CLSC-60 [MSYSTEM]
CLAMP-ON CURRENT SENSOR;
| 型号： | CLSC-60 |
| 厂家： | 
M-SYSTEM |
| 描述： | CLAMP-ON CURRENT SENSOR |
| 文件： | 总2页 (文件大小：83K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: CLSC
CLAMP-ON CURRENT SENSOR
(1A output)
GENERAL SPECIFICATIONS
Construction: Clamp
Functions & Features
Connection: M3 screw terminals (torque 0.3 N·m)
Housing material: Flame-resistant resin (black)
Detachable number of times: Approx. 100 times
•Easy-to-install, spring-loaded, clamp-on type current
sensor
•Over-voltage clamp element for safety in open circuit
•1 A output
INPUT SPECIFICATIONS
Max. working voltage: 480 V AC (primary side)
Overload capacity: 120 % continuous, 4000 % for 1 minute
Operational range
•Wide frequency band
•Up to 20 kHz harmonic contents
•Screw terminal connection
CLSC-10: ≤ 100 A
CLSC-25: ≤ 250 A
CLSC-50: ≤ 500 A
CLSC-60: ≤ 600 A
INSTALLATION
Operating temperature: -20 to +60°C (-4 to +140°F)
Operating humidity: 80 % RH max. (non-condensing)
Mounting: Fix with a binding strap.
Weight:
MODEL: CLSC–[1]
CLSC-10: 170 g (0.37 lbs)
ORDERING INFORMATION
• Code number: CLSC-[1]
CLSC-25: 175 g (0.39 lbs)
CLSC-50: 250 g (0.55 lbs)
Specify a code from below for [1].
(e.g. CLSC-10)
CLSC-60: 265 g (0.58 lbs)
PERFORMANCE
Frequency: 50 / 60 Hz
[1] INPUT
10: 100 A
25: 250 A
50: 500 A
60: 600 A
Rated primary current / rated secondary current
CLSC-10: 100 A / 1 A
CLSC-25: 250 A / 1 A
CLSC-50: 500 A / 1 A
CLSC-60: 600 A / 1 A
Ratio error: ±1.0 %, 1.0 In
Phase displacement error
CLSC-10: +2±1°, 1.0 In
CAUTION
Before you remove the sensor module or mount it, turn off
the input signal for safety. While the line is alive, the
module’s cores, attracted to each other, may be hard to
separate.
CLSC-25, -50, -60: +1±1°, 1.0 In
Insulation resistance: ≥ 100 MΩ with 500 V DC
(sensor core to output)
Dielectric strength: 2000 V AC @ 1 minute
(sensor core to output)
RELATED PRODUCTS
AC current, watt, power factor transducers with 1 A input
•CT input module (model: R3-CT4)
•Multi power input module (model: R3-WT1)
•AC power input module (model: R3-WT4)
•AC current transducer (model: 14CE)
•AC current transducer (model: LTCE)
•CT transmitter (model: CT)
•CT transmitter (model: KCE)
•CT transmitter (model: M2CE)
•CT transmitter (model: M5CT)
•Multi power monitor (model: 53U, 54U)
http://www.m-system.co.jp/
CLSC SPECIFICATIONS
ES-9298 Rev.3 Page 1/2
MODEL: CLSC
DIMENSIONS unit: mm (inch)
■ Sensor model No.: CLSC-10, 25
2–M3 SCREW
TERMINAL
4 (.16)
34 (1.34)
4 (.16)
74.5 (2.93)
49.5 (1.95)
24 (.94) dia.
L
K
TERMINAL COVER
(removable)
■ Sensor model No.: CLSC-50, 60
2–M3 SCREW
TERMINAL
4 (.16)
40.5 (1.59)
4 (.16)
91 (3.58)
61 (2.40)
36 (1.42) dia.
L
K
TERMINAL COVER
(removable)
Specifications are subject to change without notice.
http://www.m-system.co.jp/
CLSC SPECIFICATIONS
ES-9298 Rev.3 Page 2/2
相关型号：
©2020 ICPDF网 联系我们和版权申明