EM316EDFA-BR

更新时间:2024-09-18 08:27:35
品牌:MRV
描述:Optical Amplifi ers

EM316EDFA-BR 概述

Optical Amplifi ers 光功率放大器商

EM316EDFA-BR 数据手册

通过下载EM316EDFA-BR数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Datasheet  
Optical Amplifiers  
Features  
Three models  
- EM316EDFA-BR (booster amplifier)  
- EM316EDFA-SBR (single wavelength booster)  
- EM316EDFA-LPR (in-line and pre-amplifier)  
Applications  
- Metro DWDM distance extension  
- Single wavelength distance extension  
Automatic Gain Control (AGC)  
Managed and non-managed operation  
Advanced performance monitoring  
Overview  
-
-
-
-
Input and output power levels  
Signal gain  
Temperature  
Fiber Driver® EM316EDFA modules provide a multi-function, low-  
noise, Erbium-Doped Fiber Amplifier (EDFA) solution ideal for  
metro Dense Wavelength Division Multiplexing (DWDM) as well  
as single wavelength distance extension applications.  
Supply voltage  
Gain flattening filters (GFF) on BR and LPR models  
Manual (SNMP management) and automatic power  
shutdown  
The EM316EDFA-BR, EM316EDFA-SBR, and EM316EDFA-LPR are  
part of the Fiber Driver optical multi-service platform solution  
family. The EM316EDFA-BR and EM316EDFA-SBR are optical  
boosters that extend transmission range. The EM316EDFA-LPR  
may be either an in-line repeater or a pre-amplifier that can  
strengthen weak signals, optionally extending the link range  
as well. By performing two functions, the EM316EDFA-LPR also  
reduces some inventory requirements.  
Status LEDs  
-
-
Input power OK  
Output power OK  
Hot-swap support  
Fiber Driver® two-slot and sixteen-slot chassis  
compatibility  
TheEM316EDFAmodulesemployastate-of-the-artopticaldesign  
and sophisticated control circuitry. This technology provides  
constant gain even when wavelengths are added or dropped in  
the network. Any fluctuations caused by wavelength filtering are  
handled by ultra-fast transient suppression.  
Long Haul Application  
NC316BU-16/AC  
NC316BU-16/AC  
NC316BU-16/AC  
EM316DMR3G-3R  
EM316GEMX2R  
EM316-2XFP  
EM316DMR3G-3R  
A
B
B
+4dBm  
DWDM  
DWDM  
MUX  
BOOSTER  
IN-LINE  
PRE-AMP  
EM316GEMX2R  
EM316-2XFP  
+9dBm  
MUX  
90 km  
80 km  
OK  
OK  
OK  
EM316EDFA-BR  
EM316EDFA-LPR  
EM316EDFA-LPR  
1
Datasheet  
When paired with the Fiber Driver Network  
EM316EDFA optical amplifiers use automatic gain  
control (AGC). The module maintains constant gain  
for each channel according to the gain parameter  
setting as long as the total output power does not  
exceed the maximum rated value (see Saturated  
Output values). The module is initialized with factory  
values configured for multi-channel applications.  
Management Module (EM316LNXNM-OT), full  
monitoring and configuration capabilities are  
supported locally with serial RS-232 and remotely  
with RJ-45 and SFP Ethernet interfaces. Telnet  
and secure shell (ssh) provide convenient access  
for remote command line management while  
MegaVision Pro®, a network management system  
(NMS) from MRV, provides a graphical user interface  
(GUI) to control the modules using SNMP. Either  
way, costly service calls are greatly reduced.  
As a state-of-the-art multi-channel DWDM optical  
amplifier, the EM316EDFA-BR and EM316EDFA-  
LPR are equipped with gain flattening filters (GFF)  
providing a flat gain response across the entire  
C-band and input power range. This feature is not  
required in the EM316EDFA-SBR module.  
EM316EDFA advanced performance monitoring  
capabilities include real time reporting of input and  
output power levels, temperature, and signal gain.  
The EM316EDFA optical amplifiers provide  
automatic power shutdown when input falls below  
the threshold. Power shutdown may also be forced  
through the module management.  
Optical amplifiers operate in three basic modes,  
depending upon their position in a data link: booster,  
in-line, and pre- amplifier. At the transmission end  
of the link, a booster amplifies the initial signal to  
extend the signal range. In the middle or at the  
receiving end of an optical link, the sensitive receiver  
of an in-line or pre-amplifier repeats the signal for  
extended range or clarity at the end of the link.  
