IEC-G102-BP-PRO-T [MOXA]
2-port Gigabit industrial Intrusion Prevention System (IPS) device;
| 型号： | IEC-G102-BP-PRO-T |
| 厂家： | 
Moxa |
| 描述： | 2-port Gigabit industrial Intrusion Prevention System (IPS) device |
| 文件： | 总4页 (文件大小：1001K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IEC-G102-BP Series
2-port Gigabit industrial Intrusion Prevention System (IPS) device with hardware bypass
Features and Benefits
• Ultra-compact industrial security box with IPS/IDS
• Granular policy enforcement with whitelisting control
• LAN Bypass design to prevent a single point of failure and traffic overloading
• Bump-in-the-wire installation without impacting the network
Certifications
Introduction
The Moxa IEC-G102-BP Series industrial next-generation IPS devices protect mission-critical assets with industrial-grade IPS and whitelisting.
Meanwhile, the Security Dashboard Console (SDC) software, when used together with the IEC-G102-BP Series, offers another layer of protection
through centralized critical asset visibility, network analysis, and auto pattern updating.
Centrally Manage Network Security and Enhance OT Visibility
The IEC-G102–BP Series sniffers network traffic and gives users full visibility of current assets and connections, which helps administrators and
operators understand the real-time conditions of the OT system. When connected to Security Dashboard Console, a security management
platform, the administrators or operators can effectively manage and monitor all the intrusion prevention systems from a single space. This
provides an easier way to monitor the devices and execute policy, firmware, and pattern updates.
Dynamically Prevent Malicious Cyber Threat Activity Affecting Your System
The IEC-G102–BP Series is designed to protect mission-critical assets at the OT network edge. It silently analyzes your network traffic in the
background and offers granular behavior monitoring and control of cyber activities. These IPS devices provide both “Monitor” and “Protect”
modes to facilitate different OT scenarios. Monitoring mode gives administrators full visibility of cyber threat activities. In the case of an
emergency, administrators can easily switch to “Protect” mode to block and contain any malicious operations.
Industrial Protocol Whitelist Control for Mission-critical Assets
Using advanced Deep Packet Inspection (DPI) technology, the IEC-G102–BP Series is equipped with industrial protocol awareness to offer granular
command of control system traffic to critical controllers.
Virtual Patching and Intelligent Threat Protection
Frequent patching significantly reduces a system’s vulnerability to cyberthreats. However, patching continues to be a major challenge in OT
environments because OT applications cannot afford interrupting operations by shutting down systems to apply patches. Virtual patching
technology can help complement existing patch management processes by shielding known and unknown vulnerabilities. Virtual patching acts as
an agentless emergency security tool that OT administrators and operators can use to address vulnerabilities on affected OT equipment quickly.
The IEC-G102–BP Series provides advanced protection against threats with up-to-date threat information and guards your systems against
undisclosed and zero-day threats.
Flexible License Upgrades
The IEC-G102-BP Series supports flexible, on-demand expansion through Moxa’s license platform. As your network grows, you can purchase
additional licenses based on your needs. The IEC-G102-BP Series supports the following licenses:
• IEC-New-1Y: 1-year, 1 node IEC license
• IEC-Renew-1Y: 1-year, 1 node IEC renewal license
• IEC-Renew-2Y: 2-year, 1 node IEC renewal license
• IEC-Renew-4Y: 4-year, 1 node IEC renewal license
• SDC-New-1Y: 1-year, 1 node SDC license
• SDC-New-3Y: 3-year, 1 node SDC license
• SDC-New-5Y: 5-year, 1 node SDC license
• SDC-Renew-1Y: 1-year, 1 node SDC renewal license
• SDC-Add-4Q: 1-year, 1 node SDC add-on license
1
www.moxa.com
Dimensions
Specifications
Input/Output Interface
Buttons
Reset button
Ethernet Interface
10/100/1000BaseT(X) Ports (RJ45 connector)
2
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3u for 100BaseT(X)
LED Interface
LED Indicators
PWR1, PWR2, MANAGED, IPS/IDS, USB/F, BYPASS, 10/100/1000M
DoS and DDoS Protection
Technology
ICMP Flood, IGMP Flood, UDP Flood, TCP SYN Flood, TCP Port SYN Scan, TCP Port
FIN Scan, TCP Port NULL Scan, TCP Port Xmas Scan, UDP Port Scan
Firewall
IPS Throughput
> 200 Mbps
Latency
< 500 microseconds
Deep Packet Inspection
Modbus TCP
Modbus UDP
EtherNet/IP
PROFINET-DCP
CIP
SLMP
Omron FINS
Siemens S7 Comm.
