MC33174VD [MOTOROLA]
Operational Amplifier, 4 Func, 6500uV Offset-Max, BIPolar, PDSO14, PLASTIC, SOIC-14;
| 型号： | MC33174VD |
| 厂家： | 
MOTOROLA |
| 描述： | Operational Amplifier, 4 Func, 6500uV Offset-Max, BIPolar, PDSO14, PLASTIC, SOIC-14 光电二极管 |
| 文件： | 总17页 (文件大小：283K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Order this document by MC33171/D
DUAL
Quality bipolar fabrication with innovative design concepts are employed
for the MC33171/72/74 series of monolithic operational amplifiers. These
devices operate at 180 µA per amplifier and offer 1.8 MHz of gain bandwidth
product and 2.1 V/µs slew rate without the use of JFET device technology.
Although this series can be operated from split supplies, it is particularly
suited for single supply operation, since the common mode input voltage
8
8
1
1
P SUFFIX
PLASTIC PACKAGE
CASE 626
D SUFFIX
PLASTIC PACKAGE
CASE 751
includes ground potential (V ). With a Darlington input stage, these devices
EE
(SO–8)
exhibit high input resistance, low input offset voltage and high gain. The all
NPN output stage, characterized by no deadband crossover distortion and
large output voltage swing, provides high capacitance drive capability,
excellent phase and gain margins, low open loop high frequency output
impedance and symmetrical source/sink AC frequency response.
The MC33171/72/74 are specified over the industrial/ automotive
temperature ranges. The complete series of single, dual and quad
operational amplifiers are available in plastic as well as the surface mount
packages.
PIN CONNECTIONS
1
2
3
4
8
Offset Null
Inv. Input
NC
7
6
5
V
CC
–
+
Output
Noninv. Input
V
Offset Null
EE
• Low Supply Current: 180 µA (Per Amplifier)
• Wide Supply Operating Range: 3.0 V to 44 V or ±1.5 V to ±22 V
(Single, Top View)
• Wide Input Common Mode Range, Including Ground (V
• Wide Bandwidth: 1.8 MHz
• High Slew Rate: 2.1 V/µs
)
EE
1
2
3
4
8
7
6
5
Output 1
Inputs 1
V
CC
1
Output 2
–
+
2
–
+
Inputs 2
• Low Input Offset Voltage: 2.0 mV
V
EE
• Large Output Voltage Swing: –14.2 V to +14.2 V (with ±15 V Supplies)
• Large Capacitance Drive Capability: 0 pF to 500 pF
• Low Total Harmonic Distortion: 0.03%
(Top View)
• Excellent Phase Margin: 60°C
• Excellent Gain Margin: 15 dB
QUAD
• Output Short Circuit Protection
• ESD Diodes Provide Input Protection for Dual and Quad
14
14
1
1
P SUFFIX
D SUFFIX
PLASTIC PACKAGE
CASE 646
PLASTIC PACKAGE
CASE 751A
(SO–14)
PIN CONNECTIONS
ORDERING INFORMATION
1
2
3
4
5
14
Output 1
Inputs 1
Output 4
Op Amp
Function
Operating
13
–
+
–
Device
Temperature Range
Package
SO–8
Inputs 4
4
1
12
+
Single
MC33171D
MC33171P
T
T
A
= –40° to +85°C
= –40° to +85°C
A
11
V
V
CC
EE
Inputs 3
Output 3
Plastic DIP
10
9
+
–
+
–
Dual
MC33172D
MC33172P
T
T
A
= –40° to +85°C
= –40° to +85°C
SO–8
Plastic DIP
A
2
3
Inputs 2
Output 2
6
7
8
Quad
MC33174D
MC33174P
T
T
A
= –40° to +85°C
= –40° to +85°C
SO–14
Plastic DIP
A
(Top View)
Motorola, Inc. 1996
Rev 0
MC33171 MC33172 MC33174
MAXIMUM RATINGS
Rating
Symbol
V /V
CC EE
Value
±22
Unit
V
Supply Voltage
Input Differential Voltage Range
Input Voltage Range
V
(Note 1)
(Note 1)
Indefinite
–40 to +85
+150
V
IDR
V
V
IR
Output Short Circuit Duration (Note 2)
Operating Ambient Temperature Range
Operating Junction Temperature
Storage Temperature Range
t
sec
°C
°C
°C
SC
T
A
T
J
T
–65 to +150
stg
NOTES: 1. Either or both input voltages must not exceed the magnitude of V
or V
EE.
