NPORT5650I-8-DTL [MOXA]
8-port RS-232/422/485 serial device servers;
| 型号： | NPORT5650I-8-DTL |
| 厂家： | 
Moxa |
| 描述： | 8-port RS-232/422/485 serial device servers |
| 文件： | 总5页 (文件大小：1629K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NPort 5600-DTL Series
8-port RS-232/422/485 serial device servers
Features and Benefits
• 8 serial ports supporting RS-232/422/485
• Compact desktop design
• 10/100M auto-sensing Ethernet
• Configure by Telnet, web browser, or Windows utility
• Supports Real COM and TCP server, TCP client, UDP socket modes
• SNMP MIB-II for network management
Certifications
Introduction
NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network
your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management
hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for
applications that need additional serial ports when mounting rails are not available.
Convenient Design for RS-485 Applications
The NPort® 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some
critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also
important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally
compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low
resistor values manually for each serial port.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help
engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but they also help field
engineers monitor the status of attached serial devices.
Appearance
1
www.moxa.com
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
1
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
Configuration Options
Serial Console, Telnet Console, Web Console (HTTP/HTTPS), Windows Utility
Management
ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP,
SNMPv1/v2c, Telnet, TCP/IP, UDP
Filter
IGMP v1/v2
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP
Embedded
Linux Real TTY Drivers
Fixed TTY Drivers
Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX
5.x, HP-UX 11i, Mac OS X
Android API
MIB
Android 3.1.x and later
RFC1213, RFC1317
SNTP
Time Management
Serial Interface
Connector
DB9 male
8
No. of Ports
Serial Standards
NPort 5610-8-DTL Series: RS-232
NPort 5650-8-DTL Series: RS-232, RS-422, RS-485
Baudrate
Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800,
2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
RTS/CTS, DTR/DSR, XON/XOFF
NPort 5650I-8-DTL Series: 2 kV
1 kilo-ohm, 150 kilo-ohms
ADDC® (automatic data direction control)
NPort 5650 Series: 120 ohms
Flow Control
Isolation
Pull High/Low Resistor for RS-485
RS-485 Data Direction Control
Terminator for RS-485
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Tx+, Tx-, Rx+, Rx-, GND
RS-422
RS-485-4w
RS-485-2w
Tx+, Tx-, Rx+, Rx-, GND
Data+, Data-, GND
2
www.moxa.com
Power Parameters
Input Current
NPort 5610-8-DTL Series: 340 mA @ 12 VDC
NPort 5650-8-DTL Series: 470 mA @ 12 VDC
NPort 5650I-8-DTL Series: 740 mA @ 12 VDC
No. of Power Inputs
Input Voltage
1
12 to 48 VDC
Supported
Power input jack
Reverse Polarity Protection
Source of Input Power
Physical Characteristics
Housing
Metal
Dimensions (with ears)
Dimensions (without ears)
Weight
229 x 135.43 x 46 mm (9.02 x 5.33 x 1.81 in)
197 x 135.43 x 44 mm (7.76 x 5.33 x 1.73 in)
NPort 5610-8-DTL Series: 1760 g (3.88 lb)
NPort 5650-8-DTL Series: 1770 g (3.90 lb)
NPort 5650I-8-DTL Series: 1850 g (4.08 lb)
Installation
Desktop, DIN-rail mounting (with optional kit), Wall mounting (with optional kit)
Environmental Limits
Operating Temperature
Standard Models: 0 to 60°C (-32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
Ambient Relative Humidity
-40 to 75°C (-40 to 167°F)
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 55032/24
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Safety
UL 60950-1
Declaration
Green Product
RoHS, CRoHS, WEEE
MTBF
Time
NPort 5610-8-DTL Series: 953,388 hrs
NPort 5650-8-DTL Series: 740,457 hrs
NPort 5650I-8-DTL Series: 258,150 hrs
Standards
Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
3
www.moxa.com
Package Contents
Device
1 x NPort 5600-DTL Series device server
1 x wall-mounting kit
Installation Kit
Cable
1 x Ethernet, RJ45
Power Supply
Documentation
1 x power adapter, suitable for your region (except -T models)
1 x quick installation guide
1 x warranty card
Dimensions
Ordering Information
Serial Interface
Connector
Serial Interface
Isolation
Model Name
Serial Interface
Operating Temp.
Input Voltage
NPort 5610-8-DTL
NPort 5610-8-DTL-T
NPort 5650-8-DTL
NPort 5650-8-DTL-T
NPort 5650I-8-DTL
NPort 5650I-8-DTL-T
RS-232
DB9
DB9
DB9
DB9
DB9
DB9
–
–
0 to 60°C
-40 to 75°C
0 to 60°C
12-48 VDC
12-48 VDC
12-48 VDC
12-48 VDC
12-48 VDC
12-48 VDC
RS-232
RS-232/422/485
RS-232/422/485
RS-232/422/485
RS-232/422/485
–
–
-40 to 75°C
0 to 60°C
2 kV
2 kV
-40 to 75°C
Accessories (sold separately)
Connectors
ADP-RJ458P-DB9F
Mini DB9F-to-TB
DB9 female to RJ45 connector
DB9 female to terminal block connector
DIN-Rail Mounting Kits
DK35A
DIN-rail mounting kit, 35 mm
Power Adapters
4
www.moxa.com
PWR-12200-DT-S1
Desktop power supply (requires power cord), 12 VDC, 2 A, 100-240 VAC, 0 to 40°C operating
temperature
Power Cords
PWC-C13AU-3B-183
PWC-C13CN-3B-183
PWC-C13EU-3B-183
PWC-C13JP-3B-183
PWC-C13UK-3B-183
PWC-C13US-3B-183
Power cord with Australian (AU) plug, 1.83 m
Power cord with three-prong China (CN) plug, 1.83 m
Power cord with Continental Europe (EU) plug, 1.83 m
Power cord with Japan (JP) plug, 7A/125V, 1.83 m
Power cord with United Kingdom (UK) plug, 1.83 m
Power cord with United States (US) plug, 1.83 m
Wall-Mounting Kits
WK-35-04
2 plates (35 x 44 x 2.5mm) with 6 screws (FTSx6 M3x4mm)
© Moxa Inc. All rights reserved. Updated Nov 08, 2019.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
5
www.moxa.com
相关型号：
©2020 ICPDF网 联系我们和版权申明