10BXUA-K [MSYSTEM]
High-density Signal Conditioners 10-RACK;型号: | 10BXUA-K |
厂家: | M-SYSTEM |
描述: | High-density Signal Conditioners 10-RACK |
文件: | 总3页 (文件大小:91K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 10BXUA
High-density Signal Conditioners 10-RACK
RELATED PRODUCTS
• Blank filler plate (model: P-101)
STANDARD RACK
(2 positions, with air manifold)
GENERAL SPECIFICATIONS
Construction: Metal plates assembly
Coating: Zn-Cr (black), alumetized steel
Capacity: 2 positions
Functions & Features
• Standard rack for I/P transducers (model: 10VP)
• Line power supplied via the rear rack bus
• Supply pressure at the manifold plug
• Other 10-Rack signal conditioners are also mountable
Connection
Output: M3.5 screw terminals (torque 0.8 N·m)
Pneumatic: Rc 3/8" female (torque ≤12 N·m)
Power input: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Manifold: Aluminium alloy
Isolation: I/O to power to FG
INSTALLATION
Power input
•AC: 85 – 132 V, 47 – 63 Hz, 15 VA maximum
•DC: 24 V DC ±10 %, (ripple 10 % p-p max.)
Operating temperature: -5 to 55°C (23 to 131°F)
0 to 55°C (32 to 131°F) for AC power
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Angle bracket
MODEL: 10BXUA–[1][2]
ORDERING INFORMATION
• Code number: 10BXUA-[1][2]
Specify a code from below for each [1] and [2].
(e.g. 10BXUA-K/Q)
Weight: 2 kg (4.4 lb)
PERFORMANCE
• Specify the specification for option code /Q
(e.g. /C01)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(I/O to power to FG)
Maximum supply pressure: 196 kPa
[1] POWER SUPPLY UNIT
AC Power
(2 kgf/cm , 1.96 bar, 28 psig)
2
K: 85 – 132 V AC
(Operational voltage range 85 – 132 V, 47 – 63 Hz)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Power supply and signal conditioner side of the main PWB are not coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
http://www.m-system.co.jp/
10BXUA SPECIFICATIONS
ES-0895 Rev.1 Page 1/3
MODEL: 10BXUA
MOUNTING REQUIREMENTS unit: mm (inch)
ANGLE BRACKET
2−M4 SCREW
CONNECTION DIAGRAM
5
6
7
1
2
3
4
U(+)
V(−)
+
−
+
−
POWER
Ch.1 OUTPUT 2* or INPUT
Ch.2 OUTPUT 2* or INPUT
FG
SUPPLY
PRESSURE
*Replaced with OUTPUT 1 for one output model.
http://www.m-system.co.jp/
10BXUA SPECIFICATIONS
ES-0895 Rev.1 Page 2/3
MODEL: 10BXUA
DIMENSIONS unit: mm (inch)
AIR MANIFOLD
TERMINAL COVER
SUPPLY CONNECTION
Rc 3/8”
1
1
2
2
3
4
5
6
7
116 (4.57)
Specifications are subject to change without notice.
http://www.m-system.co.jp/
10BXUA SPECIFICATIONS
ES-0895 Rev.1 Page 3/3
相关型号:
10C
RESISTOR, WIRE WOUND, 10W, 0.1; 0.25; 0.5; 1; 3; 5%, 30; 100; 200ppm, 0.1ohm - 90000ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
OHMITE
©2020 ICPDF网 联系我们和版权申明