CC
2. Power dissipation must be considered to ensure maximum junction temperature (T )
J
is not exceeded.
Representative Schematic Diagram
(Each Amplifier)
V
CC
Q3
Q8
Q4
Q5
Q6
Q7
Q1
Q17
Q2
R1
R2
C1
D2
Q18
Bias
R6
R7
Q11
Output
Q9
Q10
–
Inputs
+
R8
C2
D3
Q19
Q15
Q16
Q13
Q14
Q12
D1
Current
Limit
R5
R3
R4
V
/Gnd
EE
Offset Null
(MC33171)
2
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
DC ELECTRICAL CHARACTERISTICS (V
unless otherwise noted.)
= +15 V, V
= –15 V, R connected to ground, T = T
to T
[Note 3],
CC
EE
L
A
low
high
Characteristics
Symbol
Min
Typ
Max
Unit
Input Offset Voltage (V
= 0 V)
V
IO
mV
CM
= –15 V, T = +25°C
V
CC
V
CC
V
CC
= +15 V, V
= +5.0 V, V
= +15 V, V
—
—
—
2.0
2.5
—
4.5
5.0
6.5
EE
EE
EE
A
= 0 V, T = +25°C
A
= –15 V, T = T
to T
low high
A
Average Temperature Coefficient of Offset Voltage
∆V /∆T
IO
—
10
—
µV/°C
Input Bias Current (V = 0 V)
I
IB
nA
CM
T
T
A
= +25°C
—
—
20
—
100
200
A
= T
to T
low
high
Input Offset Current (V
= 0 V)
I
nA
V/mV
V
CM
IO
T
T
A
= +25°C
—
—
5.0
—
20
40
A
= T
to T
low
high
Large Signal Voltage Gain (V = ±10 V< R = 10 k)
A
VOL
O
L
T
T
A
= +25°C
50
25
500
—
—
—
A
= T
to T
low
high
Output Voltage Swing
V
OH
V
CC
V
CC
V
CC
= +5.0 V, V
= +15 V, V
= +15 V, V
= 0 V, R = 10 k, T = +25°C
= –15 V, R = 10 k, T = +25°C
= –15 V, R = 10 k, T = T
3.5
13.6
13.3
4.3
14.2
—
—
—
—
EE
EE
EE
L
A
L
L
A
A
to T
low
high
high
V
CC
V
CC
V
CC
= +5.0 V, V
= +15 V, V
= +15 V, V
= 0 V, R = 10 k, T = +25°C
= –15 V, R = 10 k, T = +25°C
= –15 V, R = 10 k, T = T to T
low
V
—
—
—
0.05
–14.2
—
0.15
–13.6
–13.3
EE
EE
EE
L
A
OL
L A
L
A
Output Short Circuit (T = +25°C)
Input Overdrive = 1.0 V, Output to Ground
I
mA
V
A
SC
Source
Sink
3.0
15
5.0
27
—
—
Input Common Mode Voltage Range
V
ICR
T
T
A
= +25°C
V
V
to (V
–1.8)
–2.2)
A
EE
EE
CC
CC
= T
to T
to (V
low
high
Common Mode Rejection Ratio (R ≤ 10 k) T = +25°C
CMRR
PSRR
80
80
90
—
—
dB
dB
µA
S
A
Power Supply Rejection Ratio (R = 100 Ω) T = +25°C
100
S
A
Power Supply Current (Per Amplifier)
I
D
V
CC
V
CC
V
CC
= +5.0 V, V
= +15 V, V
= +15 V, V
= 0 V, T = +25°C
—
—
—
180
220
—
250
250
300
EE
EE
EE
A
= –15 V, T = +25°C
A
= –15 V, T = T
to T
high
A
low
NOTE: 3. T
low
= –40°C
T
= +85°C
high
3
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
AC ELECTRICAL CHARACTERISTICS (V
CC
= +15 V, V
= –15 V, R connected to ground, T = +25°C, unless otherwise noted.)
