概述
数据手册10DY-AE0/C02 概述
High-density Signal Conditioners 10-RACK
10DY-AE0/C02 数据手册
通过下载10DY-AE0/C02数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: 10DY
Voltage
High-density Signal Conditioners 10-RACK
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 100 Ω min.)
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
CURRENT LOOP SUPPLY
(isolated)
Functions & Features
• Powering a 4 – 20 mA DC current loop
• Shortcircuit protection
• Optional second channel output available at the front
terminals and at the Standard Rack connector
• Applicable to smart transmitters
• With power switch selectable
[2] OUTPUT 2
0: None
Voltage
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
Typical Applications
• Various 2-wire transmitters
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[3] OPTIONS (multiple selections)
Power Switch
blank: None
/S: With power switch
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: 10DY–A[1][2]–R[3]
/C02: Polyurethane coating
/C03: Rubber coating
ORDERING INFORMATION
• Code number: 10DY-A[1][2]-R[3]
Specify a code from below for each [1] through [3].
(e.g. 10DY-A66-R/S/Q)
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear; terminal cover provided
• Specify the specification for option code /Q
(e.g. /C01)
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Card-edge connector and M3.5 screw terminals
(torque 0.8 N·m)
INPUT
Current
A: 4 – 20 mA DC (Input resistance 300Ω)
Power input: Supplied from card-edge connector
Screw terminal: Nickel-plated steel
[1] OUTPUT 1
Current
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
Span adjustment: 95 to 105 % (front)
With power switch (front, factory setting: ON)
http://www.m-system.co.jp/
10DY SPECIFICATIONS
ES-0826 Rev.8 Page 1/3
MODEL: 10DY
SUPPLY OUTPUT
Output voltage: 24 – 28 V DC with no load
16 V DC at 20 mA
Current rating: ≤ 22 mA DC
∙Shortcircuit Protection
Current limited: Approx. 35 mA
Protected time duration: No limit
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
OUTPUT SPECIFICATIONS
The output goes below 0 % when the input is open.
INSTALLATION
Current consumption: Approx. 55 mA with voltage output 1
Approx. 80 mA with current output 1
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 10BXx
Weight: 200 g (0.44 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Line voltage effect
Supply output: ±0.5 % over voltage range
Output signal: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(input to output 1 to output 2 to power)
1500 V AC @ 1 minute (input or output or power to ground)
EXTERNAL VIEW
■ POWER SWITCH
Power supply can be turned off.
Right: ON, left: OFF
1
5
2
6
3
Power Switch*
PWR
ON
OFF
ZERO
SPAN
7
8
*Only for option /S
http://www.m-system.co.jp/
10DY SPECIFICATIONS
ES-0826 Rev.8 Page 2/3
MODEL: 10DY
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7–M3.5 SCREW
8 (.31)
2–4.3 (.17) dia.
MTG HOLE
TERMINAL COVER
1
5
2
6
3
7
8
3 (.12)
25 (.98)
51 (2.01)
130 (5.12)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
2-WIRE
TRANSMITTER
Isolation
50Ω
Current
Limiter
Output
Driver
+
+
–
+
–
1
2
3
7
8
OUTPUT 1
OUTPUT 2
Voltage/
Duty Cycle
–
+
V
250Ω 0.1%
Z
S
Z
S
–
Output
Driver
+
–
5
6
MONITOR
(1 – 5V DC)
OUTPUT 2*1
2
*
POWER
*1 Output type has the output 1 connected to the card-edge connector in parallel.
*2 Only with power switch.
Remark 1) The section enclosed by broken line is only for 2nd output channel.
Specifications are subject to change without notice.
http://www.m-system.co.jp/
10DY SPECIFICATIONS
ES-0826 Rev.8 Page 3/3
10DY-AE0/C02 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 10DY-AE0/C03 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AE0/S | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AE6 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AE6/C01 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AE6/C02 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AE6/C03 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AE6/S | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AF0 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AF0/C01 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
| 10DY-AF0/C02 | MSYSTEM | High-density Signal Conditioners 10-RACK | 获取价格 |
|
10DY-AE0/C02 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
