IOLOGIKE2214-T [MOXA]
Smart Ethernet remote I/O with Click&Go Logic;型号: | IOLOGIKE2214-T |
厂家: | Moxa |
描述: | Smart Ethernet remote I/O with Click&Go Logic |
文件: | 总8页 (文件大小:1393K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ioLogik E2200 Series
Smart Ethernet remote I/O with Click&Go Logic
Features and Benefits
• Front-end intelligence with patented Click&Go control logic, up to 24 rules
• Active communication with MX-AOPC UA Server
• Saves time and wiring costs with peer-to-peer communications
• Supports SNMP v1/v2c/v3
• Friendly configuration via web browser
• Simplifies I/O management with MXIO library for Windows or Linux
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F)
environments
Certifications
Introduction
Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to
control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s
ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to
the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control
using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured
specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling
methods.
PC-Free Alarm and Control Intelligence
This device supports simple yet powerful Click&Go™ technology to
configure event-driven reports and alarms delivered over email, TCP/
UDP, or SNMP traps, giving you a powerful and effective tool for
delivering timestamped status updates in real time.
With built-in Click&Go™ intelligence, this device can be configured
for simple outputs paired up with simple input triggers without the
need for a PC controller. This allows it to be configured to
automatically report I/O events according to conditions specified by
the user.
SNMP for Ethernet Device Management
By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O
registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT
professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is
ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and
transportation.
1
www.moxa.com
Push Technology for Events and Alarms
When used with MX-AOPC UA Server, devices can use active push
communications when communicating changes in state and/or
events to a SCADA system. Unlike a polling system, when using a
push architecture for communications with a SCADA system,
messages will only be delivered when changes in state or configured
events occur, resulting in higher accuracy and lower amounts of data
that need to be transferred.
Specifications
Control Logic
Language
Click&Go
Input/Output Interface
Analog Input Channels
ioLogik E2240 Series: 8
ioLogik E2242 Series: 4
Analog Output Channels
ioLogik E2240 Series: 2
Configurable DIO Channels (by software)
ioLogik E2212 Series: 4
ioLogik E2242 Series: 12
Digital Input Channels
Digital Output Channels
ioLogik E2210 Series: 12
ioLogik E2212 Series: 8
ioLogik E2214 Series: 6
ioLogik E2210/E2212 Series: 8
ioLogik E2260/E2262 Series: 4
Relay Channels
RTD Channels
Thermocouple Channels
Buttons
ioLogik E2214 Series: 6
ioLogik E2260 Series: 6
ioLogik E2262 Series: 8
Reset button
Isolation
3k VDC or 2k Vrms
0 to 9
Rotary Switch
Digital Inputs
Connector
Screw-fastened Euroblock terminal
900 Hz
Counter Frequency
Digital Filtering Time Interval
Dry Contact
Software configurable
On: short to GND
Off: open
I/O Mode
DI or event counter
Points per COM
ioLogik E2210 Series: 12 channels
ioLogik E2212/E2242 Series: 6 channels
ioLogik E2214 Series: 3 channels
2
www.moxa.com
Sensor Type
ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)
ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
Wet Contact (DI to GND)
On: 0 to 3 VDC
Off: 10 to 30 VDC
Digital Outputs
Connector
Screw-fastened Euroblock terminal
200 mA per channel
DO or pulse output
Sink
Current Rating
I/O Mode
I/O Type
Over-Current Protection
Over-Temperature Shutdown
Over-Voltage Protection
Pulse Output Frequency
DIO Output Leakage Current
0.65 A per channel @ 25°C
175°C (min.)
45 VDC (typical)
1 kHz
4.0 mA @ 24 VDC
Relays
Connector
Screw-fastened Euroblock terminal
Contact Current Rating
Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Contact Resistance
Electrical Endurance
Mechanical Endurance
Minimum Permitted Load
Pulse Output Frequency
Type
100 milli-ohms (max.)
100,000 operations @ 5 A resistive load
1,000,000 operations
1 A @ 5 VDC
0.3 Hz at rated load
Form A (N.O.) power relay
Relay or pulse output
I/O Mode
Note
Ambient humidity must be non-condensing and remain between 5 and 95%. The relays
may malfunction when operating in high condensation environments below 0°C.
