73VR3100-N-M2_技术文档

MODEL: 73VR3100

Paperless Recording System

[2] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

PAPERLESS RECORDER

(Selectable input modules; TFT LCD display)

Functions & Features

47 – 66 Hz)

DC Power

R: 24 V DC

• 20 msec. storing rate with the combination of 8 analog

and 8 discrete inputs

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• 0.1 sec. storing rate with 16 channels; 0.5 sec. with 64

channels

[3] OPTIONS

• Data stored in CF Cards and SD Cards

• Indicated interval data stored in USB memory as CSV file

operable (even during storing)

blank: none

/Q: With options (specify the specification)

• Memory card slot accessible at the front

• Dedicated application software to view and analyze the

data

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Touch panel operation

/C02: Polyurethane coating

• IP65 front panel

/C03: Rubber coating

• Display and storing of the data sent from PLC in

combination with Gateway module

• Setting and operation from PLC (Remote Mode)

INSTALLATION

/HA: Desktop type (with handle and feet)

(Desktop type cannot be mounted on a panel surface.

The handle and rubber feet cannot be detached.)

144 (5.67)

RELATED PRODUCTS

• PC Configurator cable (model: MCN-CON or COP-US)

• PC configurator software (model: R3CON)

• Clamp-on current sensor (model: CLSA, CLSB, CLSE)

• Special cable for the CLSA-08, -12 (model: CLSA-08C-30)

■ Memory card

144

(5.67)

245.1

(9.65)

A memory card is required to store data in the 73VR3100.

Available for purchase from M-System. Consult M-System

(except SD/CF conversion adapter).

M-System will not guarantee the product’s described

performance if a memory card other than purchased from M

-System, or specified below, is used.

• CF Card

mm (inch)

MODEL: 73VR3100-[1]-[2][3]

ORDERING INFORMATION

• Code number: 73VR3100-[1]-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. 73VR3100-E-M2/Q)

1. Manufacturer: Hagiwara Solutions

Model No.: MCF10P-xxxxS

Capacity: 128 MB through 1 GB

(CFI-xxxxDG ... discontinued)

• I/O and network modules

2. Manufacturer: Apacer Technology

Model name: CFC III

(Use Ordering Information Sheet No. ESU-7397)

• Specify the specification for option code /Q

(e.g. /C01/HA)

Model No.: AP-CFxxxxE3NR-ETNDNRQ

Capacity: 256 MB through 1 GB

Part No.: 81.27L20.TB47C (256 MB)

81.29910.TB37C (512 MB)

[1] LANGUAGE

N: Japanese

81.29920.TB37C (1 GB)

(AP-CFxxxxE3ER-ETNDNR, AP-CFxxxxE3ER-ETNDNRK ...

discontinued)

E: English

• SD Card (Compatible with 73VR3100 Ver.6.02.xx or later)

Manufacturer: Hagiwara Solutions

Model No.: NSD6-004GH (B21SEI

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 1/14

http://www.m-system.co.jp/

MODEL: 73VR3100

(NSDA-004GT, NSDA-004GL ... discontinued)

SD/CF Conversion Adapter is required to use SD card. There

are some restrictions on using SD card. For details, refer to

the instruction manual.

TS8: Thermocouple input, 8 ch.

RS4: RTD input, 4 ch.

RS8: RTD input, 8 ch.

MS4: Potentiometer input, 4 ch.

MS8: Potentiometer input, 8 ch.

US4: Universal input, 4 ch.

• SD/CF Conversion Adapter (operation confirmed):

DeLOCK adaptor CF II to SDHC,SDXC

Model: 61796 (operation has been confirmed with the

adapter purchased in the year of 2016.)

DS4: 4 – 20 mA input with excitation, 4 ch.

DS4A: 4 – 20 mA input w/exc. (switch provided), 4 ch.

DS8N: 4 – 20 mA input with excitation, 8 ch., non-isolated

CT4: CT (AC current) input, 4 ch.

CT4A: AC current input, 4 ch., clamp-on current sensor CLSA

use

62637 (operation has been confirmed with the

adapter purchased in the year of 2018.)

Note: Refer to the data sheets of the respective models.

CT4B: AC current input, 4 ch., clamp-on current sensor CLSB

use

PACKAGE INCLUDES...