EE
L
A
Characteristics
Symbol
Min
Typ
Max
Unit
Slew Rate (V = –10 V to +10 V, R = 10 k, C = 100 pF)
SR
V/µs
in
L
L
A
+1
–1
1.6
—
2.1
2.1
—
—
V
A
V
Gain Bandwidth Product (f = 100 kHz)
GBW
BWp
1.4
—
1.8
35
—
—
MHz
kHz
Power Bandwidth
A
V
= +1.0 R = 10 k, V = 20 V , THD = 5%
pp
L
O
Phase Margin
φ
m
Degree
s
R
R
= 10 k
= 10 k, C = 100 pF
—
—
60
45
—
—
L
L
L
Gain Margin
A
m
dB
R
R
= 10 k
= 10 k, C = 100 pF
—
—
15
5.0
—
—
L
L
L
Equivalent Input Noise Voltage
= 100 Ω, f = 1.0 kHz
e
I
—
32
—
nV/√Hz
n
R
S
Equivalent Input Noise Current (f = 1.0 kHz)
—
—
0.2
—
—
pA/ √ Hz
MΩ
n
Differential Input Resistance
R
300
in
V
cm
= 0 V
Input Capacitance
C
—
—
0.8
—
—
pF
%
i
Total Harmonic Distortion
THD
0.03
A
V
= +10, R = 10 k, 2.0 V ≤ V ≤ 20 V , f = 10 kHz
L
pp pp
O
Channel Separation (f = 10 kHz)
Open Loop Output Impedance (f = 1.0 MHz)
CS
—
—
120
100
—
—
dB
z
Ω
o
Figure 1. Input Common Mode Voltage Range
versus Temperature
Figure 2. Split Supply Output Saturation
versus Load Current
0
–0.8
–1.6
–2.4
0
V
/V
∆
=
±
1.5 V to
±22 V
CC EE
V
/V
=
±
= 25
5.0 V to
°C
±22 V
V
CC EE
CC
V
CC
V
= 5.0 mV
IO
T
A
–1.0
Source
1.0
0
0.1
0
Sink
V
EE
V
EE
–55
–25
0
25
50
75
C)
100
125
0
1.0
2.0
I , LOAD CURRENT (±mA)
3.0
4.0
T , AMBIENT TEMPERATURE (
°
A
L
4
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
Figure 3. Open Loop Voltage Gain and
Figure 4. Phase Margin and Percent
Overshoot versus Load Capacitance
Phase versus Frequency
3
0
70
60
70
60
120
140
20
V
/V = ±15 V
= +1.0
= 10 k
CC EE
Gain
Margin
= 15 dB
φm
50
40
30
20
10
0
Phase
50
40
30
20
10
A
R
VOL
1
10
Margin
= 58
L
°
∆
V
= 20 mV
160
180
O pp
2
V
R
/V = ±15 V
= 10 k
= 0 V
= 25°C
T
= 25°C
CC EE
L
0
A
4
V
out
3
–10
–20
–30
%
T
A
1 — Phase
200
220
2 — Phase, C = 100 pF
3 — Gain
4 — Gain, C = 100 pF
L
L
0
1.0 k
100 k
1.0 M
f, FREQUENCY (Hz)
10 M
10
20
50
100
200
500
C , LOAD CAPACITANCE (pF)
L
Figure 5. Normalized Gain Bandwidth Product
and Slew Rate versus Temperature
Figure 6. Small and Large Signal
Transient Response
5.0 µs/DIV
1.3
1.2
V
R
/V = ±15 V
= 10 k
CC EE
L
V
V
V
/V
=
±
15 V
GBW
CC EE
= 0 V
= 0 V
CM
1.1
1.0
0.9
0.8
0
O
∆
I
= ±0.5 mA
= 25°C
O
T
A
SR
0
0.7
–55
–25
0
25
50
75
C)
100
125
5.0 µs/DIV
T , AMBIENT TEMPERATURE (
°
A
Figure 7. Output Impedance and Frequency
Figure 8. Supply Current versus Supply Voltage
140
120
100
80
1.1
0.9
0.7
0.5
1. T = –55
°
C
C
C
V
A
R
/V
= +1.0
= 10 k
= 100 pF
= 25
=
±
15 V
1
2
A
CC EE
V
L
L
Quad
2. T = 25
3. T = 125°
°
A
A
= 1000
V
A
C
3
T
°C
A
A
= 100
V
Dual
1
2
3
60
40
20
0
A
= 10
A = 1.0
V
V
Single
0.3
0.1
1
2
3
200
2.0 k
20 k
f, FREQUENCY (Hz)
200 k
2.0 M
0
5.0
10
15
20
25
V
/V , SUPPLY VOLTAGE (±V)
CC EE
5
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
APPLICATIONS INFORMATION – CIRCUIT DESCRIPTION/PERFORMANCE FEATURES
Although the bandwidth, slew rate, and settling time of the
voltage to approach within millivolts of V . For sink currents
EE
MC33171/72/74 amplifier family is similar to low power op
amp products utilizing JFET input devices, these amplifiers
offer additional advantages as a result of the PNP transistor
differential inputs and an all NPN transistor output stage.
Because the input common mode voltage range of this