Fiber Driver EM316EDFA modules are compact, two-  
slot wide modules. The two-slot chassis supports the  
EM316EDFA modules in unmanaged applications,  
and the sixteen-slot chassis supports unmanaged  
mode or managed optical amplifier applications  
with the EM316LNXNM-OT module. Other chassis do  
not support the two-slot EM316EDFA modules.  
In WDM systems, input levels are sums of all the  
individual input levels from each input wavelength  
to the amplifier. Contact MRV support for more  
specific information.  
Contact your MRV Communications representative or  
visit http://www.mrv.comfor additional information on  
Fiber Driver EM316EDFA modules and applications.  
Specifications  
Diagnostic LEDs  
Power On, Input Optical Power (in range), Output Optical Power (in range)  
Electrical Requirement  
Operating Temperature  
Storage Temperature  
Relative Humidity  
Physical Dimensions  
Weight  
Power provided by chassis  
00C to 500C (320F to 1220F)  
-40°C to 70°C (-40°F to 158°F)  
85% maximum, non-condensing  
50 mm x 75 mm x 175 mm deep (2x 3x 7deep)  
Approximately 272 g (9.6 oz)  
Power Usage  
1.5 - 6 W  
Regulatory Compliance  
FCC Part 15, Class A; IC, Class A; EMC Directive: Emission (Class A) and Immunity;  
EMC: LVD Directive: Electrical Safety (Laser Class 1M,TUV certified); RoHS Directive; China RoHS;  
WEEE Directive:Wheelie Bin Mark  
2
Datasheet  
Optical Specifications (EM316EDFA-BR and EM316EDFA-SBR)  
Parameters  
Minimum  
Typical  
Maximum  
Units  
nm  
Spectral Range  
1528  
-
-
1563  
Saturation Output (@ +9dBm input)  
Booster Small Signal Gain (@ -9dBm input)  
Expected Input Levels  
18  
-
-
-
dBm  
dB  
9
-
-9  
-
+9  
dBm  
dB  
Gain Flatness (BR only)  
-
+/- 1.0  
EM316EDFA-BR  
EM316EDFA-SBR  
-
-
6.5  
5.5  
7
6
Noise Figure  
dB  
Polarization Mode Dispersion  
Polarization Dependent Gain  
Transient Overshoot (10 dB drop)  
-
-
-
0.3  
+/- 0.2  
0.5  
0.5  
+/- 0.5  
1.0  
ps  
dB  
dB  
Optical Specifications (EM316EDFA-LPR)  
Parameters  
Minimum  
Typical  
Maximum  
Units  
nm  
dBm  
dB  
Spectral Range  
1528  
-
1563  
-
Saturation Output (@ -10dBm input)  
In-line/Pre-amp Small Signal Gain (@ -25dBm input)  
Expected Input Levels  
15  
-
25  
-
-
-25  
-
-10  
dBm  
dB  
Gain Flatness  
-
-
-
-
-
-
+/- 1.0  
5.5  
Noise Figure  
4.5  
0.3  
+/- 0.2  
0.5  
dB  
Polarization Mode Dispersion  
Polarization Dependent Gain  
Transient Overshoot (10 dB drop)  
0.5  
ps  
+/- 0.5  
1.0  
dB  
dB  
Ordering Information  
Connectors  
Model  
Function  
DWDM C-band EDFA booster optical amplifier, 2 slots  
DWDM single wavelength EDFA booster optical amplifier, 2 slots  
DWDM C-band or single wavelength EDFA in-line/pre-amplifier optical amplifier, 2 slots  
Input / Output  
EM316EDFA-BR  
EM316EDFA-SBR  
EM316EDFA-LPR  
SC/SC  
SC/SC  
SC/SC  
MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com.  
Please e-mail us at sales@mrv.com or call us for assistance.  
MRV Los Angeles  
20415 Nordhoff St.  
Chatsworth, CA 91311  
800-338-5316  
MRV Boston  
295 Foster St.  
Littleton, MA 01460  
800-338-5316  
MRV International  
Business Park Moerfelden  
Waldeckerstrasse 13  
64546 Moerfelden-Walldorf  
Germany  
818-773-0900  
978-952-4700  
Tel. (49) 6105/2070  
Fax (49) 6105/207-100  
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the  
accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information.  
MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.  
MRV-FD-OA-083008  
1398001-001 Rev. A5  
Copyright ©2008 MRV Communications, Inc. All Rights Reserved.  

EM316EDFA-BR 相关器件

型号 制造商 描述 价格 文档
EM316EDFA-LPR MRV Optical Amplifi ers 获取价格
EM316EDFA-SBR MRV Optical Amplifi ers 获取价格
EM316EFRM-M MRV Copper-to-Fiber Media Converters 获取价格
EM316EFRM-S1 MRV Copper-to-Fiber Media Converters 获取价格
EM316EFRM-S2 MRV Copper-to-Fiber Media Converters 获取价格
EM316EFRM-S3 MRV Copper-to-Fiber Media Converters 获取价格
EM316EFRMAHSH-5 MRV Optical Ethernet Services Demarcation - 802.3ah 获取价格
EM316ERM-M MRV Copper-to-Fiber Media Converters 获取价格
EM316ERM-MX MRV Copper-to-Fiber Media Converters 获取价格
EM316ERM-S1 MRV Copper-to-Fiber Media Converters 获取价格

EM316EDFA-BR 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6