• 73VR Application Software CD (model: 73VRPAC2)

CT4C: AC current input, 4 ch., clamp-on current sensor CLSB

-R5 use

• Mounting brackets (two)

(/HA: Not included for desktop type)

CT8A: AC current input, 8 ch., clamp-on current sensor CLSA

use

I/O, INTERFACE I/O, AND NETWORK MODULE

■ COMMON INSTRUCTION

CT8B: AC current input, 8 ch., clamp-on current sensor CLSB

use

Use Ordering Information Sheet (No. ESU-7397) to specify

the types of I/O module, network module and interface I/O

module (gateway module). The total current consumption of

all mounted modules must be within 560 mA (continuous).

Please refer to the respective data sheet for detailed

specifications of each module.

CT8C: AC current input, 8 ch., clamp-on current sensor CLSB

-R5 use

PT4: PT (AC voltage) input, 4 ch.

CZ4: Zero-phase current input, 4 ch.

WT4: AC power input, 4 points

WT4A: AC power input, 4 ch., clamp-on current sensor CLSA

use

■ SELECTABLE I/O MODULES

R3 Series I/O modules as listed below are used for the

73VR3100.

WT4B: AC power input, 4 ch., clamp-on current sensor CLSB

use

WTU: AC power input, 2 ch., clamp-on current sensor CLSE

use (Communication Mode ‘S’only)

LC2: Strain gauge input, 2 ch.

● I/O MODULE

R3–[1][2]

Pulse Input

PA2: Encoder input, 2 ch. (speed and position)

PA4: High speed pulse input, 4 ch.

PA4A: High speed totalized pulse input, 4 ch.

PA4B: Low speed totalized pulse input, 4 ch.

PA8: Totalized pulse input, 8 ch.

PA16: Totalized pulse input, 16 ch.

Discrete Input

[1] MODEL

Analog Input

SS4: DC current input, 4 ch.

SS8: DC current input, 8 ch.

SS8N: DC current input, 8 ch., non-isolated

SS16N: DC current input, 16 ch., non-isolated

SV4: DC voltage input, 4 ch.

DA16: Optical isolation discrete input, 16 ch. (13 V DC)

Discrete Output

SV4A: DC voltage input, 4 ch., narrow span

SV4B: DC voltage input, 4 ch., wide span

SV4C: DC voltage input, 4 ch., wide span ±50 V

SV8: DC voltage input, 8 ch.

DC16: Relay output, 16 ch.

DC32A: Open collector output, 32 ch.

(Limited to two discrete output modules at the maximum.)

Discrete I/O

SV8A: DC voltage input, 8 ch., narrow span

SV8B: DC voltage input, 8 ch., wide span

SV8C: DC voltage input, 8 ch., wide span ±50 V

SV8N: DC voltage input, 8 ch., non-isolated

SV16N: DC voltage input, 16 ch., non isolated

TS4: Thermocouple input, 4 ch.

DAC16A: Discrete input output module (Di 8 ch., Do 8 ch.)

(Limited to one discrete I/O module at the maximum.)

Alarm

AS4: DC current input alarm, 4 ch.

AS8: DC current input alarm, 8 ch.

AV4: DC voltage input alarm, 4 ch.

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 2/14

http://www.m-system.co.jp/

MODEL: 73VR3100

AV8: DC voltage input alarm, 8 ch.

AT4: Thermocouple input alarm, 4 ch.

AR4: RTD input alarm, 4 ch.

or CLSB or CLSE).

The CLSA is used for the R3-CT4A and R3-CT8A and R3-

WT4A.

AD4: 4 – 20 mA input alarm w/exc., 4 ch.

Blank Filler Module

The CLSB is used for the R3-CT4B and R3-CT8B and R3-

WT4B.

DM: Blank filler module (Communication mode suffix code is

not applicable to the blank filler module.)

The CLSB-R5 is used for the R3-CT4C and R3-CT8C.

The CLSE is used for the R3-WTU.

[2] COMMUNICATION MODE

S: Single

● R3-PA2

W: Dual (Select the /W code when a Network Module is

used.)

The R3-PA2 can handle a data range of -1 000 000 000 to 1

000 000 000 to represent encoder’s positions, while the

73VR3100 can handle only from 0 to 1 000 000 000.

Be sure that the input to the R3-PA2 remains within this

range.

● I/O MODULE WITH CONNECTOR TERMINAL

R3Y–[1][2]

The R3-PA2’s alarm output cannot be triggered from the

73VR3100.

[1] MODEL

Analog Input(FCN connector)

● R3-DAC16A

SS8: DC current input, 8 ch.

