G135 [MPD]
DC-DC Regulated Power Supply Module, 1 Output, 1W, Hybrid, MINI DIP-14/6;
| 型号： | G135 |
| 厂家： | 
MICROPOWER DIRECT, LLC |
| 描述： | DC-DC Regulated Power Supply Module, 1 Output, 1W, Hybrid, MINI DIP-14/6 |
| 文件： | 总2页 (文件大小：80K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
G100Series
1W “MiniDIP”
Single & Dual Output
DC/DC Convverteerrss
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Conditions
Min.
4.5
Typ.
5.0
Max.
5.5
Units
Key Features:
5 VDC Input
● 1W Output Power
12 VDC Input 10.8
24 VDC Input 21.6
48 VDC Input 44.0
Internal Capacitor
12.0
24.0
48.0
13.2
26.4
52.0
● Low Profile MiniDIP Case
● Single & Dual Outputs
● 1,000 VDC Isolation
● >2 MHour MTBF
Input Voltage Range
VDC
Input Filter
Reverse Polarity Input Current
0.3
A
● 36 Standard Models
● Industry Standard Pin-Out
Output
Parameter
Output Voltage Accuracy
Output Voltage Balance
Line Regulation
Conditions
Min.
Typ.
1.0
0.1
Max.
3.0
1.0
Units
%
%
Dual Output , Balanced Loads
For Vin Change of 1%
1.2
%
Load Regulation (Note 1)
Ripple & Noise (20 MHz) (Note 2)
Output Power Protection
Temperature Coefficient
Output Short Circuit
General
See Model Selection Guide
50
75
mV P - P
%
%/ºC
120
0.01
0.02
Momentary (0.5 Sec.)
Parameter
Isolation Voltage
Conditions
Conditions
Min.
60 Seconds 1,000
500 VDC 1,000
100 kHz, 1V
Typ.
Max.
Units
VDC
MΩ
pF
kHz
Isolation Resistance
Isolation Capacitance
Switching Frequency
Environmental
Parameter
Operating Temperature Range
Operating Temperature Range
Storage Temperature Range
Cooling
60
125
Min.
Typ.
Max.
+85
+90
Units
ºC
ºC
Ambient
Case
-40
-40
-40
+25
+125
ºC
Free Air Convection
RH, Non-condensing
Humidity
95
%
Physical
Case Size (5V 12V & 24V Input Models)
Case Size (48V Input Models)
Case Material
0.80 x 0.40 x 0.25 Inches (20.32 x 10.16 x 6.45 mm)
0.80 x 0.40 x 0.27 Inches (20.32 x 10.16 x 6.88 mm)
Non-Conductive Black Plastic (UL94-V0)
0.09 Oz (2.7g)
MicroPower Direct
232 Tosca Drive
Stoughton, MA 02072
USA
Weight
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Reliability Specifications
Parameter
MTBF
Absolute Maximum Ratings
Parameter
Conditions
MIL HDBK 217F, 25ºC, Gnd Benign
Min.
2.0
Typ.
Typ.
Max.
Units
MHours
Conditions
Min.
Max.
