AWK-4131A [MOXA]
Outdoor industrial IEEE 802.11a/b/g/n wireless AP/bridge/client;
| 型号： | AWK-4131A |
| 厂家： | 
Moxa |
| 描述： | Outdoor industrial IEEE 802.11a/b/g/n wireless AP/bridge/client |
| 文件： | 总7页 (文件大小：974K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AWK-4131A Series
Outdoor industrial IEEE 802.11a/b/g/n wireless AP/bridge/client
Features and Benefits
• 2x2 MIMO 802.11a/b/g/n AP/bridge/client
1
• Millisecond-level Client-based Turbo Roaming
• Easy setup and deployment with AeroMag
• Wireless redundancy with AeroLink Protection
• Easy network setup with Network Address Translation (NAT)
• Rugged industrial design with integrated antenna and power isolation
• IP68-rated weatherproof housing designed for outdoor applications and -40
to 75°C wide operating temperature range
• Avoid wireless congestion with 5 GHz DFS channel support
Certifications
Introduction
The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n
technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards
and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the
reliability of the power supply, and the AWK-4131A can be powered via PoE to make deployment easier. The AWK-4131A can operate on either the
2.4 GHz or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.
Advanced 802.11n Industrial Wireless Solution
• 802.11a/b/g/n compliant AP/bridge/client for flexible deployment
• Software-optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5
GHz)
• Supports 60 clients connected concurrently
• DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure
Advanced Wireless Technology for Mission-critical Applications
• Seamless roaming with client-based Turbo Roaming1 for < 150 ms roaming recovery time between APs (Client mode)
• AeroMag support for error-free setup of your industrial applications’ basic WLAN settings
• Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients
Industrial Ruggedness
• Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference
• IP68-rated metal casing for complete ingress protection for any outdoor weather
• -40 to 75°C wide operating temperature models available for smooth wireless communication in harsh environments
Specifications
WLAN Interface
WLAN Standards
802.11a/b/g/n
802.11i Wireless Security
Modulation Type
DSSS
OFDM
MIMO-OFDM
1.
The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free
20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load.
Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
1
www.moxa.com
Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)2
5.500 to 5.700 GHz (11 channels)2
5.745 to 5.825 GHz (5 channels)
Frequency Band for EU (20 MHz operating channels)
Frequency Band for JP (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)2
5.500 to 5.700 GHz (11 channels)2
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.240 GHz (4 channels)2
5.500 to 5.700 GHz (11 channels)2
Wireless Security
WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal
Transmission Rate
802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
Transmitter Power for 802.11a
23 1.5 dBm @ 6 to 24 Mbps
21 1.5 dBm @ 36 Mbps
20 1.5 dBm @ 48 Mbps
18 1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (5 GHz)
Transmitter Power for 802.11b
Transmitter Power for 802.11g
Transmitter Power for 802.11n (2.4 GHz)
Transmitter Power
23 1.5 dBm @ MCS0/8 20 MHz
18 1.5 dBm @ MCS7/15 20 MHz
23 1.5 dBm @ MCS0/8 40 MHz
17 1.5 dBm @ MCS7/15 40 MHz
26 1.5 dBm @ 1 Mbps
26 1.5 dBm @ 2 Mbps
26 1.5 dBm @ 5.5 Mbps
25 1.5 dBm @ 11 Mbps
23 1.5 dBm @ 6 to 24 Mbps
21 1.5 dBm @ 36 Mbps
19 1.5 dBm @ 48 Mbps
18 1.5 dBm @ 54 Mbps
23 1.5 dBm @ MCS0/8 20 MHz
18 1.5 dBm @ MCS7/15 20 MHz
23 1.5 dBm @ MCS0/8 40 MHz
17 1.5 dBm @ MCS7/15 40 MHz
US
EU
JP
2.4 GHz
26 dBm
23 dBm
23 dBm
23 dBm
23 dBm
18 dBm
21 dBm
21 dBm
23 dBm
–
18 dBm
21 dBm
21 dBm
23 dBm
–
5 GHz (UNII-1)
5 GHz (UNII-2)
5 GHz (UNII-2e)
5 GHz (UNII-3)
Note: Based on regional regulations, the maximum transmission power allowed on
the UNII bands is restricted in the firmware, as indicated above.
Receiver Sensitivity for 802.11a (measured at 5.680
GHz)
Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Typ. -85 @ 18 Mbps
2.
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.
