18KJDN [MSYSTEM]

Rack-mounted DCS Signal Conditioners 18K-RACK;
18KJDN
型号: 18KJDN
厂家: M-SYSTEM    M-SYSTEM
描述:

Rack-mounted DCS Signal Conditioners 18K-RACK

DCS 分布式控制系统
文件: 总4页 (文件大小:116K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MODEL: 18KJDN  
Rack-mounted DCS Signal Conditioners 18K-RACK  
[1] OPTIONS  
Power Switch  
blank: None  
CURRENT LOOP SUPPLY  
(with square root extractor)  
/S: With power switch  
Functions & Features  
• 2-wire transmitter circuit with short-circuit protection  
• Applicable to smart transmitters  
• Can also be used as a 4 - 20 mA DC square root extractor  
• Module can be retracted without removing wiring for an  
insulation test  
RELATED PRODUCTS  
• Programming Unit (model: PU-2x)  
• PC configurator software (model: JXCON)  
Downloadable at M-System’s web site.  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual for the PC configurator for applicable  
cable types.  
• Optional power switch  
Typical Applications  
• Various 2-wire transmitters  
GENERAL SPECIFICATIONS  
Construction: Rack-mounted; terminal access via screw  
terminals on the front and connector on the rear; terminal  
cover provided  
Connection  
Input: M3.5 screw terminals (torque 0.8 N·m)  
and connector  
Output 1: Connector  
Output 2: M3.5 screw terminals (torque 0.8 N·m)  
and connector  
MODEL: 18KJDN–A66–R[1]  
Power input: Supplied from connector  
Screw terminal: Nickel-plated steel  
Isolation: Input to output 1 to output 2 to power  
Overrange output: 0 – 105 % at 1 – 5 V  
Adjustments: Programming Unit (model: PU-2x);  
(For settings programable with JXCON, refer to its  
instruction manual)  
ORDERING INFORMATION  
Code number: 18KJDN-A66-R[1]  
Specify a code from below for [1].  
(e.g. 18KJDN-A66-R/S)  
•Zero and span  
INPUT  
Current  
Low-end cutout: Output is proportional to input when the  
output is less than approx. 5 %  
A: 4 – 20 mA DC (Input resistance 250 Ω)  
OUTPUT 1  
Voltage  
Approx. 6%  
Approx. 5%  
6: 1 – 5 V DC (Load resistance 2000 Ω min.)  
0
OUTPUT 2  
INPUT  
Voltage  
6: 1 – 5 V DC (Load resistance 2000 Ω min.)  
SUPPLY OUTPUT  
Output voltage: 24 – 28 V DC with no load  
Current rating: ≤ 22 mA DC  
Shortcircuit Protection  
POWER INPUT  
DC Power  
R: 24 V DC  
Current limited: 30 mA max.  
Protected time duration: No limit  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
18KJDN SPECIFICATIONS  
ES-0425 Rev.2 Page 1/4  
http://www.m-system.co.jp/  
MODEL: 18KJDN  
INPUT SPECIFICATIONS  
DC Current: Input resistor incorporated  
OUTPUT SPECIFICATIONS  
The output goes below 0 % when the input is open.  
INSTALLATION  
Current consumption: Approx. 85 mA  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Standard Rack 18KBXx  
Weight: 150 g (0.33 lb)  
PERFORMANCE in percentage of span  
Accuracy: ±0.25 % (input 1 – 100 %)  
Temp. coefficient: ±0.03 %/°C (±0.02 %/°F)  
Response time: ≤ 0.5 sec. (0 – 90 %)  
Line voltage effect  
Output signal: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 500 V AC @ 1 minute (input to output 1  
to output 2 to power to ground)  
EXTERNAL VIEW  
WITH POWER SWITCH  
7
8
5
1
6
2
Power Switch  
Modular Jack  
3
4
18KJDN SPECIFICATIONS  
ES-0425 Rev.2 Page 2/4  
http://www.m-system.co.jp/  
MODEL: 18KJDN  
EXTERNAL DIMENSIONS unit: mm (inch)  
2–M3  
SCREW  
8–M3.5  
7 (.28)  
SCREW  
7 (.28)  
24 (.94)  
32 (1.26)  
78 (3.07)  
TERMINAL ASSIGNMENTS  
7
8
5
6
1
2
3
4
18KJDN SPECIFICATIONS  
ES-0425 Rev.2 Page 3/4  
http://www.m-system.co.jp/  
MODEL: 18KJDN  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
Z
S
Isolation  
Short-Circuit  
Output  
Driver  
+
1
5
6
Protection  
OUTPUT 2  
Module  
Field Terminals  
(Section A)  
Digital  
2
3
4
7
8
Computation  
Output  
Driver  
250Ω  
OUTPUT 1  
OUTPUT 2  
External  
Field Terminals  
(Section A)  
MODULAR JACK  
PU-2x  
*
Serial Transmission Line  
POWER  
* With power switch only  
Use either of module or external field terminals.  
Section A. Field Terminals  
¢
¢
When Used as Sq. Root Extractor  
When Used as Current Loop Supply  
2-WIRE  
TRANSMITTER  
No  
+
1
1
2
3
+
Connection  
2
3
-
+
+
250Ω  
4 - 20mA DC  
MONITOR  
1 - 5V DC  
V
Specifications are subject to change without notice.  
18KJDN SPECIFICATIONS  
ES-0425 Rev.2 Page 4/4  
http://www.m-system.co.jp/  

相关型号:

18KJDN-A66-R

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJDN-A66-R/S

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJM

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJM-166-R

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJM-166-R/S

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA-166-R

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA-166-R/S

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA-266-R

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA-266-R/S

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA-366-R

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM

18KJPA-366-R/S

Rack-mounted DCS Signal Conditioners 18K-RACK
MSYSTEM