EV2000DJ-00A [MPS]
Low Input Voltage 150mA Linear Regulator Evaluation Board; 低输入电压150mA线性稳压器评估板型号: | EV2000DJ-00A |
厂家: | MONOLITHIC POWER SYSTEMS |
描述: | Low Input Voltage 150mA Linear Regulator Evaluation Board |
文件: | 总3页 (文件大小:143K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM
EV2000DJ-00A
Low Input Voltage 150mA
Linear Regulator Evaluation Board
TM
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The EV2000DJ-00A is the evaluation board for
the MP2000DJ. The board operates from a
1.35V to 6.0V input voltage and regulates the
output voltage at 1.2V with 2% accuracy. By
adjusting the resistor divider values, the board
can regulate the output voltage from 0.5V to 5V.
It can also supply up to 150mA of load current.
•
•
•
•
•
Excellent Load Transient Response
Excellent Line Regulation
1.35V to 6V Input Voltage
1.2V Output Voltage
Up to 150mA Load Current
APPLICATIONS
•
•
•
802.11 PC Cards
Mobile Handset PLL Power
Audio Codec Power
ELECTRICAL SPECIFICATIONS
Parameter
Symbol
Value
1.35 – 6.0
1.2
Units
Input Voltage
Output Voltage
VIN
V
V
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
VOUT
Operating
Temperature
–40 – +85
°C
EV2000DJ-00A EVALUATION BOARD
(L x W H) 2.0” x 2.0” x 0.4” (5.1cm x 5.1cm x 1.1cm)
Board Number
MPS IC Number
EV2000DJ-00A
MP2000DJ
EV2000DJ-00A Rev. 1.0
9/26/2005
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.
1
TM
EV2000DJ-00A – LOW INPUT VOLTAGE, 150MA LINEAR REGULATOR EV BOARD
EVALUATION BOARD SCHEMATIC
T1
VIN
GND
1
T2
IN
VOUT
GND
5
OUT
U1
MP2000
4
3
EN
FB
EN
GND
2
EV2000_S01
EV2000DJ-00A BILL OF MATERIALS
Qty Ref Value Description
Package Manufacturer Manufacturer P/N
1
1
1
1
1
1
1
C1
C2
C3
2.2µF Ceramic Capacitor, 10V, X5R
0.1µF Ceramic Capacitor, 25V, X7R/X5R
4.7µF Ceramic Capacitor, 6.3V, X5R
0805
0805
0805
0805
0805
0805
TDK
TDK
TDK
Panasonic
Panasonic
Panasonic
C2012X5R1A225K
C2012X7R1E104K
C2012X5R0J475K
ERJ-6ENF4022V
ERJ-6ENF4992V
ERJ-6ENF1002V
MP2000DJ
R1 28.7kΩ Resistor, 1%
R2 20.0kΩ Resistor, 1%
R3
U1
10kΩ Resistor, 5%
Low Voltage 150mA Linear Reg.
TSOT23-5 MPS
EV2000DJ-00A Rev. 1.0
9/26/2005
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.
2
TM
EV2000DJ-00A – LOW INPUT VOLTAGE, 150MA LINEAR REGULATOR EV BOARD
PRINTED CIRCUIT BOARD LAYOUT
Figure 1—Top Silk Layer
Figure 2—Top Layer
QUICK START GUIDE
The output voltage of this board is set to 1.2V. The EN pin is connected to ground with a 10kΩ resistor
for automatic startup. You can connect EN to VIN to disable the MP2000.
1. Attach the positive and negative ends of the load to the VOUT and GND pins, respectively.
2. Attach the input voltage (1.35V ≤ VIN ≤ 6V) and input ground to the VIN and GND pins,
respectively.
3. The default resistor values on the board are R1=28.7kΩ and R2=20kΩ. Changing these resistor
values will change the output voltage. Use the following equation to determine resistor values
for different output voltages:
R1
R2
⎛
⎞
⎟
VOUT = 0.5V × 1+
⎜
⎝
⎠
T1 and T2 are test points for accurately measuring the input and output voltages.
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
EV2000DJ-00A Rev. 1.0
9/26/2005
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.
3
相关型号:
©2020 ICPDF网 联系我们和版权申明