However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
2
www.moxa.com
Typ. -81 @ 24 Mbps
Typ. -78 @ 36 Mbps
Typ. -74 @ 48 Mbps
Typ. -72 @ 54 Mbps
Note3
Receiver Sensitivity for 802.11n (5 GHz; measured at
5.680 GHz)
Typ. -69 dBm @ MCS7 20 MHz
Typ. -71 dBm @ MCS15 20 MHz
Typ. -63 dBm @ MCS7 40 MHz
Typ. -68 dBm @ MCS15 40 MHz
Note3
Receiver Sensitivity for 802.11b (measured at 2.437
GHz)
Typ. -93 dBm @ 1 Mbps
Typ. -93 dBm @ 2 Mbps
Typ. -93 dBm @ 5.5 Mbps
Typ. -88 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g (measured at 2.437
GHz)
Typ. -88 dBm @ 6 Mbps
Typ. -86 dBm @ 9 Mbps
Typ. -85 dBm @ 12 Mbps
Typ. -85 dBm @ 18 Mbps
Typ. -85 dBm @ 24 Mbps
Typ. -82 dBm @ 36 Mbps
Typ. -78 dBm @ 48 Mbps
Typ. -74 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz; measured
at 2.437 GHz)
Typ. -70 dBm @ MCS7 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -67 dBm @ MCS7 40 MHz
Typ. -67 dBm @ MCS15 40 MHz
WLAN Operation Mode
Antenna
Access point, Client, Client-Router, Master, Slave, Sniffer
External, 3/6 dBi, Omni-directional
2 N-type female
WLAN Antenna Connector
Ethernet Interface
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for PoE
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
PoE Ports (10/100/1000BaseT(X), RJ45 connector)
1
Ethernet Software Features
Management
DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3,
Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXconfig
Routing
Static Route, NAT, Port forwarding
RSTP, STP
Redundancy Protocols
Security
HTTPS/SSL, RADIUS, SSH
SNTP Client
Time Management
Firewall
Filter
ICMP, MAC address, IP protocol, Port-based
RS-232, 8-pin RJ45
Serial Interface
Console Port
3.
Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
3
www.moxa.com
LED Interface
LED Indicators
PWR, FAULT, STATE, WLAN, LAN
Input/Output Interface
Alarm Contact Channels
Relay output with current carrying capacity of 1 A @ 24 VDC
Reset button
Buttons
Digital Inputs
+13 to +30 V for state 1
+3 to -30 V for state 0
Max. input current: 8 mA
Physical Characteristics
Housing
Metal
IP Rating
Dimensions
Weight
IP68
224 x 147.7 x 66.5 mm (8.82 x 5.82 x 2.62 in)
1,400 g (3.09 lb)
Installation
Wall mounting (standard), DIN-rail mounting (optional), Pole mounting (optional)
Power Parameters
Input Current
0.64 A @ 12 VDC, 0.16 A @ 48 VDC
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
M12 A-coded 5-pin male connector
7.68 W (max.)
Input Voltage
Power Connector
Power Consumption
Reverse Polarity Protection
Supported
Environmental Limits
Operating Temperature
-40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
Storage Temperature (package included)
Ambient Relative Humidity
Standards and Certifications
EMC
EN 61000-6-2/-6-4
EMI
CISPR 32, FCC Part 15B Class B
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Radio
EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC,
RCM, SRRC, WPC, KC
Safety
EN 60950-1, UL 60950-1
IEC 60068-2-6
Vibration
MTBF
Time
440,764 hrs
Standards
Telcordia SR332
4
www.moxa.com
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x AWK-4131A Series wireless AP/bridge/client
Installation Kit
1 x cap, female, metal, for M12 port
1 x cap, metal, for RJ45 port
1 x field-installable power plug
1 x field-installable RJ45 plug
1 x stick, transparent plastic, for field-installable plug
2 x wall-mounting kit
Antenna
2 x 2.4/5 GHz antenna
Documentation
1 x quick installation guide
1 x warranty card
Dimensions
Ordering Information
Model Name
Band
EU
Standards
Operating Temp.