Mode setting is aveilable only for continuous output mode.

SS8N: DC current input, 8 ch., non-isolated

SV8: DC voltage input, 8 ch.

SV8N: DC voltage input, 8 ch., non-isolated

SV16N: DC voltage input, 16 ch., non-isolated

RS8: RTD input, 8 ch.

MS8: Potentiometer input, 8 ch.

Pulse Input(FCN connector)

PA16: Totalized pulse input, 16 ch.

Discrete Input(FCN connector)

DA16: Optical isolation discrete input, 16 ch. (13 V DC)

Discrete Output(FCN connector)

DC16: Realy output 16 ch. (Limited to two discrete output

modules at the maximum.)

[2] COMMUNICATION MODE

S: Single

W: Dual (Select the /W code when a Network Module is

used.)

● R3-CTxA, R3-CTxB, R3-WT4x, R3-WTU

In order to use models R3-CTxA, R3-CTxB, R3-WT4x and R3-

WTU, the data range must be set up with the R3

Configurator Software (model: R3CON). This change of

setting may lower the resolution of recorded data for certain

input ranges.

The R3CON Configurator Software is available for

downloading at M-System’s web site. A special cable is

required to connect the R3 modules to a PC.

The Clamp-on Current Sensors, NOT included in the product

package of the R3 modules, must be purchased separately.

Please refer to data sheet for the respective models (CLSA

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 3/14

http://www.m-system.co.jp/

MODEL: 73VR3100

[1] MODEL

■ STORING RATE

NC1: CC-Link (Ver. 1; 16-point analog)

NC2: CC-Link (Ver. 1; 32-point analog)

NC3: CC-Link (Ver. 2)

Possible storing rates depend upon the I/O module types.

STORING RATE

TYPE

20ms

Y

0.1s

Y

≥ 0.5s

Y

R3-SS4

ND1: DeviceNet (16-point analog)

ND2: DeviceNet (32-point analog)

ND3: DeviceNet (64-point analog)

NE1: Ethernet (Modbus/TCP)

NF1: T-Link (Fuji Electric)

R3(Y)-SS8

R3(Y)-SS8N

R3-SS16N

R3-SV4

---

Y

R3-SV4A

R3-SV4B

R3-SV4C

R3(Y)-SV8

R3-SV8A

R3-SV8B

R3-SV8C

R3(Y)-SV8N

R3-SV16N

R3Y-SV16

R3-TS4

Y

NM1: Modbus

---

Y

---

Y

NP1: PROFIBUS-DP

NL1: LonWorks (16-point analog)

POWER INPUT

Y

N: No power supply

---

Y

R3-TS8

R3-RS4

● CAUTIONS OF USING THE R3 SERIES NETWORK MODULE

One R3 Series network module is mountable at the position

of I/O Module 4. In the dual communication mode, the

73VR3100 is automatically defined as ‘main’ bus, while the

R3 network is as ‘sub.’ The R3 network module cannot

output through output modules. Choose I/O modules with

dual communication mode (code ‘W’).

R3(Y)-RS8

R3-US4

R3-DS4

R3-DS4A

R3-DS8N

R3-CT4

R3-CT4A

R3-CT4B

R3-CT4C

R3-CT8A

R3-CT8B

R3-CT8C

R3-PT4

Y

---

Y

---

Y

■ SELECTABLE INTERFACE I/O MODULE (GATEWAY

MODULE)

R3 Series interface I/O modules as listed below are usable

for the 73VR3100.

R3-PA2

R3-PA4

R3-PA4A

R3-PA4B

R3-PA8

R3(Y)-PA16

R3-WTU

R3-WT4

R3-WT4A

R3-WT4B

R3-MS4

R3-[1]S

[1] MODEL

GC1: CC-Link (Ver.1.10/Ver.2.00)

GD1: DeviceNet (for 64-point analog signals)

GE1: Modbus/TCP (Ethernet)

GM1: Modbus (RS-485)

R3(Y)-MS8

R3-LC2

R3-CZ4

---

Y

GFL1: FL-net (Ver. 2.0; OPCN-2)

R3-AS4

R3-AS8

R3-AV4

R3-AV8

R3-AD4

R3-AT4

R3-AR4

---

Y

COMMUNICATION MODE

S: Single

---

Y

---

Y

---

Y

---

■ CAUTIONS OF USING THE R3 SERIES INTERFACE I/O

MODULE

R3(Y)-DA16

R3(Y)-DC16

R3-DC32A

R3-DAC16A

•Interface I/O Modules support analog data only, not for

digital data.

