TCC-80 [MOXA]
Port-powered RS-232 to RS-422/485 converters;型号: | TCC-80 |
厂家: | Moxa |
描述: | Port-powered RS-232 to RS-422/485 converters |
文件: | 总5页 (文件大小:1357K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TCC-80/80I Series
Port-powered RS-232 to RS-422/485 converters with optional 2.5 kV isolation
Features and Benefits
• External power source supported but not required
• Compact size
• Converts RS-422, and both 2-wire and 4-wire RS-485
• RS-485 automatic data direction control
• Automatic baudrate detection
• Built-in 120-ohm termination resistors
• 2.5 kV isolation (for TCC-80I only)
• LED port power indicator
Certifications
Introduction
The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power
source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-
232’s TxD and RxD lines.
Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically when the circuitry senses the TxD
output from the RS-232 signal. This means that no programming effort is required to control the transmission direction of the RS-485 signal.
Port Power over RS-232
The RS-232 port of the TCC-80/80I is a DB9 female socket that can
connect directly to the host PC, with power drawn from the TxD line.
Regardless of whether the signal is high or low, the TCC-80/80I can
obtain enough power from the data line. However, external power can
be used if the handshake line is not available, if the serial cable is too
long, or if the RS-232 device is a low-power device. For external power,
a five to twelve VDC power supply can be connected using an adapter
or a USB power cord.
Port Power Dissipation
When installing a TCC-80 or TCC-80I converter, it is important to pay attention to power consumption, RS-232 cable length, and RS-422/485
transmission distance. In general, the TCC-80 and TCC-80I obtain 50 mW of power from the power source. Standard PC COM ports can provide 70
to 90 mW of power if the TxD, RTS, and DTR lines are connected. Moreover, the RS-232 cable should be shorter than 15 m (@ 9600 bps) to ensure
that less power is lost from the host/device to the TCC-80. The remainder of the supplied power is used for transmitting the RS-422/485 signal.
1
www.moxa.com
Port Power and Optical Isolation
The RS-232 port of the TCC-80/80I is a DB9 female socket that can
connect directly to the host PC, with power drawn from the TxD line.
Electrical 2.5 kV isolation for the TCC-80I is achieved with a photo
coupler that transforms the electrical signal into light, and then re-
transforms the light back into an electrical signal on the other side. In
this way, the two electrical circuits are completely isolated from each
other. This also protects the devices from ground loop currents,
reduces damage caused by data loss, and prevents damage to the
communication interfaces.
LED Port Power Indicator
It’s easy enough to test the serial device with a multimeter to
determine that the serial device will provide enough power to the
media converter. However, it’s even easier to let the TCC-80I test the
device for you. Simply connect the TCC-80I to the device’s RS-232
port and set the SW4 switch to Test mode. If the port power LED
indicator lights up, the TCC-80I is receiving enough power. If the LED
does not light up, you will need to attach an external power source to
the TCC-80I.
Specifications
Serial Interface
Connector
TCC-80-DB9/80I-DB9: DB9 male
TCC-80/80I: Terminal block
No. of Ports
2
Serial Standards
Isolation
RS-232, RS-422, RS-485
TCC-80I/80I-DB9: 2 kV
ADDC® (automatic data direction control)
N/A, 120 ohms, 120 kilo-ohms
300 bps to 115.2 kbps
RS-485 Data Direction Control
Terminator for RS-485
Baudrate
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Tx+, Tx-, Rx+, Rx-, GND
RS-422
RS-485-4w
RS-485-2w
Tx+, Tx-, Rx+, Rx-, GND
Data+, Data-, GND
Power Parameters
Input Current
TCC-80: 30 mA @ 5 to 12 VDC
TCC-80-DB9: 30 mA @ 5 to 12 VDC
TCC-80I: 20 mA @ 5 to 12 VDC
TCC-80I-DB9: 20 mA @ 5 to 12 VDC
Input Voltage
5 to 12 VDC
1
No. of Power Inputs
Overload Current Protection
Supported
2
www.moxa.com
Power Consumption
Source of Input Power
TCC-80/80-DB9: 30 mA @ 5 to 12 VDC
TCC-80I/80I-DB9: 20 mA @ 5 to 12 VDC
Power input jack
Physical Characteristics
Housing
Plastic top cover, metal bottom plate
IP30
IP Rating
Dimensions
TCC-80/80I: 42 x 80 x 22 mm (1.65 x 3.15 x 0.87 in)
TCC-80-DB9/80I-DB9: 42 x 91 x 23.6 mm (1.65 x 3.58 x 0.93 in)
Weight
50 g (0.11 lb)
Desktop
Installation
Environmental Limits
Operating Temperature
0 to 60°C (32 to 140°F)
-20 to 75°C (-4 to 167°F)
5 to 95% (non-condensing)
Storage Temperature (package included)
Ambient Relative Humidity
Standards and Certifications
EMC
EN 55032/24
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Environmental Testing
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3
Safety
EN 60950-1, IEC 60950-1
IEC 60068-2-6
Vibration
MTBF
Time
2,781,161 hrs
Standards
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x TCC-80/80I Series converter
1 x USB power cord, 50 cm
Cable
Documentation
1 x quick installation guide
1 x warranty card
3
www.moxa.com
Dimensions
TCC-80
TCC-80I
4
www.moxa.com
TCC-80-DB9, TCC-80I-DB9
Ordering Information
Model Name
TCC-80
Isolation
Serial Connector
Terminal Block
Terminal Block
DB9
–
✓
–
TCC-80I
TCC-80-DB9
TCC-80I-DB9
✓
DB9
Accessories (sold separately)
Cables
CBL-USBAP-50
USB A male/2.1 mm DC Jack cable, 50 cm
Connectors
ADP-RJ458P-DB9F
Mini DB9F-to-TB
DB9 female to RJ45 connector
DB9 female to terminal block connector
Power Adapters
PWR-12050-WPUSJP-S2
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United States/Japan (US/JP) plug, 0 to 40°C
operating temperature
PWR-12050-WPCN-S2
PWR-12050-WPEU-S2
PWR-12050-WPUK-S2
PWR-12050-WPAU-S2
Non-locking barrel plug, 12 VDC, 0.5 A, 100 to 240 VAC, China (CN) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Continental Europe (EU) plug, 0 to 40°C
operating temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United Kingdom (UK) plug, 0 to 40°C operating
temperature
Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Australia (AU) plug, 0 to 40°C operating
temperature
© Moxa Inc. All rights reserved. Updated May 18, 2020.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
5
www.moxa.com
相关型号:
TCC2023-16
RF Power Bipolar Transistor, 1-Element, S Band, Silicon, NPN, 0.397 X 0.397 INCH, HERMETIC SEALED, M147, 2 PIN
MICROSEMI
TCC2023-6
RF Power Bipolar Transistor, 1-Element, S Band, Silicon, NPN, 0.397 X 0.397 INCH, HERMETIC SEALED, M155, 2 PIN
MICROSEMI
TCC20L08
RF Small Signal Bipolar Transistor, 0.15A I(C), 1-Element, S Band, Silicon, NPN, 0.230 INCH, HERMETIC SEALED, STRIPLINE, M151, 2 PIN
MICROSEMI
TCC2223-18
RF Power Bipolar Transistor, 1-Element, S Band, Silicon, NPN, 0.397 X 0.397 INCH, HERMETIC SEALED, M147, 2 PIN
MICROSEMI
TCC2223-3
RF Power Bipolar Transistor, 1-Element, S Band, Silicon, NPN, 0.397 X 0.397 INCH, HERMETIC SEALED, M155, 2 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明