概述
数据手册F2TS-13-R/BL 概述
Super-mini Signal Conditioners F2 Series
F2TS-13-R/BL 数据手册
通过下载F2TS-13-R/BL数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: F2TS
8: S (Usable range -50 to +1760°C, -58 to +3200°F)
Super-mini Signal Conditioners F2 Series
N: N (Usable range -270 to +1300°C, -454 to +2372°F)
0: Specify
THERMOCOUPLE TRANSMITTER
Functions & Features
[2] OUTPUT
Current
• Accepting direct input from a thermocouple and providing
a standard process signal
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
E: 0 – 16 mA DC (Load resistance 900 Ω max.)
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
• 5-segment linearization
• Burnout protection
• High-accuracy cold junction compensation
• Fast response type available
• High-density mounting
Typical Applications
• High-accuracy cold junction compensation benefits narrow
span measurements
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
• 0.1 μA burnout sensing enables long distance
transmission with minimum offset drifts
• Electric furnace (isolation)
• No burnout type can connect to a single T/C in parallel
with a recorder
22.5 (.89)
POWER INPUT
DC Power
75
(2.95)
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
107
(4.21)
[3] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Burnout
mm (inch)
MODEL: F2TS-[1][2]-R[3]
blank: Upscale burnout
ORDERING INFORMATION
• Code number: F2TS-[1][2]-R[3]
Specify a code from below for each of [1] through [3].
(e.g. F2TS-2A-R/BL)
/BL: Downscale burnout
/BN: No burnout
Other Options
blank: none
• Temperature range (e.g. 0 – 800°C)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01)
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
[1] INPUT THERMOCOUPLE
/C02: Polyurethane coating
1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)
2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)
7: R (Usable range -50 to +1760°C, -58 to +3200°F)
F2TS SPECIFICATIONS
ES-5412 Rev.6 Page 1/3
http://www.m-system.co.jp/
MODEL: F2TS
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V
GENERAL SPECIFICATIONS
Construction: Stand-alone; terminal access at the front
Connection: Euro type connector terminal
INSTALLATION
Current consumption
(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
•DC: Approx. 80 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Linearization: Standard
Weight: 150 g (0.33 lb)
Cold junction compensation: CJC sensor attached to the
input terminals (B thermocouple is without CJC as standard)
PERFORMANCE in percentage of span
Accuracy: ±0.4 % (at over 400°C or 750°F for R, S and PR;
over 770°C or 1420°F for B)
INPUT SPECIFICATIONS
Minimum span: 3 mV
Cold junction compensation error
Offset: Max. 1.5 times span
Input resistance: 30 kΩ min.
Burnout sensing: 0.1 μA
(at 20°C ±10°C or 68°F ±18°F)
K, E, J, T, N: ±0.5°C or ±0.9°F
S, R, PR: ±1°C or ±1.8°F
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
(at over 400°C or 750°F for R, S and PR; over 770°C or
1420°F for B)
Minimum span (in °C)
(PR): min. span 370°C
K (CA): min. span 75°C
E (CRC): min. span 50°C
J (IC): min. span 60°C
T (CC): min. span 75°C
B (RH): min. span 780°C
R: min. span 360°C
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
S: min. span 380°C
STANDARDS & APPROVALS
EU conformity:
N: min. span 110°C
EMC Directive
Minimum span (in °F)
(PR): min. span 670°F
K (CA): min. span 140°F
E (CRC): min. span 90°F
J (IC): min. span 110°F
T (CC): min. span 140°F
B (RH): min. span 1410°F
R: min. span 650°F
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Approval:
UL/C-UL general safety requirements
(UL 3111-1, CAN/CSA-C22.2 No.1010-1)
S: min. span 690°F
N: min. span 200°F
Note: The described accuracy may be partially not satisfied
when the temperature ranges below 0°C. Consult factory.
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 15 V max.
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
F2TS SPECIFICATIONS
ES-5412 Rev.6 Page 2/3
http://www.m-system.co.jp/
MODEL: F2TS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CJC SENSOR (model: CJM)
DIN RAIL
35mm wide
1
2 3 4
5
6 7 8
22.5 (.89) 2.5 (.10)
107 (4.21)
[1.5 (.06)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
comp. leadwire
T / C
Z
S
Isolation
+
Low Drift
Amplifier
Output
Driver
+
1
5
6
7
8
+
–
+
–
Linearizer
OUTPUT
POWER
–
metal leg
–
2
3
4
*
CJC
SENSOR
CJC Sensing
Volt. Generator
model: CJM
*Deleted with B thermocouple.
Specifications are subject to change without notice.
F2TS SPECIFICATIONS
ES-5412 Rev.6 Page 3/3
http://www.m-system.co.jp/
F2TS-13-R/BL 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| F2TS-13-R/K | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-13-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-14-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-14-R/BL | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-14-R/K | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-14-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-15-R | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-15-R/BL | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-15-R/K | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
| F2TS-15-R/Q | MSYSTEM | Super-mini Signal Conditioners F2 Series | 获取价格 |
|
F2TS-13-R/BL 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