9.0
18.0
30.0
55.0
260
450
Units
5 VDC Input -0.7
12 VDC Input -0.7
24 VDC Input -0.7
48 VDC Input -0.7
Input Voltage Surge (1 Sec)
VDC
Lead Temperature
Internal Power Dissipation
1.5 mm From Case For 10 Sec
All Models
ºC
mW
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
Model Selection Guide
Input
Output
Load
Fuse Rating
Slow-Blow
(mA)
500
Model
Efficiency
(%, Typ)
Voltage (VDC)
Number
Current (mA)
Full-Load No-Load
Regulation
Voltage Current
Current
(%, Max)
(VDC) (mA, Max) (mA, Min)
Nominal
5
Range
G101
G102
G103
G104
G105
G106
G107
G108
G109
G111
G112
G113
G114
G115
G116
G117
G118
G119
G121
G122
G123
G124
G125
G126
G127
G128
G129
G131
G132
G133
G134
G135
G136
G137
G138
G139
4.5 - 5.5
235
264
258
258
258
278
258
258
258
113
108
106
105
104
113
106
104
105
49
30
30
30
30
30
30
30
30
30
15
15
15
15
15
15
15
15
15
8
3.3
5.0
9.0
260.0
200.0
110.0
84.0
67.0
100.0
56.0
42.0
34.0
260.0
200.0
110.0
84.0
67.0
100.0
56.0
42.0
34.0
260.0
200.0
110.0
84.0
67.0
100.0
56.0
42.0
34.0
260.0
200.0
110.0
84.0
67.0
100.0
56.0
42.0
34.0
5.0
4.0
2.0
1.5
1.0
2.0
1.0
0.8
0.7
5.0
4.0
2.0
1.5
1.0
2.0
1.0
0.8
0.7
5.0
4.0
2.0
1.5
1.0
2.0
1.0
0.8
0.7
5.0
4.0
2.0
1.5
1.0
2.0
1.0
0.8
0.7
10
10
8
7
7
10
8
7
7
8
8
5
5
5
8
5
5
5
8
8
5
5
5
8
5
5
5
8
8
5
5
5
8
5
5
5
73
75
78
78
78
72
78
78
79
74
77
78
80
80
74
79
81
81
73
76
76
78
79
72
76
79
80
71
70
75
77
78
70
75
75
78
5
4.5 - 5.5
4.5 - 5.5
500
5
500
5
4.5 - 5.5
12.0
15.0
5.0
500
5
4.5 - 5.5
500
5
4.5 - 5.5
500
5
4.5 - 5.5
9.0
500
5
4.5 - 5.5
12.0
15.0
3.3
500
5
4.5 - 5.5
500
12
12
12
12
12
12
12
12
12
24
24
24
24
24
24
24
24
24
48
48
48
48
48
48
48
48
48
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
21.6 - 26.4
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
44.0 - 52.0
200
5.0
9.0
200
200
12.0
15.0
5.0
200
200
200
9.0
200
12.0
15.0
3.3
200
200
100
54
8
5.0
9.0
100
54
8
100
54
8
12.0
15.0
5.0
100
53
8
100
58
8
100
55
8
9.0
100
53
8
12.0
15.0
3.3
100
53
8
100
29
6
100
30
6
5.0
9.0
12.0
15.0
5.0
9.0
12.0
15.0
100
28
6
100
27
6
100
27
6
100
30
6
100
28
6
100
28
6
100
27
6
100
Notes:
Pin Connections
1. Output load regulation is specified for a load change of 20% to 100%.
Pin Single
Dual
Pin
Single
Dual
2. When measuring output ripple, it is recommended that an external ceramic capacitor (approx 10 µF)
be placed from the +Vout pin to the -Vout pin for single output units and from each output to common
for dual output units.
3. All 3.3, 5 and 5 VDC output models may be operated to +85ºC ambient with an unobstructed airꢀow
of 3.6 ft/S (1.1 m/S).
1
7
8
-Vin
NC
-Vin
NC
9
11
14
+Vout
-Vout
+Vin
+Vout
-Vout
+Vin
No Pin Common
NC : No Connection
4. The 5V, 12V and 24V input units do not require external components to operate, but the use of an
input capacitor (10 µF) may enhance performance in some applications. An output capacitor (1.0 µF
to 10 µF) may be used to reduce ripple. The 48V input models require an input capacitor of 4.7 uF to
47 uF (dependent upon the application).
Mechanical Dimensions
5. Dual output units may be connected to provide a 10V, 18V, 24V or 30 VDC output. To do this, connect
the load across the positive (+Vout) and negative (-Vout) outputs and ꢀoat the output common.
6. It is recommended that a fuse be used on the input of a power supply for protection. See the table above
for the correct rating.
Derating Curve
Capacitive
Load
Single Output
(μF Max)
220
Dual Output
(μF Max)
100
Notes: All dimensions are typical in inches (mm)
Tolerance x.xx = 0.01 ( 0.25)
“H” = 0.25 (6.45) For 5, 12 & 24V Input Models
0.27 (6.88) For 48 VDC Input Models
MicroPower Direct
Pin 1 is marked by a “dot” or indentation on the
top of the unit
www.micropowerdirect.com
232 Tosca Drive Stoughton, MA 02072
■
TEL: (781) 344-8226
■
FAX: (781) 344-8481
■
E-Mail: sales@micropowerdirect.com
相关型号：
©2020 ICPDF网 联系我们和版权申明