[Legend] Y = Selectable, --- = Not Selectable

•73VR3100 cannot output analog data. Only analog data

input via Interface I/O Module is available.

•73VR3100 can receive maximum 64 words for input data.

•Storing Interval 20 msec. is not supported. When

73VR3100 is in Remote Mode, storing Interval 20 msec. and

100 msec. are not supported.

■ SELECTABLE NETWORK MODULES

R3 Series network modules as listed to below are usable for

the 73VR3100.

R3–[1]–N

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 4/14

http://www.m-system.co.jp/

MODEL: 73VR3100

Weight: 2.3 kg (5.1 lb) except I/O modules

GENERAL SPECIFICATIONS

Construction: Panel mount type or desktop type

Degree of protection: IP65; applicable to the front panel of

the recorder with single mounting according to the specified

panel cutout (/HA: Desktop type cannot be mounted on a

panel surface)

Caution: Use of UPS (switching time: without delay, output:

sine waveforms) is recommended to prevent data loss or CF

card damage by a loss of power during recording.

PERFORMANCE

Calendar clock accuracy: Monthly deviation 3 minutes at

■ CONNECTION

Power input: Euro type connector terminal

25°C

Applicable wire size: 0.2 – 2.5 mm or AWG 24 – 12 for both

2

Insulation resistance: ≥ 100 MΩ with 500 V DC (power to

Ethernet to FG)

stranded and solid wires. stripped length 7 mm. Use pin

terminals with stranded wires.

Refer to respective data sheet of R3 Series for I/O

insulation.

Ethernet: RJ-45 Modular Jack

■ MATERIALS

Dielectric strength

Enclosure: Steel

AC power: 2000 V AC @1 minute (power to Ethernet or FG)

500 V AC @1 minute (Ethernet to FG)

DC power: 1250 V AC @1 minute (power to Ethernet or FG)

500 V AC @1 minute (Ethernet to FG)

Refer to respective data sheet of R3 Series for I/O and I/O-to

-FG strength.

Bezel: Flame-resistant resin (black)

Front filter: Transparent resin

■ INTERFACE

Ethernet: 10BASE-T / 100BASE-TX automatically switched;

Conforms to IEEE 802 (10BASE-T) or IEEE 802.3 (100BASE-

TX)

IP address: 192.168.0.1 (factory default setting)

Subnet mask: 255.255.255.0 (factory default setting)

Default gateway: None (factory default setting)

CF Card slot: Type I; for use with the cards’ operating

voltage 3.3 V

USB: Conforms to Version 1.1

■ DISPLAY

Display device: 5.5-inch TFT LCD

Display colors: 256

Resolution: 320 × 240 pixels

Pixel pitch: 0.12 × 0.35 mm

Note: The backlight can be replaced in M-System factory.

The LCD must be replaced at the same time.

INSTALLATION

Power consumption

•AC:

Approx. 36 VA at 100 V

Approx. 46 VA at 240 V

•DC: Approx. 24 W, approx 1.0 A

Operating temperature: 0 to 50°C (32 to 122°F)

Display quality (e.g. decreased contrast) may deteriorate

when the recorder is used for a long time in an environment

exceeding 50°C. However, it is only a temporary

phenomenon. When the recorder is back in normal

temperature, full legibility is recovered. No damage in

performance.

Operating humidity: 30 to 85 %RH (non-condensing)

Allowable dust particles: 0.1 mg/m

2

(no conductive particles)

Corrosive gas: Not allowed

Mounting: Panel flush mounting (except desktop type)

Panel cutout dimensions: 137 × 137 mm (5.39”× 5.39”)

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 5/14

http://www.m-system.co.jp/

MODEL: 73VR3100

APPLICATION SOFTWARE CD

■ 73VRPAC2 (included in the product package)

• 73VR3100 Builder Software: Model 73VR31BLD

Used to configure parameters on the PC.

- Parameter configurations can be downloaded to the recorder via Ethernet.

- Present setting on the 73VR3100 can be uploaded and displayed on the PC.

- Configuration files can be converted into CSV.

• 73VR Data Viewer: Model 73VRWV

Used to show and analyze recorded data on the PC.

- Data stored in the CF Card can be called up on the PC screen via the CF Card Reader.

- Data stored in the CF Card can be sent by FTP and called up on the PC screen.