-40 to 75°C
AWK-4131A-EU-T
AWK-4131A-JP-T
AWK-4131A-US-T
802.11a/b/g/n
802.11a/b/g/n
802.11a/b/g/n
JP
-40 to 75°C
US
-40 to 75°C
5
www.moxa.com
Accessories (sold separately)
Antennas
ANT-WDB-ANF-0407
ANT-WDB-ANF-0609
ANT-WDB-ANM-0306
ANT-WDB-ANM-0407
ANT-WDB-ANM-0502
ANT-WDB-ANM-0609
ANT-WDB-ARM-02
2.4/5 GHz, omni-directional antenna, 4/7 dBi, N-type (female)
2.4/5 GHz, omni-directional antenna, 6/9 dBi, N-type (female)
2.4/5 GHz, omni-directional antenna, 3/6 dBi, N-type (male)
2.4/5 GHz, dual-band omni-directional antenna, 4/7 dBi, N-type (male)
2.4/5 GHz, omni-directional antenna, 5/2 dBi, N-type (male)
2.4/5 GHz, omni-directional antenna, 6/9 dBi, N-type (male)
2.4/5 GHz, omni-directional rubber duck antenna, 2 dBi, RP-SMA (male)
2.4/5 GHz, panel antenna, 2/2 dBi, RP-SMA (male)
ANT-WDB-ARM-0202
ANT-WDB-PNF-1518
MAT-WDB-CA-RM-2-0205
MAT-WDB-DA-RM-2-0203-1m
MAT-WDB-PA-NF-2-0708
ANT-WSB5-ANF-12
2.4/5 GHz, panel antenna, 15/18 dBi, N-type (female)
2.4/5 GHz, ceiling antenna, 2/5 dBi, MIMO 2x2, RP-SMA-type (male)
2.4/5 GHz, desktop antenna, 2/3 dBi, MIMO 2x2, RP-SMA-type (male), 1 m cable
2.4/5 GHz, panel antenna, 7/8 dBi, MIMO 2x2, N-type (female)
5 GHz, omni-directional antenna, 12 dBi, N-type (female)
ANT-WSB5-PNF-18
5 GHz, directional panel antenna, 18 dBi, N-type (female)
2.4 GHz, omni-directional antenna, 9 dBi, N-type (female)
2.4 GHz, directional panel antenna, 12dBi, N-type (female)
2.4 GHz, directional panel antenna, 18 dBi, N-type (female)
2.4 GHz, omni-directional/dipole antenna, 5 dBi, RP-SMA (male), 1.5 m cable
ANT-WSB-ANF-09
ANT-WSB-PNF-12
ANT-WSB-PNF-18
ANT-WSB-AHRM-05-1.5m
Wireless Antenna Cables
A-CRF-NMNM-LL4-300
A-CRF-NMNM-LL4-600
A-CRF-NMNM-LL4-900
CRF-N0429N-3M
N-type (male) to N-type (male), LMR-400 Lite cable, 3 m
N-type (male) to N-type (male), LMR-400 Lite cable, 6 m
N-type (male) to N-type (male), LMR-400 Lite cable, 9 m
N-type (male) to N-type (male), CFD400 cable, 3 m
Wireless AP Connector Cables
M12A-8PFF-IP68
Field-installation A-coded M12 screw-in 8-pin connector, female connector female PIN
Field-installation A-coded screw-in Gigabit Ethernet connector, 8-pin male M12 connector, IP68-rated
Field-installation RJ-type plug
M12A-8PMM-IP68
A-PLG-WPRJ
Wireless Connector Caps
A-CAP-N-M
Metal cap to cover N-type connector
Metal cap with chain for RJ45 connector
A-CAP-WPRJ45-MC
Surge Arrestors
A-SA-NMNF-01
A-SA-NFNF-01
Surge arrester, N-type (female) to N-type (male)
Surge arrestor, N-type (female) to N-type (female)
Wireless Adapters
A-ADP-RJ458P-DB9F-ABC01
DB9 female to RJ45 connector for the ABC-01
Terminating Resistor, 50 ohm, RP-SMA Male
Wireless Terminating Resistors
A-TRM-50-NM
Wall-Mounting Kits
6
www.moxa.com
WK-51-01
Wall-mounting kit, 2 plates, 6 screws, 51.6 x 67 x 2 mm
Wall-mounting kit, 55 x 34.5 x 2.5 mm
Wireless AP Mounting Kits
WK-55
© Moxa Inc. All rights reserved. Updated Mar 11, 2020.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
7
www.moxa.com
相关型号：
AWK105BJ105MP8F
LW Reversal Decoupling Capacitors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (LWDCâ¢)
TAIYO YUDEN
AWK105C6474MP8F
LW Reversal Decoupling Capacitors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (LWDCâ¢)
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明