(> 0.4 mA), diode D3 clamps the voltage across R4. Thus the
negative swing is limited by the saturation voltage of Q15,
plus the forward diode drop of D3 (≈V
+1.0 V). Therefore
EE
an unprecedented peak–to–peak output voltage swing is
possible for a given supply voltage as indicated by the output
swing specifications.
input stage includes the V
operation is feasible to as low as 3.0 V with the common
mode input voltage at ground potential.
potential, single supply
EE
If the load resistance is referenced to V
instead of
CC
ground for single supply applications, the maximum possible
output swing can be achieved for a given supply voltage. For
light load currents, the load resistance will pull the output to
The input stage also allows differential input voltages up to
±44 V, provided the maximum input voltage range is not
exceeded. Specifically, the input voltages must range
V
during the positive swing and the output will pull the load
CC
between V
and V
supply voltages as shown by the
resistance near ground during the negative swing. The load
resistance value should be much less than that of the
feedback resistance to maximize pull–up capability.
CC
EE
maximum rating table. In practice, although not
recommended, the input voltages can exceed the V
CC
voltage by approximately 3.0 V and decrease below the V
EE
voltage by 0.3 V without causing product damage, although
output phase reversal may occur. It is also possible to source
Because the PNP output emitter–follower transistor has
been eliminated, the MC33171/72/74 family offers a 15 mA
minimum current sink capability, typically to an output voltage
up to 5.0 mA of current from V
through either inputs’
of (V
+1.8 V). In single supply applications the output can
EE
EE
clamping diode without damage or latching, but phase
reversal may again occur. If at least one input is within the
common mode input voltage range and the other input is
within the maximum input voltage range, no phase reversal
will occur. If both inputs exceed the upper common mode
input voltage limit, the output will be forced to its lowest
voltage state.
directly source or sink base current from a common emitter
NPN transistor for current switching applications.
In addition, the all NPN transistor output stage is inherently
faster than PNP types, contributing to the bipolar amplifier’s
improved gain bandwidth product. The associated high
frequency low output impedance (200 Ω typ @ 1.0 MHz)
allows capacitive drive capability from 0 pF to 400 pF without
oscillation in the noninverting unity gain configuration. The
60°C phase margin and 15 dB gain margin, as well as the
general gain and phase characteristics, are virtually
independent of the source/sink output swing conditions. This
allows easier system phase compensation, since output
swing will not be a phase consideration. The AC
characteristics of the MC33171/72/74 family also allow
excellent active filter capability, especially for low voltage
single supply applications.
Although the single supply specification is defined at 5.0 V,
these amplifiers are functional to at least 3.0 V @ 25°C.
However slight changes in parametrics such as bandwidth,
slew rate, and DC gain may occur.
