FAP-55-P [MSYSTEM]
Space-saving Plug-in Signal Conditioners F-UNIT;型号: | FAP-55-P |
厂家: | M-SYSTEM |
描述: | Space-saving Plug-in Signal Conditioners F-UNIT |
文件: | 总4页 (文件大小:128K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: FAP
Space-saving Plug-in Signal Conditioners F-UNIT
[2] OUTPUT
1: Open collector (max. 1 kHz)
2: 5 V pulse (max. 1 kHz)
DC/FREQUENCY CONVERTER
Functions & Features
5: Photo MOSFET relay pulse (max. 30 Hz)
• Providing a pulse rate output in proportion to DC input
signal
[3] POWER INPUT
• High-density mounting
AC Power
K: 85 – 132 V AC
Typical Applications
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
L: 170 – 264 V AC
• Totalizing applications in combination with a counter
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
DC Power
R: 24 V DC
26 (1.02)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
100
(3.94)
[4] OPTIONS
blank: none
137
(5.39)
/Q: With options (specify the specification)
mm (inch)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: FAP–[1][2]–[3][4]
/C02: Polyurethane coating
ORDERING INFORMATION
• Code number: FAP-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. FAP-61-K/Q)
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
• Special input range (For codes Z & 0)
• Output frequency range (e.g. 0 – 500 Hz)
• Specify the specification for option code /Q
(e.g. /C01/S01)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
[1] INPUT
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Zero adjustment: 0 – 5 % (front)
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
Z: Specify current (See INPUT SPECIFICATIONS)
( 0 % input must be 0 mA.)
Span adjustment: 95 to 105 % (front)
INPUT SPECIFICATIONS
■ DC Current:
Voltage
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■ DC Voltage: 0 – 300V DC
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
( 0 % input must be 0 V.)
Minimum span: 1V
Input resistance: 1 MΩ min.
FAP SPECIFICATIONS
ES-1451 Rev.11 Page 1/4
http://www.m-system.co.jp/
MODEL: FAP
Operating humidity: 30 to 90 %RH (non-condensing)
OUTPUT SPECIFICATIONS
■ Open Collector: 30 V DC @100 mA (resistive load)
Frequency range: 0 – 10 pulses/hour through 1 kHz
Saturation voltage: 0.6 V DC
Mounting: Surface or DIN rail; Standard Rack Mounting
Frame BX-16H available
Weight: 190 g (0.42 lb)
■ 5 V Pulse
Frequency range: 0 – 10 pulses/hour through 1 kHz
Hi level: 3.0 – 5.5 V
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Lo level: ≤ 0.5 V
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: Approx. 3 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength
Load resistance: 250 Ω min.
■ Photo MOSFET Relay Pulse
Frequency range: 0 – 10 pulses/hour through 30 Hz
Timer: Limits ON time within 75 ±25 msec.
Rating: 132 V AC @ 200 mA (cos ø = 1)
30 V DC @ 200 mA (resistive load)
ON resistance: ≤ 2 Ω
Power input code R:
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
500 V AC @ 1 minute (I/O to power)
Power input code K, L, P:
OUTPUT PULSE WIDTH
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
1500 V AC @ 1 minute (I/O to power)
■ Frequency less than 500 Hz at 100% input
➞ Duty ratio 20% (See the figure below)
• Open Collector
• Voltage Pulse
OFF
H Level
ON
L Level
20
%
20%
80%
80%
1 / f
1 / f
■ Frequency greater than 500 Hz at 100% input
➞ See the figure and equation below.
• Open Collector
• Voltage Pulse
OFF
H Level
ON
L Level
Pulse Width
Pulse Width
1
Pulse Width [millisec.] =
2.09 × 100% Frequency [kHz]
■ Photo MOSFET Relay Pulse
➞ See the figure below. ON pulse width is limited
within 75 25 msec. when the output frequency
gets low (below 2 to 4 Hz).
• Photo MOSFET Relay Pulse
OFF
ON
20
%
80
%
1 / f
INSTALLATION
Power consumption
•AC: Approx. 4.5 VA
•DC: 24 V approx. 70 mA
110 V approx. 20 mA
Operating temperature: -5 to +55°C (23 to 131°F)
FAP SPECIFICATIONS
ES-1451 Rev.11 Page 2/4
http://www.m-system.co.jp/
MODEL: FAP
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
1
2
15
(.59)
DIN RAIL
35mm wide
3
4
2–4.5 (.18)
HOLE
15 (.59) deep
5
6
8–M3.5
SCREW
7
8
26 (1.02)
107 (4.21)
137 (5.39)
26 (1.02)
[3.3 (.13)]
•When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM)
1
2
3
4
5
6
7
8
Input shunt resistor attached
for current input.
FAP SPECIFICATIONS
ES-1451 Rev.11 Page 3/4
http://www.m-system.co.jp/
MODEL: FAP
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Low Drift
Amplifier
Volt. / Freq.
Converter
Output
Driver
+
–
1
2
3
4
5
6
7
8
+
Divider
*
INPUT
R
OUTPUT
–
U(+)
V(–)
POWER
Base Socket
*Input shunt resistor attached for current input.
Output Connection Examples
■ Open Collector
■ Photo MOSFET Relay Pulse
• AC Powered
Relay or
Counter Coil
+
–
+
–
5
6
5
6
Varistor or Spark
Quenching Circuit
LOAD
U
■ Voltage Pulse
• DC Powered
Relay or
Counter Coil
+
–
+
–
5
6
5
6
Spark Quenching
Diode
LOAD
Specifications are subject to change without notice.
FAP SPECIFICATIONS
ES-1451 Rev.11 Page 4/4
http://www.m-system.co.jp/
相关型号:
FAP-6001-1104-2-0AS
Board Connector, 60 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Blue Insulator, Receptacle
YAMAICHI
FAP-6001-2102-2-0BS
Board Connector, 60 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Blue Insulator, Receptacle
YAMAICHI
FAP-6001-4004-2-0AS
Board Connector, 60 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Blue Insulator, Receptacle
YAMAICHI
FAP-6001-4004-2-0BS
Board Connector, 60 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Blue Insulator, Receptacle
YAMAICHI
FAP-6001-4102-2-0AS
Board Connector, 60 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Blue Insulator, Receptacle
YAMAICHI
FAP-6001-4102-2-0BS
Board Connector, 60 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Blue Insulator, Receptacle
YAMAICHI
©2020 ICPDF网 联系我们和版权申明