KMC7447RX1000NB [MOTOROLA]
RISC Microprocessor, 32-Bit, 1000MHz, CMOS, CBGA360, 25 X 25 MM, 3.20 MM HEIGHT, 1.27 MM PITCH, CERAMIC, FLIP CHIP, BGA-360;
| 型号： | KMC7447RX1000NB |
| 厂家： | 
MOTOROLA |
| 描述： | RISC Microprocessor, 32-Bit, 1000MHz, CMOS, CBGA360, 25 X 25 MM, 3.20 MM HEIGHT, 1.27 MM PITCH, CERAMIC, FLIP CHIP, BGA-360 |
| 文件： | 总4页 (文件大小：38K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Advance Information
MPC7457TRXNXPNS
Rev. 0, 5/2004
MPC7457 Part Number
Specification for the
MPC74x7TRXnnnnNx Series
Motorola Part
This document describes part-number-specific changes to recommended operating conditions
Numbers Affected:
and revised electrical specifications, as applicable, from those described in the general
MPC7457 RISC Microprocessor Hardware Specifications (Order No. MPC7457EC). The
MPC7457 and MPC7447 are implementations of the PowerPC™ microprocessor family of
reduced instruction set computer (RISC) microprocessors.
MC7457TRX1000NC
MC7457TRX733NC
MC7447TRX1000NB
MC7447TRX733NB
Specifications provided in this document supersede those in the MPC7457 RISC
Microprocessor Hardware Specifications, Rev. 2 or later, for the part numbers listed in
Table A only. This document is primarily concerned with the MPC7457; however, unless
otherwise noted, all information herein also applies to the MPC7447 part numbers listed in
Table A. Specifications not addressed herein are unchanged. Because this document is
frequently updated, refer to http://www.motorola.com/semiconductors or to your Motorola
sales office for the latest version.
Note that headings and table numbers in this document are not consecutively numbered. They
are intended to correspond to the heading or table affected in the general hardware
specification.
Part numbers addressed in this document are listed in Table A.
Table A. Part Numbers Addressed by this Data Sheet 1
Operating Conditions
Motorola
Part Number
Significant Differences from
Hardware Specification
CPU
Frequency
(MHz)
Tj
(°C)
VDD
MC7457TRX733NC
MC7457TRX1000NC
MC7447TRX733NB
MC7447TRX1000NB
733
1000
733
1.1 V ± 50 mV –40 to 105 Modified core frequency and
voltage to reduce power
consumption, modified processor
bus AC timing, extended
temperature range.
1000
1
Operating conditions applicable to full-power mode only. Other modes require different core voltage,
junction temperature, and core frequency specifications.
Ordering Information
1.11 Ordering Information
1.11.1 Part Numbers Addressed by This Specification
Table 22 provides the ordering information for the MPC7457 parts described in this document.
Table 22. Part Marking Nomenclature
xx
74x7
x
RX
nnnn
x
x
Product
Code
Part
Identifier
Process
Descriptor
Processor
Application
Modifier
Package
Revision Level
Frequency1
MC
7457
7447
T: –40 to 105°C RX = CBGA
T: –40 to 105°C RX = CBGA
1000
733
N: 1.1 V ± 50 mV C: 1.2: PVR = 8002 0102
MC
1000
733
N: 1.1 V ± 50 mV B: 1.1: PVR = 8002 0101
Notes:
1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other
specifications may support other maximum core frequencies.
1.11.3 Part Marking
Parts are marked as the example shown in Figure 29.
MC7457
TRX1000NC
MMMMMM
ATWLYYWWA
CCCCC
7457
BGA
Notes:
MMMMMM is the 6-digit mask number.
ATWLYYWWA is the traceability code.
CCCCC is the country of assembly. This space is left blank if parts are assembled in the United States.
Figure 29. Motorola Part Marking for BGA Devices
2
MPC7457 Part Number Specification for the MPC74x7TRXnnnnNx Series MOTOROLA
Document Revision History
Document Revision History
Table B provides a revision history for this part number specification.