If power to this integrated circuit is applied in reverse
polarity, or if the IC is installed backwards in a socket, large
unlimited current surges will occur through the device that
may result in device destruction.
As usual with most high frequency amplifiers, proper lead
dress, component placement and PC board layout should
be exercised for optimum frequency performance. For
example, long unshielded input or output leads may result in
unwanted input/output coupling. In order to preserve the
relatively low input capacitance associated with these
amplifiers, resistors connected to the inputs should be
immediately adjacent to the input pin to minimize additional
stray input capacitance. This not only minimizes the input
pole for optimum frequency response, but also minimizes
extraneous “pick up” at this node. Supply decoupling with
adequate capacitance immediately adjacent to the supply pin
is also important, particularly over temperature, since many
types of decoupling capacitors exhibit great impedance
changes over temperature.
Since the input capacitance associated with the small
geometry input device is substantially lower (0.8 pF) than that
of a typical JFET (3.0 pF), the frequency response for a given
input source resistance is greatly enhanced. This becomes
evident in D–to–A current to voltage conversion applications
where the feedback resistance can form a pole with the input
capacitance of the op amp. This input pole creates a 2nd
Order system with the single pole op amp and is therefore
detrimental to its settling time. In this context, lower input
capacitance is desirable especially for higher values of
feedback resistances (lower current DACs). This input pole
can be compensated for by creating a feedback zero with a
capacitance across the feedback resistance, if necessary, to
reduce overshoot. For 10 kΩ of feedback resistance, the
MC33171/72/74 family can typically settle to within 1/2 LSB
of 8 bits in 4.2 µs, and within 1/2 LSB of 12 bits in 4.8 µs for
a 10 V step. In a standard inverting unity gain fast settling
configuration, the symmetrical slew rate is typically
± 2.1 V/µs. In the classic noninverting unity gain
configuration the typical output positive slew rate is also
2.1 V/µs, and the corresponding negative slew rate will
usually exceed the positive slew rate as a function of the fall
time of the input waveform.
The all NPN output stage, shown in its basic form on the
equivalent circuit schematic, offers unique advantages over
the more conventional NPN/PNP transistor Class AB output
stage. A 10 kΩ load resistance can typically swing within 0.8 V
of the positive rail (V ) and negative rail (V ), providing a
CC
EE
28.4 Vpp swing from ±15 V supplies. This large output swing
becomes most noticeable at lower supply voltages.
The positive swing is limited by the saturation voltage of
the current source transistor Q7, the V
of the NPN pull–up
BE
transistor Q17, and the voltage drop associated with the
short circuit resistance, R5. For sink currents less than
0.4 mA, the negative swing is limited by the saturation
voltage of the pull–down transistor Q15, and the voltage drop
across R4 and R5. For small valued sink currents, the above
voltage drops are negligible, allowing the negative swing
The output of any one amplifier is current limited and thus
protected from a direct short to ground. However, under such
conditions, it is important not to allow the device to exceed
the maximum junction temperature rating. Typically for ±15 V
supplies, any one output can be shorted continuously to
ground without exceeding the maximum temperature rating.
6
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
Figure 9. AC Coupled Noninverting Amplifier
Figure 10. AC Coupled Inverting Amplifier
with Single +5.0 V Supply
with Single +5.0 V Supply
V
CC
2.2 k
510 k
V
CC
100 k
3.6 Vpp
3.8 Vpp
V
0
V
0
O
O
100 k
C
in
C
O
+
–
100 k
V
C
O
O
+
–
10 k
V
O
100 k
= 101
RL
100 k
V
in
10 k
C
in
RL
100 k
1.0 k
V
in
A
V
A
V
= 10
BW ( –3.0 dB) = 20 kHz
BW ( –3.0 dB) = 200 kHz
Figure 11. DC Coupled Inverting Amplifier
Maximum Output Swing with Single
+5.0 V Supply
Figure 12. Offset Nulling Circuit
V
CC
100 k
V
CC
50 k
7
3
2
+
4.7 k
R
6
5
L
+
–
V
–
O
1
4
10 k
1.0 M
100 k
V
4.2 Vpp
EE
V
2.5 V
O
V
in
Offset Nulling range is approximately
a 10 k potentiometer, MC33171 only.