Siemens S7 Comm. Plus
Additional protocols will be supported through future firmware updates.
Policy Enforcement Rules
ICS Protocol Filter Profiles
Concurrent Connections (TCP)
64 rules
32 profiles
10,0000
2
www.moxa.com
Automatic Pattern Updates via SDC
Manual Pattern Updates
Pro Models: Supported (1 year of updates included)
Pro-H Models: Supported (requires IEC pattern update license)
SA Models: Not supported
Pro Models: Supported (1 year of updates included)
Pro-H Models: Supported (requires IEC pattern update license)
SA Models: Supported (while under 5-year warranty)
Management
Supported Interfaces
Web GUI and Security Dashboard Console
Real-Time Firewall / VPN Event Log
Event Type
Cybersecurity, Policy enforcement, Protocol Filter, Assets detection, System event
Local storage, Syslog server
Media
Serial Interface
Console Port
USB Type-C
Power Parameters
Connection
Removable terminal block
Input Current
0.605 A @ 12 VDC, 0.297 A @ 24 VDC, 0.143 A @ 48 VDC
Physical Characteristics
Housing
Metal
Dimensions
Weight
40 x 70 x 83 mm (1.58 x 2.76 x 3.27 in)
322 g (0.71 lb)
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
Ambient Relative Humidity
Standards and Certifications
Safety
UL 60950-1 Ed.2, UL 62368-1
EN 55032/35
EMC
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
Hazardous Locations
Railway
UL/cUL Class I Division 2 Groups A/B/C/D
EN 50121-4
Traffic Control
Shock
NEMA TS2
IEC 60068-2-27
3
www.moxa.com
Freefall
IEC 60068-2-32
IEC 60068-2-6
Vibration
MTBF
Time
1,340,000 hrs
Standards
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x IEC-G102-BP industrial next-generation IPS
1 x USB-C to DB9 cable
Cable
Installation Kit
Documentation
DIN and USB caps
1 x quick installation guide
1 x warranty card
Ordering Information
10/100/1000BaseT(x)
Ports, RJ45 Connector
SDC
Manageable
Automatic Pattern Updates
via SDC
Model Name
Manual Pattern Updates
Operating Temp.
-10 to 60°C
-40 to 75°C
-10 to 60°C
-40 to 75°C
-10 to 60°C
-40 to 75°C
Yes, 1 year of updates
included
Yes, 1 year of updates
included
IEC-G102-BP-Pro
IEC-G102-BP-Pro-T
IEC-G102-BP-Pro-H
IEC-G102-BP-Pro-H-T
IEC-G102-BP-SA
IEC-G102-BP-SA-T
2
Yes
Yes
Yes
Yes
No
Yes, 1 year of updates
included
Yes, 1 year of updates
included
2
2
2
2
2
Yes, requires IEC pattern
update license
Yes, requires IEC pattern
update license
Yes, requires IEC pattern
update license
Yes, requires IEC pattern
update license
Yes, while under 5-year
warranty
No
No
Yes, while under 5-year
warranty
No
© Moxa Inc. All rights reserved. Updated Nov 04, 2020.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
4
www.moxa.com
相关型号：
©2020 ICPDF网 联系我们和版权申明