首页 > 10JV-H60-R

10JV-H60-R

更新时间：2024-10-29 23:17:20

品牌：MSYSTEM

描述：High-density Signal Conditioners 10-RACK

PDF下载

中文翻译

PCB计价

概述
数据手册

如果您发现信息不准确，欢迎纠错

10JV-H60-R 概述

High-density Signal Conditioners 10-RACK

10JV-H60-R 数据手册

通过下载10JV-H60-R数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

MODEL: 10JV

High-density Signal Conditioners 10-RACK

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

SIGNAL TRANSMITTER

(field-programmable)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

Functions & Features

• Converting a DC input into two standard process signals

• Micro-processor based

[3] OUTPUT 2

• Field-programmable input range

0: None

• Loop testing via hand-held programmer PU-2x

• Optional second channel output available at the front

terminals and at the Standard Rack connector

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

Typical Applications

• Isolation between control room and field instrumentation

• Ideal for quick spare part

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

MODEL: 10JV–[1][2][3]–R[4]

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

ORDERING INFORMATION

• Code number: 10JV-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10JV-6A6-R/Q)

• Special input range (For codes U1, U2 & U3)

• Specify the specification for option code /Q

(e.g. /C01)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

[1] INPUT

Current

Connection

A: 4 – 20 mA DC (Input resistance 250 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

U1: Range ±100 mV;

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

(Minimum span 3 mV, Input resistance 20 kΩ min.)

U2: Range ±1000 mV;

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Adjustments: Programming Unit (model: PU-2x); Input

(Minimum span 30 mV, Input resistance 20 kΩ min.)

U3: Range ±10 V;

(Minimum span 0.3 V,Input resistance 1 MΩ min.)

http://www.m-system.co.jp/

10JV SPECIFICATIONS

ES-0862 Rev.9 Page 1/3

MODEL: 10JV

range, zero and span, simulating output, etc.

(Input range can be changed with Codes U1, U2 or U3 and

limited within ranges of each code type.)

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON.)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

■ DC Voltage: -10 – +10 V DC

Minimum span: 3 mV

Offset: Max. 3 times span

Default setting will be used if not otherwise specified.

U1: 0 – 100 mV DC

U2: 0 – 1 V DC

U3: 0 – 10 V DC

OUTPUT SPECIFICATIONS

With the input voltage code 6, U3 (0 % ≥ 0 V) and current,

the output goes below 0 % when the input is open.

INSTALLATION

Current consumption: Approx. 60 mA with voltage output 1

Approx. 90 mA with current output 1

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 220 g (0.49 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

http://www.m-system.co.jp/

10JV SPECIFICATIONS

ES-0862 Rev.9 Page 2/3

MODEL: 10JV

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Digital

Computation

Output

Driver

–

INPUT

OUTPUT 1

OUTPUT 2

–

Output

Driver

–

MODULAR JACK

PU-2x

SERIAL TRANSMISSION LINE

OUTPUT 2**

POWER

* Input shunt resistor incorporated for current input.

**1 output type has the output 1 connected to the card-edge connector in parallel.

Remark 1) The section enclosed by broken line is only for 2nd output channel.

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10JV SPECIFICATIONS

ES-0862 Rev.9 Page 3/3

10JV-H60-R 相关器件

型号	制造商	描述	价格	文档
10JV-H66-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-HA0-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-HA6-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U160-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U166-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U1A0-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U1A6-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U260-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U266-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格
10JV-U2A0-R	MSYSTEM	High-density Signal Conditioners 10-RACK	获取价格