- Various analyzing functions

- Data and alarm history files can be converted into CSV.

• PC Recorder Software: Model MSR128-V6

- The 73VR3100 data can be sampled and stored in real time via Ethernet by the MSR128-V6.

- Data stored in the CF Card can be sent via Ethernet and called up on the PC screen.

- Data stored in the CF Card can be called up on the PC screen via the CF Card Reader.

• Instruction Manuals

- 73VR3100 users manual

- 73VR31BLD users manual

- 73VRWV users manual

- MSR128-V6 users manual

- 73VR3100 REMOTE MODE Reference Manual

PC REQUIREMENTS (provided by the user)

■ 73VR3100 Builder Software: Model 73VR31BLD

Operating system

Windows 7 Professional (32-bit) or Windows 10 (32-bit, 64-bit)

Note: Proper software functions may not be ensured under certain conditions.

1024 by 768 pixels or better resolution

Screen area

CD drive

Windows supported CD drive is used to install the software program.

Used to read/write the CF Card

Card reader

Mouse

Windows supported

LAN card

LAN card required to connect to Ethernet; 10BASE-T or 100BASE-T cable

■ 73VR Data Viewer: Model 73VRWV

Operating system

Windows 7 Professional (32-bit) or Windows 10 (32-bit, 64-bit)

Note: Proper software functions may not be ensured under certain conditions.

1024 by 768 pixels or higher

Screen area

Display color

65000 colors (16-bit)

Main memory (RAM) 2 GB recommended

CD drive

Card reader

Mouse

Windows supported CD drive is used to install the software program.

Used to read/write the CF Card

Windows supported (Certain functions of the 73VR may be compromised if the mouse’s software driver is

not Windows standard.)

LAN card

LAN card required to connect to Ethernet; 10BASE-T or 100BASE-T cable

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 6/14

http://www.m-system.co.jp/

MODEL: 73VR3100

■ PC Recorder Software: Model MSR128-V6

NORMAL MODE (storing rates ≥ 500 ms)

IBM PC/AT or compatible

HIGH SPEED MODE (storing rates 100 / 200 ms)*¹

PC

Operating system

Windows XP SP1, SP2, SP3, Windows Vista Business (32-bit), Windows 7 Professional (32-bit) or

Windows 10 (32-bit, 64-bit)

Note: Proper software functions may not be ensured under certain conditions.

CPU

Pentium III 800 MHz or higher

1 GHz higher for Windows Vista, Windows 7,

Windows 10

Pentium IV 2.0 GHz or higher

Screen area

Display color

Video memory

Main memory

1024 by 768 pixels or better resolution

65000 colors (16-bit)

2 MB minimum; 4 MB recommended

4 MB minimum

256 MB recommended for Windows XP

512 MB recommended for Windows XP

1 GB recommended for Windows Vista, Windows 7, 1 GB recommended for Windows Vista, Windows 7,

Windows 10

Use an internal hard disk.*²

Windows 10

Use an internal hard disk.*²

Hard disk area

Printer

Max. approx. 100 MB required per day.

Max. approx. 500 MB required per day.

Use a printer for Windows. The programs use Standard System Fonts used in Windows.

Use a printer driver for Standard System Fonts.

Windows supported CD drive is used to install the software program.

CD drive

Card reader drive

Used with devices which save data in a CF Card

RS-232-C port (COM1 through COM5) supported LAN card by Windows

LAN card

Communication port

*1. The 73VR1100 or the 73VR21x cannot be used in High Speed Mode.

*2. External (e.g. SCSI) devices may impair appropriate performance.

EXTERNAL VIEW

■ FRONT VIEW

(1) Touch Panel Screen

(2) Front Cover

(3) CF Card Slot

(7) USB Connector

(4) Eject Button

(6) CF Card Access Indicator LED

(5) Reset Button

■ REAR VIEW

• With I/O Modules

(8) PC Configurator Port

(9) LAN Port

•†Without I/O Modules

• I/O Module Assignment

(7) USB Connector

(

10) I/O Data Allocation

DIP SW

8

7

6

5

4

3

2

1

ON

(11) Power LED

(12) Power Input Terminal Block

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 7/14

http://www.m-system.co.jp/

MODEL: 73VR3100

CONNECTION DIAGRAM

Ethernet

10BASE-T / 100BASE-TX

RJ-45 MODULAR JACK

U (+)

V (–)

POWER

FG

USB

CONFIGURATOR PORT

USB

EXTERNAL DIMENSIONS unit: mm (inch)

· Panel mount type

135.5 (5.33)

151.5 (5.96)

144 (5.67)

245.1 (9.65)

2 – 26 (.08 –1.02)

(panel thickness)

29.5

(1.16)

Attach the mounting bracket either on the top/bottom or on the sides.

