NPORT5450I [MOXA]
4-port RS-232/422/485 serial device servers;
| 型号： | NPORT5450I |
| 厂家： | 
Moxa |
| 描述： | 4-port RS-232/422/485 serial device servers |
| 文件： | 总5页 (文件大小：2444K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NPort 5400 Series
4-port RS-232/422/485 serial device servers
Features and Benefits
• User-friendly LCD panel for easy installation
• Adjustable termination and pull high/low resistors
• Socket modes: TCP server, TCP client, UDP
• Configure by Telnet, web browser, or Windows utility
• SNMP MIB-II for network management
• 2 kV isolation protection for NPort 5430I/5450I/5450I-T
• -40 to 75°C operating temperature range (-T model)
Certifications
Introduction
NPort® 5400 device servers provide many useful features for serial-to-Ethernet applications, including an independent operation mode for each
serial port, user-friendly LCD panel for easy installation, dual DC power inputs, and adjustable termination and pull high/low resistors.
Network Readiness for up to 4 Serial Devices
NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network
your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using
NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both
centralize the management of your serial devices and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial
port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP
Server mode, and ports 3 and 4 in TCP Client mode.
User-friendly LCD Panel for Easy Installation
An LCD panel is built into the NPort® 5400’s top panel, with four
buttons for data input, configuration, and operation mode selection.
The LCD panel displays the server name, serial number, and IP
address, and it can be used to enter or modify parameters such as IP
address, netmask, and gateway. (The LCD panel is not available on
wide-temperature models.)
Dual DC Power Inputs
NPort® 5400 device servers support dual power sources by providing
both a DC terminal block input and a DC power jack input. Providing
two types of power inputs gives users greater flexibility for use with
different applications.
Adjustable Termination and Pull High/Low Resistors
The NPort 5400 Series provides adjustable termination and pull high/
low resistors for RS-485 applications. In some critical environments,
termination resistors may be needed to prevent the reflection of serial
signals, and the pull high/low resistors may need adjusting to
maintain the integrity of the electrical signal. Since no set of resistor
values is universally compatible with all environments, the NPort®
5400 has four sets of DIP switches on the bottom panel to set the
termination and pull high/low resistor values.
1
www.moxa.com
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
1
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
Configuration Options
Telnet Console, Windows Utility, Web Console (HTTP/HTTPS)
Management
ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP,
SNMPv1/v2c, TCP/IP, Telnet, UDP
Filter
IGMP v1/v2
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP
Embedded
Linux Real TTY Drivers
Fixed TTY Drivers
Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.
x, HP-UX 11i, Mac OS X
Android API
Android 3.1.x and later
SNTP
Time Management
Serial Interface
Connector
NPort 5410/5450/5450-T/5450I/5450I-T: DB9 male
NPort 5430/5430I: Terminal block
No. of Ports
4
Serial Standards
NPort 5410: RS-232
NPort 5430 Series: RS-422, RS-485
NPort 5450 Series: RS-232, RS-422, RS-485
Operation Modes
Baudrate
Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client,
TCP Server, UDP
Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800,
2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
2 kV isolation for NPort 5430I/5450I/5450I-T
1 kilo-ohm, 150 kilo-ohms
Flow Control
Isolation
Pull High/Low Resistor for RS-485
RS-485 Data Direction Control
Terminator for RS-485
ADDC® (automatic data direction control)
120 ohms
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Tx+, Tx-, Rx+, Rx-, GND
RS-422
2
www.moxa.com
RS-485-4w
RS-485-2w
Tx+, Tx-, Rx+, Rx-, GND
Data+, Data-, GND
Power Parameters
Input Current
NPort 5410/5450/5450-T: 350 mA @ 12 VDC
NPort 5430: 320 mA @ 12 VDC
NPort 5430I: 530 mA @ 12 VDC
NPort 5450I/5450I-T: 554 mA @ 12 VDC
Input Voltage
12 to 48 VDC
2
No. of Power Inputs
Power Connector
1 removable 3-contact terminal block(s)
Power input jack
Reliability
Automatic Reboot Trigger
Built-in WDT
Alert Tools
Built-in buzzer and RTC (real-time clock)
Physical Characteristics
Housing
Metal
Dimensions (with ears)
Dimensions (without ears)
Weight
181 x 103 x 33 mm (7.14 x 4.06 x 1.30 in)
158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in)
740 g (1.63 lb)
Interactive Interface
LCD panel display (standard temp. models only)
Push buttons for configuration (standard temp. models only)
Installation
Desktop, DIN-rail mounting (with optional kit), Wall mounting
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
Ambient Relative Humidity
-40 to 75°C (-40 to 167°F)
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 55032/24
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Maritime
Medical
Safety
DNV-GL (standard temp. models only)
EN 60601-1-2 Class B, EN 55011 (NPort 5410/5450/5450I only)
UL 60950-1
3
www.moxa.com
MTBF
Time
NPort 5410: 310,331 hrs
NPort 5430/5430I: 265,650 hrs
NPort 5450/5450I: 206,903 hrs
Standards
Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x NPort 5400 Series device server
1 x power wiring adapters: CBL-PJTB-10
1 x wall-mounting kit
Power Supply
Installation Kit
Documentation
1 x quick installation guide
1 x warranty card
Dimensions
Ordering Information
Serial Interface
Connector
Serial Interface
Isolation
Model Name
Serial Interface
Operating Temp.
