首页 |元器件品牌

WRB2405ZP-6W [MORNSUN]

DUAL/ SINGLE OUTPUT DIP DC-DC CONVERTER; 双路/单路输出DIP封装DC- DC转换器
WRB2405ZP-6W
型号： WRB2405ZP-6W
厂家： MORNSUN SCIENCE& TECHNOLOGY LTD.    MORNSUN SCIENCE& TECHNOLOGY LTD.
描述：

DUAL/ SINGLE OUTPUT DIP DC-DC CONVERTER
双路/单路输出DIP封装DC- DC转换器

转换器 输出元件 DC-DC转换器
文件： 总2页 (文件大小：117K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
WRA_ZP-6W & WRB_ZP-6W Series  
6W, WIDE INPUT, ISOLATED & REGULATED  
DUAL/ SINGLE OUTPUT DIP DC-DC CONVERTER  
multi-country patent protection RoHS  
FEATURES  
PRODUCT PROGRAM  
Efficiency up to 86%  
Wide (2:1) Input Range  
Input  
Voltage (VDC)  
Nominal Range  
Output  
Part  
Number  
Efficiency  
(%, Typ)  
Current (mA)  
Voltage  
(VDC)  
1.5KVDC Input/Output Isolation  
Short circuit protection(automatic recovery)  
Operating Temperature: -40°C to +85°C  
Internal SMD construction  
Metal Shielding Package  
No Heat Sink Required  
Industry-Standard Pinout  
MTBF>1,000,000 hours  
RoHS Compliance  
Max*  
Max  
Min  
±60  
±25  
±20  
120  
50  
WRA0505ZP-6W  
WRA0512ZP-6W  
WRA0515ZP-6W  
WRB0505ZP-6W  
WRB0512ZP-6W  
WRB0515ZP-6W  
WRB0524ZP-6W  
WRA1205ZP-6W  
WRA1212ZP-6W  
WRA1215ZP-6W  
WRB1203ZP-6W  
WRB1205ZP-6W  
WRB1212ZP-6W  
WRB1215ZP-6W  
WRB1224ZP-6W  
WRA2405ZP-6W  
WRA2412ZP-6W  
WRA2415ZP-6W  
WRB2403ZP-6W  
WRB2405ZP-6W  
WRB2412ZP-6W  
WRB2415ZP-6W  
WRB2424ZP-6W  
WRA4805ZP-6W  
WRA4812ZP-6W  
WRA4815ZP-6W  
WRB4805ZP-6W  
WRB4812ZP-6W  
WRB4815ZP-6W  
WRB4824ZP-6W  
±5  
±12  
±15  
5
±600  
±250  
±200  
1200  
500  
76  
80  
82  
76  
80  
82  
83  
78  
82  
84  
77  
78  
82  
84  
83  
80  
84  
86  
79  
80  
84  
86  
85  
80  
84  
86  
80  
84  
86  
85  
5
4.5-9  
11  
12  
15  
24  
±5  
400  
40  
250  
25  
±600  
±250  
±200  
1500  
1200  
500  
±60  
±25  
±20  
150  
120  
50  
±12  
±15  
3.3  
5
12  
9-18  
20  
APPLICATIONS  
12  
15  
24  
±5  
The WRA_ZP-6W & WRB_ZP-6W Series are  
specially designed for applications where a wide  
range input voltage power supplies are isolated  
from the input power supply in a distributed  
power supply system on a circuit board.  
These products apply to:  
400  
40  
250  
25  
±600  
±250  
±200  
1500  
1200  
500  
±60  
±25  
±20  
150  
120  
50  
±12  
±15  
3.3  
5
1) Where the voltage of the input power supply is  
wide range (voltage range≤2:1);  
24  
18-36  
40  
12  
15  
24  
±5  
2) Where isolation is necessary between input  
and output(Isolation Voltage≤1500VDC);  
3) Where the regulation of the output voltage and  
the output ripple noise are demanded.  
400  
40  
250  
25  
±600  
±250  
±200  
1200  
500  
±60  
±25  
±20  
120  
50  
±12  
±15  
5
48  
36-72  
80  
12  
15  
24  
MODEL SELECTION  
400  
40  
250  
25  
WRB2405ZP-6W  
Rated Power  
Package Style  
Output Voltage  
Input Voltage  
* Input voltage can’t exceed this value, or will cause the permanent damage.  
Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically.  
Operation under 10% load will not damage the converter; However, they may not meet all specification listed.  
Product Series  
OUTPUT SPECIFICATIONS  
Item  
Test Conditions  
Min  
0.6  
Typ  
Max Units  
Output Power  
See below products program  
6
W
Positive Voltage Accuracy Refer to recommended circuit  
Negative Voltage Accuracy Refer to recommended circuit  
±1  
±3  
±3  
±5  
%
MORNSUN Science & Technology co.,Ltd.  
Address: 2th floor 6th building, Huangzhou  
Industrial District, Guangzhou, China  
Tel: 86-20-38601850  
Fax: 86-20-38601272  
Http://www.mornsun-power.com  
Load Regulation  
From 10% To 100% load  
±0.5  
±0.2  
0.02  
20  
±1*  
±0.5  
Line Regulation(at full load) Input voltage from low to high  
Temperature Drift(Vout)  
Ripple**  
Refer to recommended circuit  
20MHz bandwidth  
%/°C  
mVp-p  
KHz  
50  
Noise**  
20MHz bandwidth  
50  
100  
Switching Frequency  
100% load, nominal Input voltage  
300  
*Dual output models unbalanced load: ±5%.  
**Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power  
Converter section, application notes.  
MORNSUN reserves the copyright  
Specifications subject to change without notice.  
WRA_ZP-6W & WRB_ZP-6W  
A/2-2008  
Page 1 of 2  
COMMON SPECIFICATION  
Recommended Circuit  
All the WRA_ZP-6W&WRB_ZP-6W Series  
have been tested according to the following  
recommended testing circuit before leaving  
factory. This series should be tested under load.  
Never be tested under no load (see Figure 1).  
Dual Output  
Item  
Test Conditions  