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 8/14

http://www.m-system.co.jp/

MODEL: 73VR3100

· Desktop type

135.5 (5.33)

144 (5.67)

245.1 (9.65)

29.5

(1.16)

The handle and rubber feet cannot be detached from desktop type unit.

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 9/14

http://www.m-system.co.jp/

MODEL: 73VR3100

PANEL CUTOUT (unit: mm)

Usable panel thickness: 2 – 26 mm (0.08” – 1.02”)

■ SINGLE MOUNTING

■ VERTICAL CLUSTERED MOUNTING (max. 3 units)

137⁺²

0

L⁺²(mm)

Number

0

2

3

282

426

4

570

175 min

5

714

6

858

■ HORIZONTAL CLUSTERED MOUNTING

7

1002

8

1146

9

1290

10

n

1434

(114 × n) – 6

Notes

1. The R3 I/O modules mounted on the second and the third 73VR3100

from the top cannot be removed in the vertical clustered mounting.

2. Dimensional tolerance 3ꢀ unless otherꢁise specified.

( 0.3 mm for ꢂ 10 mm)

3. Desktop type cannot be mounted on a panel surface.

L ⁺²

0

trigger signal, and stores preset number of samples (max.

1200 respectively) before and after the moment of event.

Remote trigger: Data is automatically recorded while the

external trigger condition (input) is true.

■ STORING RATE

SOFTWARE FUNCTIONS

■ STORING RATE v.s. NUMBER OF INPUT CHANNELS

20 millisec.: 8 analog inputs and 8 discrete inputs

0.1 seconds: Total of 16 analog and/or discrete inputs

0.5 seconds or longer: Total of 64 analog and/or discrete

inputs

20 millisec., 0.1, 0.5, 1, 2, 5, 10 seconds, 1, 10 minutes

■ DATA STORAGE

■ INPUT SIGNALS

• CF card

Analog: DC voltage/current, thermocouple, RTD, AC

voltage/current or pulse

Data file: Stores momentary values in the storing rate and

their calculation result.

Discrete: Contact signals

Alarm history file: Records time index information when

alarms are triggered and reset.

■ DATA STORING METHOD

Normal: Recording is manually initiated and stopped. Data

is continuously stored while the recording is on.

Auto: Recording is automatically initiated and stopped at a

predefined time.

Comment history file: Records comments written in trend

views with time index. Oldest data is overwritten with new

data when the number of records reaches 1000 files.

Configuration file: Stores the 73VR3100 setting.

Event recording: The recorder detects an external event by

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 10/14

http://www.m-system.co.jp/

MODEL: 73VR3100

File format: Binary

Chart speed: pixel(s)/samples

Oldest measured data and alarm history data are

overwritten with new data when the card memory is full.

• USB memory

4 (Not selectable with the storing rate 20 millisec.), 1, 1/5,

1/32, 1/160 (Not selectable with the storing rates 20 msec.

and 0.1 sec.), 1/480 (Not selectable with the storing rates

20 msec. and 0.1 sec.) or 1/960 (Not selectable with the

storing rates 20 msec. and 0.1 sec.)

(Chart speed is described as number of pixels to plot single

data sample.)

Indicated interval data (except alarm history and comment

history) stored in USB memory as CSV file is operable (even

during storing)

■ ALARM (Available with 0.5 sec. or longer storing rates)

• Analog Alarm

Display rate: 1 sec.

Pen thickness: Normal and wide

Alarm setpoints: Max. 4 points per channel

Alarm type: High / Low

Digital indicator: Shows momentary value.

Alarm indicator: Shows alarm status of the channels

displayed on the screen.

Deadband: Set in engineering unit values

Output: At the R3-DC16, R3-DC32A and R3-DAC16A

• Discrete Alarm

Comment: Shows comments entered manually.

Scale: Linear and square root;

Alarm type: Either ON or OFF status can be set as alarm.

Delay time: Alarm trips after a specified time delay.

Output: At the R3-DC16, R3-DC32A and R3-DAC16A

• Alarm Data Storage

Switchable to the engineering unit scale.

