WRD121212MP-3W [MORNSUN]
TWIN OUTPUT DIP DC-DC CONVERTER; 双输出DIP封装DC- DC转换器![WRD121212MP-3W](http://pdffile.icpdf.com/pdf1/p00126/img/icpdf/WRD12_696415_icpdf.jpg)
型号: | WRD121212MP-3W |
厂家: | ![]() |
描述: | TWIN OUTPUT DIP DC-DC CONVERTER |
文件: | 总2页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
WRD_(M)P-3W Series
3W, WIDE INPUT ISOLATED & REGULATED
TWIN OUTPUT DIP DC-DC CONVERTER
multi-country patent protection RoHS
FEATURES
PRODUCT PROGRAM
Wide (2:1) Input Range
Twin output
Operating Temperature: -40°C to+85°C
UL94-V0 Package
No external component required
Industry Standard Pin out
Short Circuit Protection(automatic recovery)
Five-sided metal shielding(WRD_MP)
MTBF>1,000,000 hours
Input
Output
Part
Number
Efficiency
(%, Typ)
No-load
Current
(mA,Typ)
Voltage (VDC)
Current(mA)
Voltage
(VDC)
Nominal Range Max*
Max
300
166
125
100
62
Min
30
16
12
10
6
WRD050505(M)P-3W
WRD050909(M)P-3W
WRD051212(M)P-3W
WRD051515(M)P-3W
WRD052424(M)P-3W
WRD120505(M)P-3W
WRD120909(M)P-3W
WRD121212(M)P-3W
WRD121515(M)P-3W
WRD122424(M)P-3W
WRD240505(M)P-3W
WRD240909(M)P-3W
WRD241212(M)P-3W
WRD241515(M)P-3W
WRD242424(M)P-3W
WRD480505(M)P-3W
WRD480909(M)P-3W
WRD481212(M)P-3W
WRD481515(M)P-3W
WRD482424(M)P-3W
5
9
68
70
72
73
72
74
76
80
79
81
76
78
82
80
82
76
78
80
79
82
5
4.5-9.0
9.0-18
18-36
36-72
11
22
40
80
40
20
10
5
12
15
24
5
No Heat Sink Required
RoHS Compliance
300
166
125
100
62
30
16
12
10
6
9
12
24
48
12
15
24
5
APPLICATIONS
300
166
125
100
62
30
16
12
10
6
The WRD_(M) P-3W Series are specially
designed for applications where a wide range
input voltage power supplies are isolated from
the input power supply in a distributed power
supply system on a circuit board.
9
12
15
24
5
These products apply to:
300
166
125
100
62
30
16
12
10
6
1) Where the voltage of the input power supply is
wide range (voltage range ≤2:1);
9
12
15
24
2) Where isolation is necessary between
(Isolation Voltage ≤ 1000VDC);
3) Where the regulation of the output voltage and
the output ripple noise are demanded.
* Input voltage can’t exceed this value, or will cause the permanent damage.
Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically.
Operation under 10% load will not damage the converter; However, they may not meet all specification
listed.
OUTPUT SPECIFICATIONS
Item
Test conditions
Min
0.3
Typ
Max Units
MODEL SELECTION
Output power
Refer to below product program
3
±3
±5
W
WRD051212(M)P-3W
Rated Power
Main output voltage accuracy Refer to recommended circuit
Vice-output voltage accuracy Refer to recommended circuit
±1
±3
Package Style
2nd Output Voltage
1st Output Voltage
Input Voltage
%
Load Regulation
Line Regulation
Temperature Drift(Vout)
Ripple**
From 10% to 100% load
Input voltage from low to high
Refer to recommended circuit
20MHz Bandwidth
±0.5
±0.2
±1*
±0.5
±0.03
50
Product Series
%/℃
20
75
mVp-p
Noise**
20MHz Bandwidth
150
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
Switching Frequency
Isolation Capacitance
100% load, nominal Input voltage
300
100
KHz
PF
*Dual output models unbalanced load: ±5%.
**Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of
Power Converter section, application notes.
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output
load unless otherwise specified.
2. See below recommended circuits for more details.
MORNSUN reserves the copyright
Specifications subject to change without notice.