Analog Inputs
Accuracy
ioLogik E2240/E2242:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
ioLogik E2240-T/E2242-T:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
0.5% FSR @ -40 to 75°C
Connector
I/O Mode
Screw-fastened Euroblock terminal
Voltage/Current
I/O Type
Differential
Input Impedance
ioLogik E2240 Series: 900 kilo-ohms (min.)
ioLogik E2242 Series: 200 kilo-ohms (min.)
3
www.moxa.com
Input Range
ioLogik E2240 Series: 150 mV, 500 mV, 5 V, 10 V, 0 to 20 mA, 4 to 20 mA
ioLogik E2242 Series: 150 mV, 0 to 150 mV, 500 mV, 0 to 500 mV, 5 V, 0 to 5 V, 10 V,
0 to 10 V, 0 to 20 mA, 4 to 20 mA
Resolution
16 bits
Sampling Rate
ioLogik E2240 Series:
All Channels: 10 samples/sec for voltage; 6 samples/sec for current
Per Channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
Single channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
ioLogik E2242 Series:
All channels: 32 samples/sec
Per channel: 8 samples/sec
Single channel: 100 samples/sec
Built-in Resistor for Current Input
Over-Voltage Protection
120 ohms
-25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Analog Outputs
Accuracy
ioLogik E2240:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
ioLogik E2240-T:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
0.5% FSR @ -40 to 75°C
Output Range
0 to 10 VDC
4 to 20 mA
Resolution
12-bit
Load (Current Mode)
Internal power: 250 ohms (max.)
RTDs
Accuracy
ioLogik E2260:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
ioLogik E2260-T:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
0.5% FSR @ -40 to 75°C
Connector
Screw-fastened Euroblock terminal
2- or 3-wire
Input Connection
Input Impedance
Sensor Type
625 kilo-ohms (min.)
JPT100, JPT200, JPT500 (-200 to 640°C)
JPT1000 (-200 to 350°C)
NI100, NI200, NI500 (-60 to 250°C)
NI1000 (-60 to 150°C)
NI120 (-80 to 260°C)
PT1000 (-200 to 350°C)
PT50, PT100, PT200, PT500 (-200 to 850°C)
Resistance of 310, 620, 1250, and 2200 ohms
Resolution
0.1°C or 0.1 ohms
Sampling Rate
All channels: 12 samples/sec
Per channel: 2 samples/sec
4
www.moxa.com
Thermocouples
Millivolt Accuracy
ioLogik E2262:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
ioLogik E2262-T:
0.1% FSR @ 25°C
0.3% FSR @ -10 to 60°C
0.5% FSR @ -40 to 75°C
TC Accuracy
Types J, T, E, S, B: 5°C
Types K, R, N: 8°C
CJC Accuracy
0.5°C @ 25°C
1.5°C @ -40 to 75°C
Connector
Screw-fastened Euroblock terminal
1 mega-ohms (min.)
Input Impedance
Millivolt Type
19.532 mV
39.062 mV
78.126 mV
Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power
on)
Resolution
16 bits
Sampling Rate
All channels: 12 samples/sec
Per channel: 1.5 samples/sec
Sensor Type
J, K, T, E, R, S, B, N
LED Interface
LED Indicators
PWR, RDY, Serial, I/O Status
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
1
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
Configuration Options
Web Console (HTTP), Windows Utility (ioAdmin)
Industrial Protocols
CGI commands, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library,
SNMPv1 Trap, SNMPv1/v2c/v3
Management
MIB
BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP
Device Settings MIB
SNTP
Time Management
Modbus TCP
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16
Server (Slave)
Mode
Serial Interface
Connector
Terminal block
Serial Standards
No. of Ports
RS-485
1
5
www.moxa.com
Baudrate
Parity
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
None
8
Data Bits
Stop Bits
Flow Control
1
None
Serial Signals
RS-485-2w
Data+, Data-, GND
Serial Software Features
Industrial Protocols
Modbus RTU Server (Client)
Power Parameters
Power Connector
Screw-fastened Euroblock terminal
No. of Power Inputs
Input Voltage
1
12 to 36 VDC
Power Consumption
ioLogik E2210 Series: 202 mA @ 24 VDC
ioLogik E2212 Series: 136 mA @ 24 VDC
ioLogik E2214 Series: 170 mA @ 24 VDC
ioLogik E2240 Series: 198 mA @ 24 VDC
ioLogik E2242 Series: 178 mA @ 24 VDC
ioLogik E2260 Series: 95 mA @ 24 VDC
ioLogik E2262 Series: 160 mA @ 24 VDC
Physical Characteristics
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
250 g (0.55 lb)
Weight
Installation
Wiring
DIN-rail mounting, Wall mounting
I/O cable, 16 to 26 AWG
Power cable, 16 to 26 AWG
Housing
Plastic
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
Ambient Relative Humidity
Altitude
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
2000 m1
Standards and Certifications
Freefall
IEC 60068-2-32
EMC
Safety
EMI
EN 61000-6-2/-6-4
UL 508
CISPR 32, FCC Part 15B Class A
1.
Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
6
www.moxa.com
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Shock
IEC 60068-2-27
IEC 60068-2-6
Vibration
Declaration
Green Product
RoHS, CRoHS, WEEE
MTBF
Time
ioLogik E2210 Series: 213,673 hrs
ioLogik E2212 Series: 217,722 hrs
ioLogik E2214 Series: 307,329 hrs
ioLogik E2240 Series: 155,941 hrs
ioLogik E2242 Series: 204,391 hrs
ioLogik E2260 Series: 327,282 hrs
ioLogik E2262 Series: 341,063 hrs
Standards
Telcordia SR332
Warranty
Warranty Period
ioLogik E2214 Series: 2 years2
ioLogik E2210/E2212/E2240/E2242/E2260/E2262 Series: 5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x ioLogik E2200 Series remote I/O
Documentation
1 x quick installation guide
1 x warranty card
Dimensions
2.
Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.
7
www.moxa.com
Ordering Information
Model Name
Input/Output Interface
12 x DI, 8 x DO
Digital Input Sensor Type
Analog Input Range
–
Operating Temp.
-10 to 60°C
Wet Contact (NPN), Dry
Contact
ioLogik E2210
Wet Contact (NPN), Dry
Contact
ioLogik E2210-T
ioLogik E2212
ioLogik E2212-T
ioLogik E2214
ioLogik E2214-T
ioLogik E2240
ioLogik E2240-T
12 x DI, 8 x DO
8 x DI, 4 x DIO, 8 x DO
8 x DI, 4 x DIO, 8 x DO
6 x DI, 6 x Relay
6 x DI, 6 x Relay
8 x AI, 2 x AO
–
–
–
–
–
-40 to 75°C
-10 to 60°C
-40 to 75°C
-10 to 60°C
-40 to 75°C
-10 to 60°C
-40 to 75°C
Wet Contact (NPN or PNP),
Dry Contact
Wet Contact (NPN or PNP),
Dry Contact
Wet Contact (NPN or PNP),
Dry Contact
Wet Contact (NPN or PNP),
Dry Contact
150 mV, 500 mV, 5 V, 10
V, 0-20 mA, 4-20 mA
–
–
150 mV, 500 mV, 5 V, 10
V, 0-20 mA, 4-20 mA
8 x AI, 2 x AO
150 mV, 0-150 mV, 500
mV, 0-500 mV, 5 V, 0-5 V,
10 V, 0-10 V, 0-20 mA, 4-20
mA
Wet Contact (NPN or PNP),
Dry Contact
ioLogik E2242
12 x DIO, 4 x AI
12 x DIO, 4 x AI
-10 to 60°C
-40 to 75°C
150 mV, 0-150 mV, 500
mV, 0-500 mV, 5 V, 0-5 V,
10 V, 0-10 V, 0-20 mA, 4-20
mA
Wet Contact (NPN or PNP),
Dry Contact
ioLogik E2242-T
ioLogik E2260
ioLogik E2260-T
ioLogik E2262
ioLogik E2262-T
4 x DO, 6 x RTD
4 x DO, 6 x RTD
4 x DO, 8 x TC
4 x DO, 8 x TC
–
–
–
–
–
–
–
–
-10 to 60°C
-40 to 75°C
-10 to 60°C
-40 to 75°C
Accessories (sold separately)
Software
MX-AOPC UA Server
OPC UA Server software for converting fieldbus to the OPC UA standard
© Moxa Inc. All rights reserved. Updated Jul 27, 2020.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
8
www.moxa.com
相关型号:
©2020 ICPDF网 联系我们和版权申明