Scroll and stop trend view is available (only in Chart speed:

4 or 1)

• Bargraph View

Stored information: Date/time of alarm events (trip and

reset), Pen No., Tag Name and Alarm Message

Number of stored alarm events: Depends upon the CF Card

capacity.

Bargraph direction: Perpendicular or horizontal

Number of pens displayed: 2, 4, 6, 8 per view

Number of display views: 4

Display rate: 1 sec.

128 MB 250 events

Digital indicator: Shows momentary value.

Alarm indicator: Shows alarm status of the channels

displayed on the screen.

256 MB 500 events

512 MB or 1 GB 1000 events

Scale: Linear and square root; Switchable to the engineering

unit scale.

■ CALCULATION FUNCTIONS

Number of channels

20 msec. or 0.1 sec. storing rates: 16 channels

0.5 sec. or longer storing rates: 64 channels

Operations

• Overview

Number of pens displayed: 2, 4, 6, 8, 16 per view

Number of display views: 64

Arithmetic: Addition/subtraction, Multiplication, Division

Logical: AND, OR, NOT, XOR

Display rate: 1 sec.

Alarm indicator: Shows alarm status and date/time of the

last alarm trip and reset for the channels displayed on the

screen.

Mathematical: Square root extractor, Power

Accumulation: Analog accumulation, Pulse accumulation

(per time unit)

Filter: Moving average, First order lag

Hold: Peak (maximum) hold (tracking increasing signal),

Peak (minimum) hold (tracking decreasing signal)

F value: F value

• Retrieve View: Shows data stored in the CF Card.

Number of pens displayed: 2, 4, 6, 8 per view

Number of display views: 4

Data search: Scrolling the chart, specifying a specific time

index, or searching by max./min. values.

Anemoscope: 16 directions

Alarm

Data readout: Reading data pointed by the cursor on the

screen and showing the readout value.

Alarm trip can be programmed for calculated results.

■ DATA DISPLAY FUNCTIONS

• Alarm History View: Shows data stored in the alarm

history file.

From Ver.6.03.09,Overview, Trend and Bargraph views are

updated even while "stop" operation status.

• Trend View

Number of displayed alarm events: 16

Number of display views: 1

Chart direction: Perpendicular or horizontal

Number of pens displayed: 2, 4, 6, 8 per view

Number of display views: 4

Display items: Date/time of alarm events (trip and reset),

Pen No., Tag Name and Alarm Message

Display update: Automatically updated by a new event

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 11/14

http://www.m-system.co.jp/

MODEL: 73VR3100

Supported Function Codes

CODE NAME

Data search: Scrolling the view or specifying a specific time

index.

FUNCTION

Reads DO

01

02

04

05

11

Read Coil Status

Jump: Scroll the view to an alarm event to show the relevant

data on Retrieve View.

Read Input Status

Read Input Register

Force Single Coil

Reads DI

Reads Input Register

Sets DO

• Comment History View: Shows data stored in the

comment history file.

Fetch Communication

Event Counter

Reads Status Word and

Event Counter from

Comm. Event Counter

Number of displayed alarm events: 16

Number of display views: 1

15

Force Multiple Coils

Sets DO (multiple)

Data search: Scrolling the view or specifying a specific time

index.

Exception Response

CODE NAME

FUNCTION

Jump: Scroll the view to a comment to show the relevant

data on Retrieve View.

01

02

Illegal Function

Function Not supported

Illegal Data Address

Speci!ed address does

not exist

■ ETHERNET COMMUNICATION

Monitoring data and setup of the 73VR3100 is possible on

the PC connected via Ethernet.

Supported Function Codes

ADDR. NAME

• Dedicated Protocol

Real time communication: Transmits specific data to a host

PC installed with the PC Recorder Software (model:

MSR128).

Coil (0X)

1...256 Alarm output, discrete output

1...256 Trigger input, discrete input

257...319 Function data (discrete)

Input Status

(1X)

FTP communication: Transmits data stored in the CF Card

using the FTP protocol to a host PC by the 73VR Data Viewer

(model: 73VRWV) installed in it. Data can be transmitted

even during recording.

Input Register

(3X)

1...64

257...

385...

Measured data (analog, 2 bytes)

Measured data (analog, 4 bytes)

Function data (analog, 4 bytes)

Download, Upload: Software configurations created on the

73VR3100 Configuration Builder (model: 73VR31BLD) can

be downloaded to the 73VR3100. The configuration set up

on the 73VR3100 can be uploaded and displayed on the

73VR31BLD.

