/4
142/4
20
24VDC Input
5V output
--
Other output
3.3V output
5V output
--
Input Current (full load / no-load)
--
48VDC Input
--
Other output
--
24VDC Input
48VDC Input
24VDC Input
48VDC Input
24VDC Input
48VDC Input
24VDC Input
48VDC Input
--
Reflected Ripple Current
Input impulse Voltage (1sec. max.)
Starting Voltage
--
20
--
-0.7
-0.7
--
--
50
--
100
9
--
VDC
--
--
18
6.5
5.5
14.0
--
under-voltage turn-off
15.5
--
2015.04.20-A/1
Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_P-6WR3 Series
Starting Time
Input Filter
Nominal input& constant resistance load
Operating Conditions
10
ms
--
--
Pi filter
Unavailable
Hot Plug
Output Specifications
Item
Min.
--
Typ.
±1
Max.
±3
Unit
%
Output Voltage Accuracy
Full load, the input voltage is from low voltage
to high voltage
Line Regulation
--
±0.2
±0.5
Load Regulation
5%-100% load
--
--
--
±0.5
300
±3
±1
500
±5
Transient Recovery Time
Transient Response Deviation
μs
25% load step change
%
%/℃
Temperature Drift Coefficient
Full load
--
--
±0.03
Ripple&Noise*
20MHz bandwidth
--
85
--
120
160
190
mV p-p
%Vo
Over-voltage Protection
Over-current Protection
Short circuit Protection
110
110
Input voltage range
140
%Io
Continuous, self-recovery
Note: * Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods.
General Specifications
Item
Operating Conditions
Min.
Typ.
--
Max.
--
Unit
Input-output, with the test time of 1 minute and the
leak current lower than 1mA
Isolation Voltage
3000
VDC
Isolation Resistance
Isolation Capacitance
Operating Temperature
Storage Temperature
Storage Humidity
Input-output, insulation voltage 500VDC
Input-output, 100KHz/0.1V
1000
--
--
--
--
MΩ
1000
pF
Derating if the temperature is ≥71℃(see Fig. 1)
-40
-55
5
--
--
--
85
125
95
℃
Non-condensing
%
Pin Welding Resistance
Temperature
Welding spot is 1.5mm away from the casing, 10
seconds
--
--
300
Vibration
10-55Hz, 10G, 30 Min. along X, Y and Z
Switching Frequency
MTBF
PWM mode
--
300
--
--
--
KHz
MIL-HDBK-217F@25
℃
1000
K hours
Physical Specifications
Casing Material
Plastic (UL94-V0)
31.60*20.30*10.20 mm
13.00g(Typ.)
Package Dimensions
Weight
Free air convection
Cooling method
EMC Specifications
CISPR22/EN55022 CLASS A (Bare component)/
CLASS B (see Fig.3-② for recommended circuit)
CISPR22/EN55022 CLASS A (Bare component)/
CLASS B (see Fig.3-② for recommended circuit)
CE
EMI
RE
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Contact ±4KV
10V/m
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
±2KV (see Fig.3-① for recommended circuit)
±2KV (see Fig.3-①for recommended circuit)
3 Vr.m.s
EFT
EMS
Surge
CS
Immunities of voltage dip,
drop and short interruption
IEC/EN61000-4-29 0-70%
perf. Criteria B
2015.04.20-A/1
Page 2 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_P-6WR3 Series
Product Characteristic Curve
Temperature Derating Curve
Safe Operating Area
120
100
80
60
40
20
0
-40
0
40
71 85
120
Operating Temperature(
℃
)
Fig. 1
Efficiency Vs Output Load(Vin=24)
Efficiency Vs Input (Full Load)
100
95
100
95
90
85
80
75
70
65
60
90
URF2405P-
6WR3
85
URF2405P-
6WR3
80
75
70
65
60
55
50
9
12 15 18 21 24 27 30 33 36
Input Voltage (V)
5
10 20 30 40 50 60 70 80 90 100
Output Current Percentage (%)
Efficiency Vs Output Load(Vin=48)
100
Efficiency Vs Input (Full Load)
100
95
90
85
80
75
70
65
60
95
90
85
80
75
70
65
60
55
50
URF4815P-
6WR3
URF4815P-
6WR3
5
10 20 30 40 50 60 70 80 90 100
Output Current Percentage (%)
18 24 30 36 42 48 54 60 66 75
Input Voltage (V)
Design Reference
1. Typical application
All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
+Vo
Vin
Vin(VDC)
Cin(μF)
100
Cout(μF)
Cout
Cin
DC
DC
24
48
10
10
GND
10~47
0V
Fig. 2
2015.04.20-A/1
Page 3 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_P-6WR3 Series
2. EMC solution-recommended circuit
Parameter description
Model
LCM
FUSE
V in
Vin
+Vo
Vin:24V
Vin:48V
+
FUSE
MOV
C0
Choose according to actual input current
LOAD
DC/DC
C3
C0
C1
C2
MOV
S14K35
S14K60
GND
0V
GND
①
②
330μF/50V
2.2μF/50V
330μF/100V
2.2μF/100V
C1,C2
Fig. 3
2.2 mH, recommended to use MORNSUN’s
FL2D-30-222
LCM
C3
Notes: Part ① in the Fig. 3 is used for EMS test and part ② for EMI filtering;
Refer to the Cout in Fig.2
selected based on needs.
EMC solution-recommended circuit PCB layout
Fig. 4
3. The product does not support output in parallel with power per liter
4. For more information please find DC-DC converter application notes on www.mornsun-power.com
Dimensions and Recommended Layout
THIRDANGLEPROJECTION
∅
1.00[∅0.039]
FrontView
23 22
14
11
16
∅
0.50[0.020]
31.60[1.244]
22.86[0.900]
2
3
9
2
3
9
11
14
Note:Grid2.54*2.54mm
Pin-Out
BottomView
Pin
2,3
9
Function
GND
23 22
16
NoPin
11
14
16
NC
2.54[0.100]
5.08[0.200]
+Vo
0V
22,23
Vin
Note:
Unit:mm[inch]
Pindiametertolerances:±0.10[±0.004]
Generaltolerances:±0.50[±0.020]
2015.04.20-A/1
Page 4 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_P-6WR3 Series
Note:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com.The
Packing bag number of Horizontal package: 58210008;
2. Recommended used in more than 5% load, if the load is lower than 5%, then the ripple index of the product may exceed the
specification, but does not affect the reliability of the product;
3. The min. load shall be no lower than 5%, or the output ripple may increase rapidly; If the product is operated under the min. required
load, the product performance cannot be guaranteed to comply with all performance indexes in the Manual, but the reliability of the
product will not be influenced;
4. The max. capacitive load should be tested within the input voltage range and under full load conditions;
5. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25℃, humidity<75% when inputting
nominal voltage and outputting rated load;
6. All index testing methods in this datasheet are based on our Company’s corporate standards;
7. The performance indexes of the product models listed in this datasheet are as above, but some indexes of non-standard model
products will exceed the above-mentioned requirements, and please directly contact our technicians for specific information;
8. We can provide product customization service;
9. Specifications of this product are subject to changes without prior notice.
Mornsun Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: isnfo@mornsun.cn
2015.04.20-A/1
Page 5 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
相关型号：
©2020 ICPDF网 联系我们和版权申明