Table B. Document Revision History
Rev. No.
Date
Substantive Change(s)
0
05/20/2004
Initial release.
MOTOROLA MPC7457 Part Number Specification for the MPC74x7TRXnnnnNx Series
3
HOW TO REACH US:
USA/EUROPE/LOCATIONS NOT LISTED:
Motorola Literature Distribution
P.O. Box 5405, Denver, Colorado 80217
1-480-768-2130
(800) 521-6274
JAPAN:
Motorola Japan Ltd.
SPS, Technical Information Center
3-20-1, Minami-Azabu Minato-ku
Tokyo 106-8573 Japan
Information in this document is provided solely to enable system and software implementers to use
Motorola products. There are no express or implied copyright licenses granted hereunder to design
or fabricate any integrated circuits or integrated circuits based on the information in this document.
81-3-3440-3569
ASIA/PACIFIC:
Motorola Semiconductors H.K. Ltd.
Silicon Harbour Centre, 2 Dai King Street
Tai Po Industrial Estate, Tai Po, N.T., Hong Kong
852-26668334
Motorola reserves the right to make changes without further notice to any products herein.
Motorola makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does Motorola assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be provided in
Motorola data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated
for each customer application by customer’s technical experts. Motorola does not convey any
license under its patent rights nor the rights of others. Motorola products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the
body, or other applications intended to support or sustain life, or for any other application in which
the failure of the Motorola product could create a situation where personal injury or death may
occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized
application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was
negligent regarding the design or manufacture of the part.
TECHNICAL INFORMATION CENTER:
(800) 521-6274
HOME PAGE:
www.motorola.com/semiconductors
Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
digital dna is a trademark of Motorola, Inc. The described product is a PowerPC microprocessor.
The PowerPC name is a trademark of IBM Corp. and used under license. All other product or
service names are the property of their respective owners. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
© Motorola, Inc. 2004
MPC7457TRXNXPNS
相关型号：
KMC7447RX1267LB
RISC Microprocessor, 32-Bit, 1267MHz, CMOS, CBGA360, 25 X 25 MM, 3.20 MM HEIGHT, 1.27 MM PITCH, CERAMIC, FLIP CHIP, BGA-360
MOTOROLA
KMC7448VS1267ND
32-BIT, 1267MHz, RISC PROCESSOR, CBGA360, 25 X 25 MM, 1.90 MM HEIGHT, 1.27 MM PITCH, ROHS COMPLIANT, HCTE, CERAMIC, LGA-360
NXP
KMC7448VU1267ND
32-BIT, 1267MHz, RISC PROCESSOR, CBGA360, 25 X 25 MM, 1.90 MM HEIGHT, 1.27 MM PITCH, ROHS COMPLIANT, HCTE, CERAMIC, LGA-360
NXP
KMC7448VU1400ND
32-BIT, 1400MHz, RISC PROCESSOR, CBGA360, 25 X 25 MM, 1.90 MM HEIGHT, 1.27 MM PITCH, ROHS COMPLIANT, HCTE, CERAMIC, LGA-360
NXP
KMC7448VU1700LD
32-BIT, 1700MHz, RISC PROCESSOR, CBGA360, 25 X 25 MM, 2.20 MM HEIGHT, 1.27 MM PITCH, ROHS COMPLIANT, HCTE, CERAMIC, LGA-360
NXP
KMC7457VG1000NC
32-BIT, 1000MHz, RISC PROCESSOR, CBGA483, 29 X 29 MM, 3.22 MM HEIGHT, 1.27 MM PITCH, ROHS COMPLIANT, CERAMIC, BGA-483
NXP
KMC80VB10112X20LL
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 80V, 100uF, THROUGH HOLE MOUNT, RADIAL LEADED
CHEMI-CON
KMC80VB33010X16LL
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 80V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED
CHEMI-CON
©2020 ICPDF网 联系我们和版权申明