■ REMOTE MODE

Setting and operation from PLC is available in combination

with interface I/O modules.

Please refer to the 73VR3100 REMOTE MODE Reference

Manual for detailed information.

• Modbus Protocol

Protocol: Modbus/TCP

■ OTHER FUNCTIONS

Port No.: 502 (fixed)

• Operation Lockout

IP address: Set on the recorder

With a password setting, unauthorized operations on the

Trend View, Bargraph View and Overview can be locked out.

• Data File Used Volume Information

A bargraph with % indication is provided on the screen to

show how much percent of the data file memory has been

used up.

Subnet mask: Set on the recorder

Default gateway: Set on the recorder

Max. number of 73VR3100 connected simultaneously: 2

0 – 49 % used: Green bargraph

50 – 79 % used: Amber bargraph

80 – 100 % used: Red bargraph

• Hot Swapping of the CF Card

The CF Card is hot swappable: removable during data

recording. However, there may be a slight disturbance in

storing rate when the card is inserted.

• Screen Saver

The backlight is automatically turned off if the screen is

untouched for a certain time period.

• Bus Error Alert

An alarm contact is output at a specified channel of the R3-

DC16, R3-DC32A and R3-DAC16A in case of internal bus

error. (Only 1 channel can be specified.)

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 12/14

http://www.m-system.co.jp/

MODEL: 73VR3100

• Writing/Reading Setting

The recorder’s present setting can be stored in a USB flash-

memory. Setting stored in the memory can be read in to the

73VR3100.

• Trend View Storing Data

Display trend view data storable in CF card even while

"stop" operating status (only in Chart speed: 4 or 1)

■ STORABLE TIME DURATION IN 1GB CF CARD

STORING

RATE

APPROXIMATE TIME DURATION

16 ch input

approx. 3 days

4 ch input

approx. 9 days

approx. 46 days

8 ch input

approx. 5 days, 8 hours

32 ch input

64 ch input

---

20 millisec.

0.1 seconds

0.5 seconds

1 second

10 seconds

1 minute

---

approx. 27 days, 16 hours approx. 15 days 8 hours

approx. 231 days

approx. 1 year, 97 days

10 years minimum

approx. 138 days

approx. 277 days

approx. 77 days

approx. 154 days

40 days

81 days, 16 hours

20 days, 16 hours

approx. 42 days

approx. 7 years, 222 days approx. 4 years, 83 days approx. 2 years, 86 days approx. 1 year 55 days

10 years minimum 10 years minimum 10 years minimum approx. 6 years 335 days

--- : Not Applicable

Note 1: Data are calculated ones, and thus not guaranteed.

Note 2: Assuming 4 bytes per data per channel.

Note 3: A year is calculated as 365 days.

SYSTEM CONFIGURATION EXAMPLES

■ INDEPENDENTLY USED

Paperless Recorder

(models: 73VR3100)

■ INTERFACING WITH A PC

• Reading Data from CF Card

• Ethernet Connection

Data Viewer

(model: 73VRWV)

PC Recorder Software

(model: MSR128)

CF Card

Ethernet

Card Reader

Switch / Hub

Ethernet

Paperless Recorder

(models: 73VR3100)

Paperless Recorder

(models: 73VR3100)

Note: It is recommended to connect the 73VR3100 to the PC using

straight cables via a switch/hub on the Ethernet.

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 13/14

http://www.m-system.co.jp/

MODEL: 73VR3100

■ INTERFACING WITH A PLC/DCS USING A NETWORK MODULE

PC

PC Recorder Software

(model: MSR128)

PLC, DCS

Ethernet

Open Field Network

Switch / Hub

Ethernet

Paperless Recorder

(models: 73VR3100)

Specifications are subject to change without notice.

73VR3100 SPECIFICATIONS

ES-7397 Rev.30 Page 14/14

http://www.m-system.co.jp/


型号：	73VR3100-N-M2
厂家：	M-SYSTEM
描述：	Paperless Recording System
文件：	总14页 (文件大小：384K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

73VR3100-N-M2 [MSYSTEM]

相关型号：

73VR3100-N-M2/Q

73VR3100-N-R

73VR3100-N-R/Q

73WE4R020F

73WE4R020J

73WE4R470F

73WE4R470J

73WE6R020F

73WE6R020J

73WE6R470F

73WE6R470J

73WE7R020F