±80 mV with
A
= 10
V
BW ( –3.0 dB) = 200 kHz
Figure 13. Active High–Q Notch Filter
Figure 14. Active Bandpass Filter
V
CC
V
≥
0.2 Vdc
16 k
in
f
= 30 kHz
o
C
R3
2.2 k
Q = 10
= 1.0
–
+
0.047
16 k
R
V
R1
1.1 k
H
O
O
V
in
–
R
0.01
V
in
V
O
C
C
+
0.047
R2
5.6 k
f
f
= 1.0 kHz
o
0.4
2C
0.02
2C
0.02
2R
32 k
R1 R3
V
R3
CC
1
=
R2 =
Then:
R1 =
R3 =
2
o
4Q R1 –R3
2 H
O
4
π RC
Q
f
o
GBW
Q
o
Given f = center frequency
o
< 0.1
A
= Gain at center frequency
π
f C
o
o
Choose Value f , Q, A , C
o
o
For less than 10% error for operational amplifier, where f and GBW are expressed in Hz.
o
7
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
OUTLINE DIMENSIONS
P SUFFIX
PLASTIC PACKAGE
CASE 626–05
ISSUE K
NOTES:
1. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
2. PACKAGE CONTOUR OPTIONAL (ROUND OR
SQUARE CORNERS).
8
5
3. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
–B–
MILLIMETERS
INCHES
1
4
DIM
A
B
C
D
F
G
H
J
K
L
M
N
MIN
9.40
6.10
3.94
0.38
1.02
MAX
10.16
6.60
4.45
0.51
1.78
MIN
MAX
0.400
0.260
0.175
0.020
0.070
0.370
0.240
0.155
0.015
0.040
F
–A–
NOTE 2
L
2.54 BSC
0.100 BSC
0.76
0.20
2.92
7.62 BSC
–––
1.27
0.30
3.43
0.030
0.008
0.115
0.300 BSC
–––
0.050
0.012
0.135
C
10
1.01
10
0.040
0.76
0.030
J
M
–T–
SEATING
PLANE
N
D
K
G
H
M
M
M
0.13 (0.005)
T
A
B
D SUFFIX
PLASTIC PACKAGE
CASE 751–05
(SO–8)
ISSUE R
NOTES:
D
A
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
C
2. DIMENSIONS ARE IN MILLIMETERS.
3. DIMENSION D AND E DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE MOLD
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE B DIMENSION AT MAXIMUM MATERIAL
CONDITION.
8
1
5
4
M
M
0.25
B
H
E
h X 45
MILLIMETERS
B
e
DIM
A
A1
B
C
D
E
e
H
h
MIN
1.35
0.10
0.35
0.18
4.80
3.80
MAX
1.75
0.25
0.49
0.25
5.00
4.00
A
C
SEATING
PLANE
L
1.27 BSC
0.10
5.80
0.25
0.40
0
6.20
0.50
1.25
7
A1
B
L
M
S
S
0.25
C
B
A
8
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
OUTLINE DIMENSIONS
P SUFFIX
PLASTIC PACKAGE
CASE 646–06
ISSUE L
NOTES:
1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE
POSITION AT SEATING PLANE AT MAXIMUM
MATERIAL CONDITION.
2. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
3. DIMENSION B DOES NOT INCLUDE MOLD
FLASH.
