F2PP-31N-R/Q 概述
Super-mini Signal Conditioners F2 Series
F2PP-31N-R/Q 数据手册
通过下载F2PP-31N-R/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: F2PP
Super-mini Signal Conditioners F2 Series
[3] OUTPUT LOGIC
N: The same as the input
R: Inverted
PULSE ISOLATOR
Functions & Features
• Galvanically isolating pulse rate signals
• Input frequency = output frequency
• Various outputs (open collector and voltage pulses)
• High-density mounting
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Typical Applications
[4] OPTIONS
blank: none
• Isolating field pulse signals in order to reduce noises
• Changing e.g. dry contact signal to e.g. 5 V signals
/Q: With options (specify the specification)
22.5 (.89)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
75
(2.95)
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Construction: Stand-alone; terminal access at the front
107
(4.21)
mm (inch)
Connection: Euro type connector terminal
(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
MODEL: F2PP–[1][2][3]–R[4]
Frequency range: Input and output are the same.
Chattering protection: Filter provided for mechanical
contact input
ORDERING INFORMATION
• Code number: F2PP-[1][2][3]-R[4]
Specify a code from below for each of [1] through [4].
(e.g. F2PP-33N-R/Q)
Input pulse sensing: DC coupled
• Frequency range (e.g. 0 – 1000 Hz)
• Specify the specification for option code /Q
(e.g. /C01)
INPUT SPECIFICATIONS
Excitation: 12 V DC @30 mA; shortcircuit protection
■ Open Collector
Sensing: Approx. 12 V DC @ 3 mA
ON/OFF level: ≤ 200 Ω / 0.6V for ON, ≥ 100 kΩ / 6V for OFF
Low frequency open collector output
Maximum frequency: 30 Hz
[1] INPUT
1: Mechanical contact (max. 30 Hz)
2: Open collector (max. 10 kHz)
3: Voltage pulse (max. 10 kHz)
Pulse width time requirement: 10 msec. min. for ON and
OFF
Note: When the output signal is Low frequency open
collector, the max. input frequency is 30 Hz.
High frequency open collector output
Maximum frequency: 10 kHz
Pulse width time requirement: 10 μsec. min. for ON and OFF
■ Mechanical Contact
[2] OUTPUT
1: Low frequency open collector (max. 30 Hz)
2: High frequency open collector (max. 10 kHz)
3: 5 V pulse (max. 10 kHz)
Maximum frequency: 30 Hz
Pulse width time requirement: 10 msec. min. for ON and
OFF
4: 12 V pulse (max. 10 kHz)
Sensing: Approx. 12 V DC @3 mA
ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF
■ Voltage Pulse: Square or sine waveforms
Low frequency open collector output
Maximum frequency: 30 Hz
5: 24 V pulse (max. 10 kHz)
F2PP SPECIFICATIONS
ES-5438 Rev.6 Page 1/3
http://www.m-system.co.jp/
MODEL: F2PP
Pulse width time requirement: 10 msec. min. for ON and
OFF
EN 50581
Approval:
High frequency open collector output
Maximum frequency: 10 kHz
UL/C-UL general safety requirements
(UL 3111-1, CAN/CSA-C22.2 No.1010-1)
Pulse width time requirement: 10 μsec. min. for ON and OFF
Voltage range: -30 – +30 V DC
Hi/Lo level: 2 – 30 V for high level; ≤ 1 V for low level
Input impedance: 10 kΩ minimum
OUTPUT SPECIFICATIONS
■ Low Frequency Open Collector:
50 V DC @100 mA (resistive load)
Maximum frequency: 30 Hz
Timer: Limits within 75 ±25 msec.
for wider than 75 msec. pulses
ON time for output logic non-inverted
OFF time for output logic inverted
Saturation voltage: 0.5 V DC
■ High Frequency Open Collector:
50 V DC @100 mA (resistive load)
Maximum frequency: 10 kHz
Saturation voltage: 0.5 V DC
■ Voltage Pulse
Maximum frequency: 10 kHz
High level: Rating (5, 12 or 24 V) ±10 %
Low level: ≤ 0.5V
Load resistance:
≥ 250 Ω for 5 V
≥ 600 Ω for 12 V
≥ 1200 Ω for 24 V
INSTALLATION
Current consumption
•DC: Approx. 80 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail
Weight: 150 g (0.33 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
F2PP SPECIFICATIONS
ES-5438 Rev.6 Page 2/3
http://www.m-system.co.jp/
MODEL: F2PP
OUTPUT LOGIC
VOLTAGE PULSE
OUTPUT
OPEN COLLECTOR
OUTPUT
INPUT TYPE
PULSE LOGIC
Non Inverted
INPUT
H
H
OFF
L
L
ON
Voltage Pulse
H
H
OFF
Inverted
Non Inverted
Inverted
L
L
ON
OFF
H
OFF
ON
L
ON
Mechanical Contact
Open Collector
OFF
H
OFF
ON
L
ON
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
DIN RAIL
35mm wide
1
2 3 4
5
6 7 8
22.5 (.89)
107 (4.21)
[1.5 (.06)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Isolation
*
Waveform
Shaper
Output
Driver
+
–
+
–
+
–
1
2
3
4
Timer
5
6
7
8
INPUT
OUTPUT
POWER
SENSOR EXCITATION
+
12V Supply
*Low freq. open collector only.
■ Voltage Pulse
Input Connection Examples
Output Connection Examples
■ Mechanical Contact or
Open Collector
■ Open Collector
■ Voltage Pulse
+
–
–
+
+
–
+
+
–
–
+
+
–
+
+
–
+
–
+
–
+
–
1
2
3
1
2
3
5
6
5
6
+12V
+12V
PWR
PWR
4kΩ
Specifications are subject to change without notice.
F2PP SPECIFICATIONS
ES-5438 Rev.6 Page 3/3
http://www.m-system.co.jp/
F2PP-31N-R/Q 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
F2PP-31R-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-31R-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-32N-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-32N-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-32R-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-32R-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-33N-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-33N-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-33R-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 | |
F2PP-33R-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
F2PP-31N-R/Q 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6