NPORT5110-T [MOXA]
1-port RS-232/422/485 serial device servers;
| 型号： | NPORT5110-T |
| 厂家： | 
Moxa |
| 描述： | 1-port RS-232/422/485 serial device servers |
| 文件： | 总5页 (文件大小：788K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NPort 5100 Series
1-port RS-232/422/485 serial device servers
Features and Benefits
• Small size for easy installation
• Real COM/TTY drivers for Windows and Linux
• Standard TCP/IP interface and versatile operation modes
• Easy-to-use Windows utility for configuring multiple device servers
• SNMP MIB-II for network management
• Configure by Telnet, web browser, or Windows utility
• Adjustable pull high/low resistor for RS-485 ports
Certifications
Introduction
NPort® 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for
connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 device servers to give your PC
software direct access to serial devices from anywhere on the network.
Most Cost-effective Serial-to-Ethernet Solution
Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost-effective
and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the
NPort® 5100 Series provides the best choice for serial-to-Ethernet converters.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is
also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally
compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for
each serial port.
Standard TCP/IP Interface and Broad Choice of Operation Modes
The NPort® 5100 device servers can be configured for TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode,
ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).
Real COM/TTY Drivers for Existing Software
The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating
through COM/TTY ports. Installation and configuration are painless, and allows your serial devices and PC to communicate seamlessly over a TCP/
IP network. Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment while still allowing you to enjoy the
benefits of networking your serial devices.
Easy to Troubleshoot
NPort® 5100 device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap
messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert
can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be
triggered by a warm start, a cold start, or a change in password.
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
1
Magnetic Isolation Protection
1.5 kV (built-in)
1
www.moxa.com
Ethernet Software Features
Configuration Options
Web Console (HTTP), Serial Console (NPort 5110/5110-T/5150 only), Telnet Console,
Windows Utility
Management
DHCP Client, IPv4, SNTP, SMTP, SNMPv1, Telnet, DNS, HTTP, ARP, BOOTP, UDP,
TCP/IP, ICMP
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP
Embedded
Linux Real TTY Drivers
Fixed TTY Drivers
Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.
x, HP-UX 11i, Mac OS X
Android API
MIB
Android 3.1.x and later
RFC1213, RFC1317
Serial Interface
Connector
DB9 male
1
No. of Ports
Serial Standards
NPort 5110/5110-T: RS-232
NPort 5130: RS-422, RS-485
NPort 5150: RS-232, RS-422, RS-485
Operation Modes
Baudrate
Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client,
TCP Server, UDP
NPort 5110/5110-T: 110 bps to 230.4 kbps
NPort 5130/5150: 50 bps to 921.6 kbps
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
NPort 5130/5150: 1 kilo-ohm, 150 kilo-ohms
NPort 5130/5150: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485
RS-485 Data Direction Control
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Tx+, Tx-, Rx+, Rx-, GND
RS-422
RS-485-4w
RS-485-2w
Tx+, Tx-, Rx+, Rx-, GND
Data+, Data-, GND
Power Parameters
Input Current
NPort 5110/5110-T: 128 mA @ 12 VDC
NPort 5130/5150: 200 mA @ 12 VDC
Input Voltage
12 to 48 VDC
1
No. of Power Inputs
Source of Input Power
Power input jack
2
www.moxa.com
Physical Characteristics
Housing
Metal
Dimensions (with ears)
Dimensions (without ears)
Weight
75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
340 g (0.75 lb)
Installation
Desktop, DIN-rail mounting (with optional kit), Wall mounting
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
Ambient Relative Humidity
-40 to 75°C (-40 to 167°F)
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 55032/24
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Safety
UL 60950-1
MTBF
Time
NPort 5110/5110-T: 3,126,448 hrs
NPort 5130: 2,836,863 hrs
NPort 5150: 2,736,202 hrs
Standards
Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x NPort 5100 Series device server
Power Supply
1 x power adapter, suitable for your region (all models except NPort 5110-T)
Documentation
1 x quick installation guide
1 x warranty card
3
www.moxa.com
Dimensions
Ordering Information
Model Name
NPort 5110
NPort 5110-T
NPort 5130
NPort 5150
Operating Temp.
Baudrate
Serial Standards
RS-232
Input Current
Input Voltage
12-48 VDC
12-48 VDC
12-48 VDC
12-48 VDC
0 to 55°C
-40 to 75°C
0 to 55°C
0 to 55°C
110 bps to 230.4 kbps
110 bps to 230.4 kbps
50 bps to 921.6 kbps
50 bps to 921.6 kbps
128.7 mA @ 12 VDC
128.7 mA @ 12 VDC
200 mA @ 12 VDC
200 mA @ 12 VDC
RS-232
RS-422/485
RS-232/422/485
Accessories (sold separately)
Cables
CBL-F9M9-20
DB9 female to DB9 male serial cable, 20 cm
DB9 female to DB9 male serial cable, 1.5 m
8-pin RJ45 CAT5 Ethernet cable, 1 m
CBL-F9M9-150
CBL-RJ458P-100
CBL-RJ45SF9-150
8-pin RJ45 to DB25 male serial cable with shielding, 1.5m
Connectors
ADP-RJ458P-DB9F
Mini DB9F-to-TB
DB9 female to RJ45 connector
DB9 female to terminal block connector
DIN-Rail Mounting Kits
DK35A
DIN-rail mounting kit, 35 mm
Power Adapters
PWR-12150-AU-SA-T
Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Australia (AU) plug, -40 to 75°C operating
temperature
Applicable Models:
NPort 5110-T
PWR-12150-CN-SA-T
Wide-temperature (-40 to 75°C) locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, China (CN) plug
Applicable Models:
4
www.moxa.com
NPort 5110-T
PWR-12150-EU-SA-T
PWR-12150-UK-SA-T
PWR-12150-USJP-SA-T
Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Continental Europe (EU) plug, -40 to 75°C operating
temperature
Applicable Models:
NPort 5110-T
Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, United Kingdom (UK) plug, -40 to 75°C operating
temperature
Applicable Models:
NPort 5110-T
Locking barrel plug, 12 VDC 1.5 A, 100-240 VAC, United States/Japan (US/JP) plug, -40 to 75°C
operating temperature
Applicable Models:
NPort 5110-T
PWR-12050-WPUK-S2
PWR-12050-WPAU-S2
PWR-12050-WPCN-S2
PWR-12050-WPUSJP-S2
PWR-12050-WPEU-S2
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United Kingdom (UK) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Australia (AU) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100 to 240 VAC, China (CN) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United States/Japan (US/JP) plug, 0 to 40°C
operating temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Continental Europe (EU) plug, 0 to 40°C
operating temperature
Power Cords
CBL-PJ21NOPEN-BK-30
Locking barrel plug to bare-wire cable
© Moxa Inc. All rights reserved. Updated Dec 06, 2019.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
5
www.moxa.com
相关型号：
©2020 ICPDF网 联系我们和版权申明