FJR-5A-L [MSYSTEM]
Space-saving Plug-in Signal Conditioners F-UNIT;型号: | FJR-5A-L |
厂家: | M-SYSTEM |
描述: | Space-saving Plug-in Signal Conditioners F-UNIT |
文件: | 总3页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: FJR
Note: Consult M-System for 2-wire RTD
Space-saving Plug-in Signal Conditioners F-UNIT
[2] OUTPUT
Current
RTD TRANSMITTER
(field-programmable)
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
Voltage
Functions & Features
• Accepting direct input from an RTD and providing a
standard process signal
6: 1 – 5 V DC (Load resistance 500 Ω min.)
• Micro-processor based
• Field-programmable temperature range
• Linearization
[3] POWER INPUT
AC Power
• Burnout protection
K: 85 – 132 V AC
• Loop testing via hand-held programmer PU-2x
• High-density mounting
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
L: 170 – 264 V AC
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
DC Power
Typical Applications
• Ideal for quick spare part
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
26 (1.02)
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
100
(3.94)
[4] OPTIONS (multiple selections)
Burnout
blank: Upscale burnout
/BL: Downscale burnout
137
(5.39)
Other Options
mm (inch)
blank: none
/Q: Option other than the above (specify the specification)
MODEL: FJR–[1][2]-[3][4]
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ORDERING INFORMATION
• Code number: FJR-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. FJR-1A-K/BL/Q)
/C02: Polyurethane coating
/C03: Rubber coating
• Temperature range (e.g. 0 – 500°C)
• Specify the specification for option code /Q
(e.g. /C01/S01)
TERMINAL SCREW MATERIAL
/S01: Stainless steel
RELATED PRODUCTS
• Programming Unit (model: PU-2x)
[1] INPUT RTD (2- or 3-wire)
1: JPt 100 (JIS'89)
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F)
3: Pt 100 (JIS'89)
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)
4: Pt 100 (JIS'97, IEC)
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)
5: Pt 50 Ω (JIS'81)
GENERAL SPECIFICATIONS
Construction: Plug-in
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F)
6: Ni 508.4 Ω
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F)
0: Specify
FJR SPECIFICATIONS
ES-1464 Rev.9 Page 1/3
http://www.m-system.co.jp/
MODEL: FJR
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Linearization: Standard
Adjustments: Programming Unit (model: PU-2x);
(Refer to the users manual of JXCON for the adjustments
configurable with JXCON.)
• RTD type (between Pt 100 and JPt 100 only)
• temp. range
• zero and span
• simulating output
• Others
INPUT SPECIFICATIONS
Maximum leadwire resistance: 20 Ω per wire (3-wire)
Sensing current: 2 mA (Pt)
If not specified, the input range is shown below.
1: JPt 100 (JIS '89) 0 – 100°C
3: Pt 100 (JIS '89) 0 – 100°C
4: Pt 100 (JIS '97, IEC) 0 – 100°C
5: Pt 50 Ω (JIS '81) 0 – 200°C
6: Ni 508.4 Ω 0 – 100°C
INSTALLATION
Power input
•AC: Approx. 4.5 VA
•DC: 24 V approx. 70 mA
110 V approx. 20 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail; Standard Rack Mounting
Frame BX-16H available
Weight: 220 g (0.49 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 % or ±0.1°C (±0.18°F), whichever is greater
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength
Power input code R:
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
500 V AC @ 1 minute (I/O to power)
Power input code K, L, P:
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
1500 V AC @ 1 minute (I/O to power)
FJR SPECIFICATIONS
ES-1464 Rev.9 Page 2/3
http://www.m-system.co.jp/
MODEL: FJR
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
1
2
15
(.59)
DIN RAIL
35mm wide
3
4
2–4.5 (.18)
HOLE
15 (.59) deep
5
6
8–M3.5
SCREW
7
8
26 (1.02)
107 (4.21)
137 (5.39)
26 (1.02)
[3.3 (.13)]
•When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
RTD
1
2
3
4
A
B
B
Isolation
Low Drift
Amplifier
Digital
Computation
Output
Driver
5
6
7
8
+
OUTPUT
–
Reference
Resistor
Constant
Current
U(+)
V(–)
POWER
MODULAR JACK
PU-2x
SERIAL TRANSMISSION LINE
Base Socket
Specifications are subject to change without notice.
FJR SPECIFICATIONS
ES-1464 Rev.9 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明