15PV-76-R/A2 [MSYSTEM]
Dual Channel Input/Output Isolators 15-RACK;型号: | 15PV-76-R/A2 |
厂家: | M-SYSTEM |
描述: | Dual Channel Input/Output Isolators 15-RACK |
文件: | 总2页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 15PV
/A3: 3 – 15 psig
Other Options
blank: none
Dual Channel Input/Output Isolators 15-RACK
P/I TRANSDUCER
/Q: Option other than the above (specify the specification)
Functions & Features
• Converting a standard pneumatic signal into a
proportional DC output
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• 2 channels available; accomplishing economical and
space-saving multi-input processing
/C02: Polyurethane coating
/C03: Rubber coating
RELATED PRODUCTS
• EXTENDER CARD (model:10EC)
Necessary to adjust span.
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear
MODEL: 15PV–[1]6–R[2]
Connection
Output: Card-edge connector
Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female
(torque ≤ 12 N·m)
ORDERING INFORMATION
• Code number: 15PV-[1]6-R[2]
Specify a code from below for each [1] and [2].
(e.g. 15PV-26-R/A2S/Q)
Power input: Suplied from card edge connector
Materials
Housing: flame-resistant resin (black)
Base: Die cast aluminium
• Specify the specification for option code /Q
(e.g. /C01)
Overrange output: Approx. -10 to +120 %
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (top)
[1] PNEUMATIC CONNECTION
2: Rc 1/4"
5: Rc 1/8" fitting
INPUT SPECIFICATIONS
7: 1/4" NPT fitting
■ Input
19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm
2
OUTPUT
Voltage
20 – 100 kPa, 0.2 – 1.0 bar
20.7 – 103.4 kPa, 3 – 15 psig
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
INSTALLATION
POWER INPUT
DC Power
Current consumption: Approx. 30 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 15BX
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Weight: 190 g (0.42 lb)
[2] OPTIONS (multiple selections)
Pressure Range
blank: 0.2 - 1.0kgf/cm
/A1S: 19.6 – 98.1 kPa
/A2S: 20 – 100 kPa
2
/A3S: 20.7 – 103.4 kPa
/A2: 0.2 – 1.0 bar
15PV SPECIFICATIONS
ES-0620 Rev.11 Page 1/2
http://www.m-system.co.jp/
MODEL: 15PV
PERFORMANCE in percentage of span
Accuracy: ±0.2 %
Temp. coefficient: ±0.03 %/°C (±0.02 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28
psig)
Line voltage effect: ±0.1 % over voltage range
Dielectric strength: 1500 V AC @ 1 minute
(Output or power to ground)
DIMENSIONS unit: mm (inch)
2–4.3 (.17) dia.
MTG HOLE
**FITTING
SUPPLY CONNECTION
Rc 1/4”, Rc 1/8” or 1/4” NPT
3 (.12)
approx.
25 (.98)
27 (1.06)
*
20 (.79)
130 (5.12)
[13 (.51)]
* [ ] for Rc 1/8".
**Fitting provided for Rc 1/8" or 1/4" NPT connection.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Semiconductor
Pressure Sensor
Low Drift
Amplifier
Output
Driver
Ch.1 INPUT
Ch.2 INPUT
Ch.1 OUTPUT
Z
S
Semiconductor
Pressure Sensor
Low Drift
Amplifier
Output
Driver
Ch.2 OUTPUT
POWER
Specifications are subject to change without notice.
15PV SPECIFICATIONS
ES-0620 Rev.11 Page 2/2
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明