WRD_(M)P-3W
A/0-2008
Page 1 of 2
COMMON SPECIFICATION
Recommended Circuit
All the WRD_(M)P-3W Series have been tested
according to the following recommended testing
circuit before leaving factory. This series should be
tested under load (see Figure 1).
Item
Test conditions
Min
Typ
15
Max
95
Units
%
Storage Humidity
Operating temperature
Storage Temperature
Temp. rise at full load
Lead temperature
Cooling
-40
-55
85
125
℃
+Vo1
Vin
Cout
Cout
1.5mm from case for 10 seconds
300
0V1
0V2
Cin
DC DC
Free Air Convection
GND
+Vo2
Case Material
Short circuit protection
Isolation voltage
Isolation resistance
MTBF
P: Plastic (UL94-V0) MP: Steel, Nickel Plated
(Figure 1)
Continuous, Automatic Recovery
1500
1000
1000
15
VDC
MΩ
If you want to further decrease the input/output
ripple, you can increase capacitance properly or
choose capacitors with low ESR. However, the
capacitance should not be too high, or may cause
start-up problem. If you want to use the products in
high EMI, please choose our metal packaged
products(WRD_MP-3W). For every channel of
output, provided the safe and reliable operation is
ensured, the greatest capacitance of its filter
capacitor sees (Table 1). General:
K hours
g
Weight
TYPICAL CHARECTERISTICS
Cin: 5V,12V
24V,48V 22/10μF
Cout: 10μF/100mA
Output External Capacitor Table (Table 1)
100μF
Vout(VDC)
Cout(uF)
680
Operating Temp.(
C)
5
9
470
OUTLINE DIMENSIONS & FOOTPRINT DETAILS
12
15
24
330
220
First Angle Projection
RECOMMENDED FOOTPRINT
31.80(1.252)
100
Top view,grid:2.54mm(0.1inch)
diameter:1.00mm(0.039inch)
2
3
9 1011
Input current
(Bottom View)
While using unstable power source, please ensure
the output voltage and ripple voltage do not excced
indexes of the converter. The preceding power
source must be able to provide for converter sufficient
starting current Ip (Figure 2).
2322
161514
2322
161514
2.54
( 0.100 )
4.47
( 0.173 )
22.86(0.900)
10
11
2
3
9
General: Ip ≤1.4*Iin-max
(Side View)
Ip
FOOTPRINT DETAILS
Function
Pin
GND
0V2
NC
2,3
9
10,15
11
Input Voltage
Range
+Vo2
+Vo1
0V1
Vin
14
Note:
Unit:mm(inch)
Pin diameter:0.50mm(0.020inch)
Pin diameter tolerances: 0.05mm(
General tolerances: 0.25mm(
Input Voltage (V)
16
22,23
±
±0.002inch)
0.010inch)
NC:No Connection
±
±
No parallel connection or plug and play.
APPLICATION NOTE
Requirement on output load
In order to ensure the product operate efficiently and reliably, in addition to a max load
(namely full load), a minimum load is specified for this kind of DC/DC converter. Make sure
the specified range of input voltage is not exceeded, the minimum output load no less than
10% load. If the actual load is less than the specified minimum load, the output ripple may
increase sharply while its efficiency and reliability will reduce greatly. If the actual output
power is very small, please add an appropriate resistor as extra loading, or contact our
company for other lower output power products.
MORNSUN reserves the copyright
Specifications subject to change without notice.
WRD_(M)P-3W
A/0-2008
Page 2 of 2
相关型号:
![](http://pdffile.icpdf.com/pdfupload1/u00002/img/page/WRD121212YKD-6W_1024720_files/WRD121212YKD-6W_1024720_1.jpg)
![](http://pdffile.icpdf.com/pdfupload1/u00002/img/page/WRD121212YKD-6W_1024720_files/WRD121212YKD-6W_1024720_2.jpg)
WRD121212YKD-6W
6W, WIDE INPUT ISOLATED & REGULATED TWIN OUTPUT DIP24 DC-DC CONVERTER 6W,宽输入隔离双输出隔离电压1500VDC和稳压双输出DIP24封装 DC-DC变换器
MICRODC
©2020 ICPDF网 联系我们和版权申明