4. ROUNDED CORNERS OPTIONAL.
14
1
8
7
B
INCHES
MILLIMETERS
A
F
DIM
A
B
C
D
F
G
H
J
K
L
M
N
MIN
MAX
0.770
0.260
0.185
0.021
0.070
MIN
18.16
6.10
3.69
0.38
1.02
MAX
19.56
6.60
4.69
0.53
1.78
0.715
0.240
0.145
0.015
0.040
L
C
0.100 BSC
2.54 BSC
0.052
0.008
0.115
0.095
0.015
0.135
1.32
0.20
2.92
2.41
0.38
3.43
J
N
0.300 BSC
7.62 BSC
SEATING
PLANE
K
0
10
0
10
0.015
0.039
0.39
1.01
H
G
D
M
D SUFFIX
PLASTIC PACKAGE
CASE 751A–03
(SO–14)
ISSUE F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
–A–
14
8
7
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
–B–
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
P 7 PL
M
M
0.25 (0.010)
B
1
MILLIMETERS
INCHES
G
DIM
A
B
C
D
F
G
J
K
M
P
MIN
8.55
3.80
1.35
0.35
0.40
MAX
8.75
4.00
1.75
0.49
1.25
MIN
MAX
0.344
0.157
0.068
0.019
0.049
F
R X 45
C
0.337
0.150
0.054
0.014
0.016
–T–
SEATING
PLANE
J
M
1.27 BSC
0.050 BSC
K
D 14 PL
0.19
0.10
0
0.25
0.25
7
0.008
0.004
0
0.009
0.009
7
M
S
S
0.25 (0.010)
T
B
A
5.80
0.25
6.20
0.50
0.228
0.010
0.244
0.019
R
9
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
NOTES
10
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
NOTES
11
MOTOROLA ANALOG IC DEVICE DATA
MC33171 MC33172 MC33174
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specificallydisclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
datasheetsand/orspecificationscananddovaryindifferentapplicationsandactualperformancemayvaryovertime. Alloperatingparameters,including“Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applicationsintended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
ordeathmayoccur. ShouldBuyerpurchaseoruseMotorolaproductsforanysuchunintendedorunauthorizedapplication,BuyershallindemnifyandholdMotorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
Opportunity/Affirmative Action Employer.
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MC33171/D
◊
1 of 2
Register | Site Index | Contact Us | Home | China
Site
Press Room
Product Quick Links
Sales & Distribution
About Us
Quality
Associated Documents
Trade Shows
Investor Relations
Item
Short Desc
S
Employment
Products
Data Sheet
Low Power, Single Supply Operational Amplifier
2
Product Catalog
New Products
ON/Cherry Products
Documentation
Selector Guide
On-line Ordering
Models
Reliability Data
PCN
Samples Search
Order Status
Tech Support
Device MC33172
Low Power, Single Supply Operational Amplifier
Quality bipolar fabrication with innovative design concepts are employed for the MC
monolithic operational amplifiers. These devices operate at 180 µA per amplifier an
bandwidth product and 2.1 V/µs slew rate without the use of JFET device technolo
can be operated from split supplies, it is particularly suited for single supply operati
mode input voltage includes ground potential (VEE). With a Darlington input stage,
input resistance, low input offset voltage and high gain. The all NPN output stage, c
deadband crossover distortion and large output voltage swing, provides high capac
excellent phase and gain margins, low open loop high frequency output impedance
source/sink AC frequency response.
The MC33171/72/74 are specified over the industrial/ automotive temperature rang
of single, dual and quad operational amplifiers are available in plastic as well as the
packages.
Features:
l Low Supply Current: 180 µA (Per Amplifier)
l Wide Supply Operating Range: 3.0 V to 44 V or 1.5 V to 22 V
l Wide Input Common Mode Range, Including Ground (VEE
)
l Wide Bandwidth: 1.8 MHz
l High Slew Rate: 2.1 V/µs
l Low Input Offset Voltage: 2.0 mV
l Large Output Voltage Swing: -14.2 V to +14.2 V (with 15 V Supplies)
2 of 2
l Low Total Harmonic Distortion: 0.03%
l Excellent Phase Margin: 60 C
l Excellent Gain Margin: 15 dB
l Output Short Circuit Protection
l ESD Diodes Provide Input Protection for Dual and Quad
Orderable Parts
Short
Desc.
Package Pin
Case
Action Orderable Part
Status
Desc.