Input Voltage
NPort 5410
NPort 5430
NPort 5430I
NPort 5450
NPort 5450-T
NPort 5450I
NPort 5450I-T
RS-232
DB9 male
Terminal block
Terminal block
DB9 male
–
–
0 to 55°C
0 to 55°C
0 to 55°C
0 to 55°C
-40 to 75°C
0 to 55°C
-40 to 75°C
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
12 to 48 VDC
RS-422/485
RS-422/485
2 kV
–
RS-232/422/485
RS-232/422/485
RS-232/422/485
RS-232/422/485
DB9 male
–
DB9 male
2 kV
2 kV
DB9 male
Accessories (sold separately)
Cables
CBL-F9M9-150
DB9 female to DB9 male serial cable, 1.5 m
4
www.moxa.com
CBL-F9M9-20
DB9 female to DB9 male serial cable, 20 cm
8-pin RJ45 CAT5 Ethernet cable, 1 m
CBL-RJ458P-100
CBL-RJ45SF9-150
8-pin RJ45 to DB25 male serial cable with shielding, 1.5m
Connectors
ADP-RJ458P-DB9F
Mini DB9F-to-TB
DB9 female to RJ45 connector
DB9 female to terminal block connector
DIN-Rail Mounting Kits
DK35A
DIN-rail mounting kit, 35 mm
Power Adapters
PWR-12125-WPAU-S1
Non-locking barrel plug, 12 VDC, 1.25 A, 100 to 240 VAC, Australia (AU) plug, 0 to 40°C operating
temperature
PWR-12125-WPCN-S1
PWR-12125-WPEU-S1
PWR-12125-WPUK-S1
PWR-12125-USJP-S1
PWR-12150-AU-SA-T
Non-locking barrel plug, 12 VDC, 1.25 A, 100 to 240 VAC, China (CN) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 1.25 A, 100-240 VAC, Continental Europe (EU) plug, 0 to 40°C
operating temperature
Non-locking barrel plug, 12 VDC, 1.25 A, 100-240 VAC, United Kingdom (UK) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 1.25 A, 100-240 VAC, United States/Japan (US/JP) plug, 0 to 40°C
operating temperature
Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Australia (AU) plug, -40 to 75°C operating
temperature
Applicable Models:
NPort 5450-T
NPort 5450I-T
PWR-12150-CN-SA-T
PWR-12150-EU-SA-T
Wide-temperature (-40 to 75°C) locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, China (CN) plug
Applicable Models:
NPort 5450-T
NPort 5450I-T
Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Continental Europe (EU) plug, -40 to 75°C operating
temperature
Applicable Models:
NPort 5450-T
NPort 5450I-T
PWR-12150-UK-SA-T
Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, United Kingdom (UK) plug, -40 to 75°C operating
temperature
Applicable Models:
NPort 5450-T
NPort 5450I-T
PWR-12150-USJP-SA-T
Locking barrel plug, 12 VDC 1.5 A, 100-240 VAC, United States/Japan (US/JP) plug, -40 to 75°C
operating temperature
Applicable Models:
NPort 5450-T
NPort 5450I-T
Power Wiring
CBL-PJTB-10
Non-locking barrel plug to bare-wire cable
© Moxa Inc. All rights reserved. Updated Nov 22, 2019.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
5
www.moxa.com
相关型号：
©2020 ICPDF网 联系我们和版权申明