Min  
Typ  
40  
Max  
95  
Units  
%
Storage humidity  
Operating temperature  
Storage temperature  
Temp. rise at full load  
Lead temperature  
Cooling  
-40  
-55  
85  
125  
°C  
1.5mm from case for 10 seconds  
300  
+Vout  
Vin  
Free air convection  
Cin  
0V  
DC DC  
Short circuit protection  
Case material  
Isolation voltage  
Isolation resistance  
No-load power consumption  
MTBF  
Continuous, automatic recovery  
Copper, Nickel Plated  
GND  
-Vout  
Tested for 1 minute and 1 mA max 1500  
VDC  
MΩ  
Single Output  
Vin  
Cin  
+Vout  
0V  
Test at 500VDC  
1000  
1000  
DC DC  
(Figure 1)  
500  
17  
mW  
GND  
K hours  
g
Weight  
If you want to further decrease the input/output  
ripple, you can increase capacitance properly or  
choose capacitors with low ESR. However, the  
capacitance of the output filter capacitor must be  
proper. If the capacitance is too big, a startup  
problem might arise. For every channel of output,  
provided the safe and reliable operation is  
ensured, the greatest capacitance of its filter  
capacitor sees (Table 1). General:  
Note:  
1.All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless  
otherwise specified.  
2.See below recommended circuits for more details.  
TYPICAL CHARECTERISTICS  
Temperature Derating Graph  
Safe Operating Area  
Cin: 5V&12V  
24V&48V 10μF-47μF  
Cout:10μF/100mA  
100μF  
Output External Capacitor Table(Table 1)  
Operating Temp.( C )  
Single Vout  
(VDC)  
Cout  
(uF)  
Dual Vout  
(VDC)  
Cout  
(uF)  
OUTLINE DIMENSIONS & PIN CONNECTIONS  
3.3  
5
9
2200  
1000  
680  
±5  
±9  
±12  
±15  
680  
470  
330  
220  
First Angle Projection  
RECOMMENDED FOOTPRINT  
Top view,grid:2.54mm(0.1inch)  
diameter:1.00mm(0.039inch)  
12  
15  
24  
470  
330  
220  
32.00(1.260)  
Dual Output  
2 3  
9
11  
23 22  
16 14  
Input Current  
(Bottom View)  
When it is used in unregulated power supply,  
be sure that the fluctuating range of the power  
supply and the rippled voltage do not exceed the  
module standard. Input current of power supply  
should afford the startup current of this kind of  
DC/DC module (See figure 2), General:  
Ip ≤1.4*Iin-max  
2322  
16 14  
2 3  
9
11  
15.24(0.600)  
Single Output  
22.86(0.900)  
22  
16  
23  
14  
11  
2 3  
(Side View)  
Ip  
FOOTPRINT DETAILS  
Pin  
Single  
Dual  
2、3  
GND  
No Pin  
NC  
+Vo  
0V  
GND  
0V  
9
11  
Note:  
Unit:mm(inch)  
Input Voltage  
Range  
-Vo  
+Vo  
0V  
14  
16  
Pin diameter:0.50mm(0.020inch)  
Pin diameter tolerances: 0.05mm( 0.002inch)  
General tolerances: 0.25mm( 0.010inch)  
Input Voltage (V)  
22、23  
Vin  
Vin  
NC:No Connection  
APPLICATION NOTE  
No parallel connection or plug and play.  
Requirement On Output Load  
In order to ensure the product operate efficiently and reliably, in addition to a max load  
(namely full load), a minimum load is specified for this kind of DC/DC converter. Make sure the  
specified range of input voltage is not exceeded, the minimum output load no less than 10%  
load. If the actual load is less than the specified minimum load, the output ripple may increase  
sharply while its efficiency and reliability will reduce greatly. If the actual output power is very  
small, please add an appropriate resistor as extra loading, or contact our company for other  
lower output power products.  
MORNSUN reserves the copyright  
Specifications subject to change without notice.  
WRA_ZP-6W & WRB_ZP-6W  
A/2-2008  
Page 2 of 2  

相关型号：

WRB2405ZS-2W

 Wide Input,Isolated& Regulated Single Output SIP-8 DC/DC Converter

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2405ZS-3W

 3W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2405ZT-1W5

 1.5W,WIDE INPUT ISOLATED®ULATED SINGLE/DUAL OUTPUT DC/DC CONVERTER MINIATURE SMD PACKAGE

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2407YD-4W

 4W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2407YD-6W

 6W,WIDEINPUT, ISOLATED®ULATEDDUAL/SINGLEOUTPUTDC-DCCONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2407ZHD-3W

 3W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2407ZHD-830

 6W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MICRODC

WRB2409CKS-1W

 DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MORNSUN

WRB2409CS-1W

 DUAL/SINGLE OUTPUT DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MORNSUN

WRB2409CS-2W

 DUAL/SINGLE OUTPUT DC-DC CONVERTER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
MORNSUN
©2020 ICPDF网 联系我们和版权申明