Count Outline
N/A
MC33172D
Low
Power,
Single
SOIC
8
751-06 Active
Supply
Operational
Amplifier
N/A
N/A
MC33172DR2
MC33172P
Tape and
Reel
SOIC
PDIP
8
8
751-06 Active
626-05 Active
Low
Power,
Single
Supply
Operational
Amplifier
N/A
N/A
MC33172VD
Low
Power,
Single
Supply
Operational
Amplifier
SOIC
SOIC
8
8
751-06 Active
751-06 Active
MC33172VDR2 Tape and
Reel
Register | Site Index | Contact Us | Home | China Site
Products | Press Room | Sales | About | Investor | Employment
© Semiconductor Components Industries, L.L.C., 1999, 2000. All rights reserved. Terms of use.
1 of 3
Register | Site Index | Contact Us | Home | China
Site
Press Room
Product Quick Links
Sales & Distribution
About Us
Quality
Associated Documents
Trade Shows
Investor Relations
Item
Short Desc
S
Employment
Products
Data Sheet
Low Power, Single Supply Operational Amplifier
2
Product Catalog
New Products
ON/Cherry Products
Documentation
Selector Guide
On-line Ordering
Models
Reliability Data
PCN
Samples Search
Order Status
Tech Support
Device MC33174
Low Power, Single Supply Operational Amplifier
Quality bipolar fabrication with innovative design concepts are employed for the MC
operational amplifiers. These devices operate at 180 µA per amplifier and offer 1.8
2.1 V/µs slew rate without the use of JFET device technology. Although this series
it is particularly suited for single supply operation, since the common mode input vo
(VEE). With a Darlington input stage, these devices exhibit high input resistance, lo
The all NPN output stage, characterized by no deadband crossover distortion and
high capacitance drive capability, excellent phase and gain margins, low open loop
and symmetrical source/sink AC frequency response.
The MC33171/72/74 are specified over the industrial/ automotive temperature rang
dual and quad operational amplifiers are available in plastic as well as the surface
Features:
l Low Supply Current: 180 µA (Per Amplifier)
l Wide Supply Operating Range: 3.0 V to 44 V or 1.5 V to 22 V
l Wide Input Common Mode Range, Including Ground (VEE
)
l Wide Bandwidth: 1.8 MHz
l High Slew Rate: 2.1 V/µs
l Low Input Offset Voltage: 2.0 mV
l Large Output Voltage Swing: -14.2 V to +14.2 V (with 15 V Supplies)
l Large Capacitance Drive Capability: 0 pF to 500 pF
l Low Total Harmonic Distortion: 0.03%
2 of 3
l Excellent Gain Margin: 15 dB
l Output Short Circuit Protection
l ESD Diodes Provide Input Protection for Dual and Quad
Orderable Parts
Short
Desc.
Package Pin
Case
Action
Orderable Part
Desc.
Count Outline
N/A
MC33174DTB
Low
Power,
Single
TSSOP
14
948G-01
Supply
Operational
Amplifier
N/A
MC33174D
Low
Power,
Single
SOIC
14
751A-03
Supply
Operational
Amplifier
N/A
N/A
MC33174DR2
Tape and
Reel
SOIC
14
14
14
751A-03
948G-01
646-06
MC33174DTBR2 Tape and
Reel
TSSOP
PDIP
Order Samples MC33174P
Low
Power,
Single
Supply
Operational
Amplifier
N/A
MC33174VD
Low
Power,
Single
N/A
N/A
N/A
Supply
Operational
Amplifier
N/A
N/A
MC33174VDR2
MC33174VDW
Tape and
Reel
SOIC
N/A
14
751A-03
N/A
Low
Power,
Single
N/A
Supply
Operational
Amplifier
N/A
MC33174VP
Low
Power,
Single
PDIP
14
646-06
Supply
Operational
Amplifier
3 of 3
Register | Site Index | Contact Us | Home | China Site
Products | Press Room | Sales | About | Investor | Employment
© Semiconductor Components Industries, L.L.C., 1999, 2000. All rights reserved. Terms of use.
相关型号：
MC33174VDG
Operational Amplifier, Single Supply 3.0 V to 44 V, Low Power, Quad, SOIC-14 NB, 55-TUBE
ONSEMI
MC33174VDW
Operational Amplifier, 4 Func, 6500uV Offset-Max, BIPolar, PDSO14, PLASTIC, SO-14
MOTOROLA
©2020 ICPDF网 联系我们和版权申明